Thies 4.3350.10.000 iegādāties lietotu (459)

Stāvoklis: teju kā jauns (lietots), Funkcionalitāte: pilnībā funkcionāls, Weiler precision centre lathe Model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C (NEW). Geometrically overhauled with acceptance protocol according to new machine tolerances. Technical data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm Lhodpfxowrm Dts Al Ijn >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting possible: metric, imperial, module and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Approximate weight: 1100 kg >> Spindle brake selectable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and features: >> 3-axis digital readout system from K&C (new), 12 months manufacturer's warranty, including operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, reading halving, reference point, tool programming (200 memories), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> Collet chuck system (NEW), new collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws (NEW) >> Multifix size B (NEW) with 3 tool holders >> Bed stop >> Electric chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor 81 lead and feedscrew lathe in very good, geometrically overhauled condition. Guideways have been reground and/or hand-scraped. Acceptance is according to inspection protocol. The accessories (collets, chucks) are new. Safety features: The machine is equipped with a brake motor, electronic spindle guard and two emergency stop switches—a lathe in absolutely as-new condition. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-like surface finishes. You are welcome to view the machine under power on-site to see its condition for yourself.

Stāvoklis: darbnicā atjaunots (lietots), Ražošanas gads: 2016, X assis pārvietošanās distance: 6 500 mm, Y ass pārvietošanās attālums: 1 800 mm, Z ass pārvietošanās attālums: 1 300 mm, barošanas garums X ass: 10 000 mm, barošanas gājiens Y asī: 10 000 mm, padeves garums Z assī: 10 000 mm, ātrā padeve X assī: 35 m/min, ātrgaita Y ass: 35 m/min, ātrā pārvietošana pa Z asi: 35 m/min, vārpstas ātrums (maks.): 7 000 apgr./min, vārpstas ātrums (min.): 20 apgr./min, galda garums: 8 000 mm, galda platums: 1 100 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2016 Travel/capacities: Longitudinal (X): mm 6,500 Vertical (Y): mm 1,800 Cross (Z): mm 1,300 Table size: Length: mm 8,000 Width: mm 1,100 Number of T-slots on table surface: units: 7 T-slot width: mm 22 Distance between slots: mm 140 Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle KW 43 Spindle speed range: Max. spindle speed: min⁻¹ 20 – 7,000 Torque: Nm 900 Feed rates: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse: X, Y and Z axis mm/min 35,000 Floor space SLP8000 (without enclosure): m 13.0 x 4.5 Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Lhsdsxvx Amopfx Al Ien Automatic milling head, Diagonal H207 Adapter: angle milling head SK50 with Hirth coupling Automatic tool changer with 60 magazine positions Chip conveyor Preparation / integration for NC rotary table Adaptive Control ACCURA HEADS Coolant system 2 RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us through a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 1995, Funkcionalitāte: pilnībā funkcionāls, Weiler Praktikant 160 AC Precision Centre Lathe 3-axis Digital Readout Weiler with AC drive, stepless spindle speed, CE marking!!!!! Technical Data: Lodpfx Aljy Ulqwo Iehn >> Year of manufacture: 1995 Machine no. 3820 >> Centre height: 160 mm >> Centre width (distance between centres): 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: Metric, Inch, Module and Diametral-Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight approx.: 1000 kg >> Switchable spindle brake >> Machine dimensions approx.: 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and Equipment: >> 3-axis digital readout by Weiler >> Quick-change collet chuck with collets from 2 to 28 mm, increments of 1 mm >> New 3-jaw chuck 160 mm with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the work spindle, lead and feed shaft covers, brake motor, 2 emergency stop switches, electrical protection switch for the gear housing About the machine: On offer is a Weiler Praktikant AC lead and feed screw lathe, year 1995, in excellent condition. A very fine lathe with AC drive and stepless spindle speed control. The slides all move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The machine features CE marking. It comes from a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. The digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Stāvoklis: lietots, Ražošanas gads: 2000, iekārtas/transportlīdzekļa numurs: 11197, Hundegger K2-450 joinery line – Year of manufacture 2000 For sale is a used Hundegger K2-450 joinery machine, year 2000, from ongoing production. The machine was used for processing timber components in timber frame and wooden house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The system can be viewed under power by appointment. Technical data: Manufacturer: Hundegger Model: K2-450 Year of manufacture: 2000 Machine no.: 11197 Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system included Machine was in production until recently Sale due to modernization or production restructuring Dismantling and loading by arrangement On-site inspection strongly encouraged This machine is ideally suited for carpentry shops, timber construction companies, and businesses in the joinery sector seeking a proven and robust Hundegger system. For further information, technical details, additional photos, or to arrange a viewing appointment, please do not hesitate to contact us. Lhedpezbnkfsfx Al Ien

Stāvoklis: gatavs lietošanai (lietots), Ražošanas gads: 2023, tintes kasetņu skaits: 4, krāsu kanāli: 4, drukas galvu skaits: 4, maksimālais papīra svars: 350 g/m², papīra platums (maks.): 330 mm, papīra augstums (min.): 1 mm, maksimālais papīra augstums: 1 300 mm, barošu paplāšu skaits: 3, skaitītāja rādījums (melns): 111 572, skaitītāja rādījums (krāsa): 296 115, pēdējās kapitālremonta gads: 2026, Aprīkojums: automātiskais duplekss, brošūru pabeigšanas iekārta, dokumentācija / rokasgrāmata, rastra attēlu apstrādātājs, An authorized Canon Production partner is selling Canon imagePress V900 (90ppm) cut-sheet digital press. The printer is in excellent condition, has been on service contract since 2023.02 until this day. Configuration: - CANON ImagePress V900 main unit (90ppm license) - Multi-drawer Paper Deck-E1 - Booklet Finisher AG1 - Duplex Color Image Reader Unit-P1 - PRISMAsync iPR V900 - Stack Bypass-D1 - Stack Bypass Alignment Tray-D1 - Inline Spectro Counters: Total (All) 535 659 Total (Black/Large) 111 572 Total (Black/Small) 19 160 Ledpfx Alezpxy Sj Iohn Total (Full Color+ Single Color/Large) 296 115 Total (Full Color+ Single Color/Small) 108 812 Total (Black & White / Long Sheet 1 250 Total (Full Color + Single Color/Long sheet 2352 It's possible to check the printer at our premises and do test prints. Printer is located in Riga, Latvia. We will pack it for safe shipping worldwide.

Stāvoklis: lietots, Funkcionalitāte: pilnībā funkcionāls, Ražošanas gads: 1999, celtspēja: 2 900 kg, Skrūvspīļu kronšteins Tehniskais stāvoklis: normāls Apraksts: Vācija KAUP skrūvspīļu kronšteins 1T453 Nr.: R0812 Izgatavošanas gads: 1999 Ražotājs: KAUP Tips: 1T453 Pacelšanas spēja: 2900 kg Kravas masas centrs: 500 mm Paša masas centrs: 340 mm Attālums līdz priekšējai malai: 291 mm Svars: 1085 kg Maksimālais hidrauliskais spiediens: 160 bāri Sērijas numurs: 9003608 KAUP skrūvspīļu kronšteins ir hidraulisks palīglīdzeklis iekrāvējiem, un to var izmantot gan parastai kravu pacelšanai ar dakšām, gan arī atbilstošu kravu fiksēšanai no sāniem. Palīglīdzeklis atrodas lietotā, atbilstošā vizuālā stāvoklī, ņemot vērā tā vecumu. Pirms lietošanas jāveic detalizēta tehniskā pārbaude, kā arī jāpārbauda saderība ar attiecīgo iekrāvēju. Ātra un vienkārša piegāde pēc vienošanās! Šis sludinājums ir paredzēts tikai palīglīdzekļa identificēšanai! Detalizēts apraksts par tā stāvokli un iespējamo aprīkojumu ir pieejams individuāli pēc pieprasījuma! Kļūdas un iepriekšējs pārdošanas gadījums rezervēti. Pārdošana tikai komerciāliem klientiem. Viss lietotais aprīkojums tiek pārdots bez garantijas. Ja neesat atradis piemērotu palīglīdzekli, lūdzu, sazinieties ar mums. Mums ir plašs citu iekārtu un palīglīdzekļu klāsts. Lhsdpfxozt Drho Al Ion Angļu valodā: KAUP Clamp Fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Capacity: 2,900 kg Load centre: 500 mm Centre of gravity: 340 mm Lost load centre: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic forklift attachment and can be used both for conventional handling with the forks and for clamping suitable loads from the sides. The attachment is in used, age-related visual condition. A detailed technical inspection and verification of compatibility with the respective forklift should be carried out before use. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site.

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 2009, X assis pārvietošanās distance: 5 000 mm, Y ass pārvietošanās attālums: 3 500 mm, Z ass pārvietošanās attālums: 2 350 mm, X ass barošanas ātrums: 13 000 m/min, Y ass barošanas ātrums: 13 000 m/min, barošanas ātrums Z ass: 13 000 m/min, kopējais garums: 12 000 mm, kopējais augstums: 4 800 mm, galda platums: 2 000 mm, kopējais platums: 6 800 mm, galda garums: 2 500 mm, urbšanas jauda: 180 mm, rotācijas ātrums (min.): 2 000 apgr./min, barošanas garums W ass: 1 000 mm, Juaristi Table-Type Boring Mill - TS5 MACH-ID 9610 Manufacturer: Juaristi Model: TS5 Control: Heidenhain iTNC530 Year of manufacture: 2009 Coolant through spindle: 20 bar Paper filtration system Automatic tool changer (ATC) with 60 positions Spindle extension: L = 550 mm Full B-axis 360,000° with ROD 880C Table load capacity: 28,000 kg X-axis travel: 5000 mm Y-axis travel: 3500 mm Z-axis travel: 2350 mm W-axis travel: 1000 mm Table length: 2500 mm Table width: 2000 mm Table load: 28000 kg Spindle speed: 2000 rpm Power: 51 kW Tool holder: 180 ISO50 ISO/BT/MK Feed X-axis: 13000 mm/min Feed Y-axis: 13000 mm/min Feed Z-axis: 13000 mm/min Feed W-axis: 13000 mm/min Tool changer: 60 positions CTS (internal coolant): 20 bar Lhsdpfx Aljy Hq Dyj Ijn Number of controlled axes: 5 Length: 12000 mm Width: 6800 mm Height: 4800 mm Weight: 44000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all critical details.

Stāvoklis: teju kā jauns (lietots), Pārdošanā lietots Felder virsmas un biezuma ēveles kombainis AD7-41 ar maksimālo biezuma augstumu līdz 230 mm. Iekārta darbojas kā demonstrācijas modelis mūsu izstāžu zālē un ir teicamā, gandrīz jaunā stāvoklī. Tehniskie dati: - 4 nažu ēveļvārpsta - Ēvelēšanas platums: 410 mm - Virsmas ēveles garums: 2000 mm - Maksimālais caurlaides augstums: 230 mm - Elektriska biezuma augstuma regulācija PowerDrive - Savienojums ar skaidas nosūcēju Ø 120 mm - Motora jauda: 4 kW / 5,4 ZS - Ražošanas gads: 2023 Iekārta atrodas Austrijā, A-5431 Kuchl, un to jebkurā laikā var apskatīt mūsu darba laikā. Iespējama pirmslaicīga pārdošana! Sīkāka informācija pa tālruni 06244-20299. Ljdpfsw Hckrox Al Ijhn Atslēgvārdi: virsmas ēvele, biezuma ēvele, ēvelmašīna, virsma, biezums Atsauce: R-A0117

Stāvoklis: lietots, Ražošanas gads: 2021, Funkcionalitāte: pilnībā funkcionāls, preses spēks: 500 t, ME-Presses Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic portal straightening press from manufacturer ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and features an integrated tool clamping device and parallel guidance for bending tools. Thanks to its traversing table, movable cylinder, and robust construction, it is ideal for flexible applications in tool and die making as well as in series production. === Technical Data & Information: Hydraulic Portal Straightening Press – 500 t === General Information - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Portal press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 === Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm === Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion === Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: dependent on load === Hydraulics & Performance - Pressure adjustment: 80–500 t via rotary controller - Pressure build-up time: max. 3 sec. - Free pull-off force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples === Construction & Equipment - Integrated tool clamping device - Parallel guidance for bending block - Induction-hardened cylinder - Machine frame powder-coated / double painted - T-slots according to customer specification === Operation & Safety - Remote control Lhedpfxowgakve Al Ion - Robust construction for industrial applications === Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) === Straightening, bending processes, tool and die making, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quote. Our hydraulic presses are manufactured in accordance with German machine guidelines as well as European machine directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they fully comply with the Brazilian NR 12 national safety directive, which is based on these standards. Our greatest strength lies in special machine construction and press automation. We offer customised hydraulic presses at surprisingly affordable prices. For the press hydraulics, we predominantly use components from leading European manufacturers.

Stāvoklis: jauns, Funkcionalitāte: pilnībā funkcionāls, The V9 height gauge has been developed for the most demanding users. Laboratories and workshops where measuring reliability is paramount will appreciate its exceptional precision and “Swiss Made” workmanship. Metrological performance was the main focus in the development of this height gauge. No compromises were made regarding precision and repeatability. Consequently, certain design elements, in particular the probe, clearly set it apart from other models. The display, featuring a fully tactile interface, offers a level of user-friendliness unprecedented in vertical measuring instruments. The displayed menus and functions adhere to a very rigorous philosophy and design. This ensures high efficiency, even for complex tasks such as programming, 2D mode, angle measurements, or statistical result analysis. The V9 models are equipped with a revolutionary displacement handwheel that allows the user to select either manual or motorized displacement mode. Measuring ranges: 400 to 1100 mm Exceptional level of precision Electronically adjustable measuring force Manual or motorized movement 2D, programming, statistics Wide range of accessories All settings adjustable without tools RS232 and USB interfaces Wireless data transmission (optional) Models V9: V9 – 400 Measuring range (mm): 406 Lhsdpfsw R Nv Iox Al Ijn Measuring range with extension (mm): 724 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Frontal squareness deviation (µm): 5 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 21 Models V9: V9 – 700 Measuring range (mm): 710 Measuring range with extension (mm): 1028 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Frontal squareness deviation (µm): 8 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 24 Models V9: V9 – 1100 Measuring range (mm): 1109 Measuring range with extension (mm): 1427 Accuracy (µm): 1.2 + L(mm)/1000 Repeatability (µm): 0.4 (Ø: 1) Frontal squareness deviation (µm): 11 Resolution (mm): 0.0001 Measuring force (N): 0.75 ÷ 1.5 Battery autonomy (h): 12 Interfaces: USB / RS232 Air cushion: Yes Weight (kg): 33

Stāvoklis: ļoti labs (lietots), Funkcionalitāte: pilnībā funkcionāls, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock quill: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Features: >> 1 piece 160 mm three-jaw chuck with 1 set of jaws >> 1 piece new 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, 1 mm increments >> Multifix size A with 3 tool holders Lhedpou Aftgofx Al Ion >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Weiler also runs quietly even at high speeds. The Primus was previously used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Stāvoklis: jauns, Apraksts Biezumēšanas/virpošanas ēvele ar TERSA nažu ātrās maiņas sistēmu - TERSA vārpsta ļauj ēveles nažus nomainīt sekundēs - TERSA nažu sistēma nodrošina īpaši klusu darbību - Slīpi zobots tērauda padeves veltnis nodrošina nemainīgu un vienmērīgu koksnes padevi - Īpaši gari virpošanas galdi no viena gabala atvieglo precīzu sagatavju apstrādi - Lielu virpošanas atduri nav nepieciešams noņemt, kad tiek atvērti galdi - Virpošanas galdi atveras uz aizmuguri - Lielais iekārtas svars nodrošina augstāko precizitāti un klusu darbību - Jaudīgs rūpnieciskais motors - Stabils tērauda/pelēkā čuguna rāmis Īpašas iezīmes - Darba galdi izgatavoti no atlaidināta pelēkā čuguna, kas ir izturīgs un ilgi saglabā plakni - Galda malas trokšņu slāpēšanai Aprīkojuma detaļas TERSA ēveles vārpsta: - Nav nepieciešama regulēšana vai skrūvēšana - Nažu maiņa sekundēs - Pašbloķējoša - Īpaši klusa - Perfekts ēvelēšanas rezultāts Nosūces šļūtenes pieslēgums: - Nosūces pieslēgvietas virpošanai un biezumēšanai ir vienā virzienā - Šļūtenes pieslēgšana no vienas puses - Nav nepieciešama šļūtene ap visu iekārtu Piedziņa: - Izturīga ķēdes piedziņa - Piedziņas riteņi no tērauda Ledpfeu Diwlex Al Iehn - Masīvs pelēkā čuguna gultņa korpuss Ēvelēšanas mehānisms: - Masīvi atpakaļsitiena aizsargi novērš sagatavju atgriešanu operatora virzienā - 3-nažu TERSA vārpsta optimālam rezultātam Materiāla padeve: - Slīpi zoboti tērauda padeves veltņi nodrošina vienmērīgu un pastāvīgu materiāla padevi bez iespiedumiem - Vairāki zobi vienlaicīgi nodrošina spēcīgu virzību - Bez nodiluma, atšķirībā no gumijas padeves veltņiem Tehniskie dati - Kopējais virpošanas galdu garums: 1510 mm - Virpošanas darba platums: 300 mm - Maks. skaidas atņemšana virpošanai: 4 mm - Biezumēšanas galda izmēri: 565 x 300 mm - Biezumēšanas darba augstums min.: 3 mm - Biezumēšanas darba augstums maks.: 230 mm - Biezumēšanas padeves ātrums: 7 m/min - Ēvelēšanas vārpstas apgriezieni: 5200 apgr./min - Ēvelēšanas vārpstas diametrs: 72 mm - Nažu skaits: 3 gab. - Elektriskais pieslēgums: 400 V - Motora jauda: 4,0 kW - Nosūces pieslēgvietas diametrs: 2 x 120 mm - Svars: 270 kg - Opcija: Garās atveres urbšanas ierīce, galda izmērs 470 x 220 mm - Opcija: Garās atveres ierīces šķērs-/garenvirziena gājiens: 160 mm / 110 mm - Opcija: Garās atveres ierīces vertikālais gājiens: 120 mm Komplektācija un aprīkojums - TERSA ēveles vārpsta - Anodēta alumīnija virpošanas atdure

Stāvoklis: lietots, Ražošanas gads: 1989, ar pozicionēšanas vadību un Tersa asmeni attīrīts, pārbaudīts funkcionalitātei, testa darbība - Mašīna ieeļļota - Testa darbība - Ievelkšanas veltņi nomainīti - Izvelkšanas veltņi nomainīti - Priekšējā un aizmugurējā gumijas mala nomainīta - Testa ēvelēšana Rezerves daļas: Panhans padeves veltņi, atjaunota vadība lietota, labā stāvoklī Ražotājs: Panhans Ledpfevwfbiex Al Ijhn Tips: 435 Izlaiduma gads: 1989 Mašīnas Nr.: 170 GS pārbaudīts Motors: 5,5 kW / 0,25 kW Ēveles platums aptuveni 510 mm Ēveles augstums aptuveni 250 mm Segmentēts spiediena stienis Gumijas ievelkšanas veltnis Gumijas izvelkšanas veltnis Padeve 7/14 m/min Nažu skaits: 4 gab. Nažu sistēma: Tersa reversējami naži Elektriskā augstuma regulēšana Automātiska pozicionēšanas vadība Skaņas izolācija Nosūkšanas pieslēgums D 160 mm Izmēri aptuveni 1100 mm x 1200 mm x 1200 mm Svars aptuveni 950 kg Kopējā pieslēguma jauda aptuveni 5,75 kW Atrašanās vieta: 97447 Gerolzhofen, brīvi uzkraujams, neiepakojot Pārdošana "kā ir", kā apskatīts, bez garantijas vai atbildības

Stāvoklis: jauns, - JAUNS - Apraksts Ar TERSA nažu vārpstu sekunžu laikā veicamai ēveles nažu nomaiņai TERSA ēveles nažu sistēma nodrošina īpaši klusu darbību Slīpi zobainais tērauda padeves veltnis nodrošina vienmērīgu un stabilu koksnes padevi Īpaši garie izlīdzināšanas galdi, izgatavoti no viena gabala, ļauj viegli apstrādāt sagataves Lielo izlīdzināšanas lineālu var atstāt vietā arī atverot galdu Izlīdzināšanas galdi atveras atpakaļ Lielais iekārtas svars garantē maksimālu precizitāti un klusu darbību Jaudīgs rūpnieciskais motors Izturīga tērauda/pelēkā čuguna konstrukcija. Darba galdi no pelēkā čuguna, termiski apstrādāti un bez iekšējā sprieguma, tāpēc izturīgi un noturīgi pret deformācijām Galda malas nodrošina klusu darbību Aprīkojuma detaļas: TERSA ēveles nažu vārpsta Nav nepieciešama regulēšana vai skrūvēšana Nažu nomaiņa sekundēs Pašbloķējoša Īpaši klusa Perfekts ēvelēšanas rezultāts Nosūces šļūtenes pieslēgums Nosūces pieslēguma uzgaļi gan izlīdzināšanas, gan biezināšanas režīmā ir vienā virzienā. Šļūtenes pieslēgums no vienas puses. Nav nepieciešama šļūtene ap visu iekārtu. Piedziņa Izturīga ķēdes piedziņa Piedziņas riteņi no tērauda Masīvs pelēkā čuguna gultņu balsts Ēveles sistēma Masīvi pretatvirzes drošības elementi novērš sagatavju atsitienu TERSA ēveles nažu vārpsta ar trīs nažiem optimālam ēvelēšanas rezultātam Materiāla padeve Slīpi zobainie tērauda padeves veltņi vienmērīgai materiāla padevei bez iespiedumiem Vairāki zobi vienlaicīgi nodrošina spēcīgu padevi Nodilumizturīgi, salīdzinot ar gumijas padeves veltņiem Lodpfx Alovwga Hj Iohn Tehniskie dati: Izmēri un svars Garums (produkts) apm. 2015 mm Svars (neto) apm. 330 kg Platums/dziļums (produkts) apm. 990 mm Piedziņas jauda Piedziņas motora jauda 5 kW Izlīdzināšana Kopējais galdu garums 1800 mm Maks. skaidas noņemšana izlīdzināšanā 4 mm Darba augstums 900 mm Nosūces pieslēgums Nosūces pieslēguma diametrs biezināšanas režīmā 2 x 120 mm Uzstādīšanas informācija Nepieciešamā garuma vieta 2015 mm Iekārtas korpusa platums/dziļums 596 mm Nepieciešamā platuma/dziļuma vieta 1460 mm Darba laukuma garums 1000 mm Nepieciešamās vietas skaidrojums Izmēri ņem vērā maksimālos pārvietošanas ceļus vai izmantojamā garuma iespējas. Darba laukuma platums/dziļums 3500 mm Iekārtas korpusa garums 659 mm Darba laukuma skaidrojums Norādītos izmērus jāpieskaita nepieciešamajai vietai, lai nodrošinātu iekārtai ieteicamo brīvo uzstādīšanas platību. Biezinātājs Biezināšanas galda garums 605 mm Maks. darba augstums biezināšanai 230 mm Biezināšanas galda platums 420 mm Maks. skaidas noņemšana biezināšanā 4 mm Min. darba augstums biezināšanai 3 mm Elektriskie dati Barošanas spriegums 400 V Strāva AC Fāžu skaits 3 Tīkla frekvence 50 Hz Ēveles nažu vārpsta Vārpstas tips TERSA Vārpstas apgriezienu skaits 5200 min¯¹ Vārpstas diametrs 72 mm Maks. ēvelēšanas platums 410 mm Nažu skaits 3 gab. Padeve Padeves ātrums 7 m/min Komplektācija TERSA ēveles nažu vārpsta Anodēta alumīnija izlīdzināšanas lineāls Nr. 550 3414

Stāvoklis: jauns, - JAUNUMS - Ražotājs: Holzkraft Modelis: FS 41 elite S Tersa Digitāls Digitāls izpildījums ar motorizētu biezuma galda regulēšanu - Ēveles nažu sistēma ļauj nomainīt nažus sekundes laikā un nodrošina īpaši klusu darbību - Īpaši gari ēveles galdi (2200 mm), izgatavoti no viena gabala, nodrošina vieglu sagatavju ēvelēšanu - Darba virsmas izgatavotas no kaļamā čuguna, termiski apstrādātas un bez iekšējiem spriegumiem, tāpēc izturīgas un pastāvīgi līdzenas - Vienlaicīga galdu atvēršana - Galdi nolokās atpakaļ, abus atver reizē, kas nodrošina īsus pārregulēšanas laikus - Jaudīgs rūpnieciskais motors - Stacionāra nosūces pārsegs - Izturīga tērauda/čuguna konstrukcija - Liels ēveles paliktnis (standartā ar palīgatskavu) - Materiāla padeve ar diviem ātrumiem, pateicoties atsevišķam motoram Tehniskie parametri: Galdu kopējais garums: 2200 mm Darba platums: 410 mm Maks. šķēluma biezums: 5 mm Biezinātājs: Biezinātāja galda izmērs: 775x410 mm Min/maks darba augstums: 3/240 mm Padeves ātrumi: 6/12 m/min. Ēveles vārpstas diametrs / nažu skaits: 95 mm / 4 gab. Apgriezienu skaits: 5000 Apgr./min Motors: 400 V/50 Hz/S6 – 40 % 5,0 kW (6,6 ZS) Nosūces pieslēguma diametrs: 1 x 120 mm Svars: 450 kg Artikula Nr.: 550 3441 Atrašanās vieta: 97447 Gerolzhofen Lhsdpjvwgc Uefx Al Ion - bezmaksas uzkraušana -

Stāvoklis: teju kā jauns (lietots), Ražošanas gads: 2024, Pārdošanā ir lietota Hammer A3-41 virsmas un biezuma ēvelmašīna ar darba galda garumu 1800 mm. Iekārtu ir pārbaudījuši mūsu speciālisti, un tā ir teicamā, gandrīz jaunā stāvoklī. Tehniskie dati: - Virsmas/biezuma ēveles platums: 410 mm - 3 asmeņu vārpsta (ar apgriežamiem asmeņiem) - Virsmas galdi atlokāmi katrs atsevišķi - Ēveles žogs pagriežams 90-45° - Biezuma diapazons: 4–225 mm - 5,5 ZS (4 kW) motors / 400 V - Ražošanas gads: 2024 Lhodpfx Aljv Scx Us Ijn - Ierīces Nr.: 52.02.285.24 Iekārta atrodas A-8561 Söding un ir apskatāma jebkurā laikā mūsu darba laikā. Starpniecības pārdošanas tiesības paturam! Saistītie termini: virsmas ēvelmašīna, biezuma ēvelmašīna, ēvele, virsmas ēvele, biezuma ēvele Atsauce: R-L0J2U

Ražošanas gads: 2020, stāvoklis: labi (lietots), Remmert LaserFLEX | Fully Automatic Loading and Unloading – Used – : Ex-works price: now only €119,000 instead of €145,000 (net), plus dismantling etc.! Manufacturer: Remmert Model: LaserFlex Year of manufacture: approx. 2020 Format: 3015 Load capacity: 1,000 kg 220 kg/m2 Maximum sheet dimensions: 3048 x 1524 mm Lsdjwga E Topfx Al Ishn Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet metal storage system (the storage system is not included in the sale) Original price: €250,000 (net) Manufacturer’s description: Equipped with two automation units – one loading and one unloading unit – the LaserFLEX enables de-coupled material handling for laser cutting systems. After the cutting process, a fork unit lifts the processed metal sheet from the shuttle table. Simultaneously, a new sheet from the connected storage facility is transported by a vacuum unit. Once the sheet is staged next to the laser system, the unloader loads the machine with the workpiece. This entire process takes just one minute. With LaserFLEX, downtimes for integrated laser cutting machines are virtually eliminated, as even high-speed lasers are optimally supported. Special features: • Changeover time approx. one minute (for 3015 format) • Highly automated manufacturing processes • Decoupling of loading and unloading for the laser cutting system • Manufacturer-independent integration of laser machines • Flexible storage design with tower or large-scale storage systems • Reduced machine downtimes • Connection of multiple laser systems in line configuration • Integration into existing storage and production environments • Intuitive graphical touch operation with visual status management • Modern industrial design Fast, flexible solution for laser system automation Increases productivity in laser processing Fastest sheet change time on the market Seamless integration into existing production environments Handles all sheet metal cuttings Effective loading and unloading for multiple laser machines Intuitive, graphical touch control with visual status display Innovative, modern industrial design Condition: good Available: immediately Location: 46419 Isselburg

Stāvoklis: jauns, Ražošanas gads: 2025, Markierheld EXKLUSIV XL Industrie 4.0 – 2025 Model Lhsdpfx Alswga Hwe Ion Metals – Plastics and much more! • EZCAD 3 (genuine 64-bit board) supporting up to 4 axes • Compatible with Windows Professional 64-bit • Professional JPT MOPA fiber laser source with 20-watt output and up to 600 kHz (Optional: variable pulse width and up to 2000 kHz for color annealing marking) • “DigiScan Eco 10” scanning unit for exceptional detail and precision • T-slot plate by Isel for easy workpiece mounting and positioning • Large front sliding door with viewing window and certified laser safety glass made in Germany, including monitoring -> Door opening 450 mm • Left side sliding door with monitoring, ideal for long parts -> Door opening 400 mm • Intuitive control panel with Siemens push-buttons • Scan area approx. 100 x 100 mm (optionally 150/200/300 mm) • Motorized height adjustment with focus finder • Freestanding aluminum frame enclosure with two manual doors for simple, user-friendly, and safe marking Laser Class 1 • Stand enclosure base includes Rittal control cabinet and integrated extraction slot • German-made LED workspace lighting • High-performance mini-PC with 32 GB RAM • 21” TFT touchscreen for fatigue-free operation • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel file, network, or database • Laser parameter matrix with 2-variable comparison (e.g. frequency vs speed, frequency vs power) • TCP/IP connectivity – various commands can now be sent via TCP protocol to the software. This allows straightforward integration with external components such as camera-based position detection. • Industry 4.0 capable – real-time monitoring via TCP/IP protocol • I/O ports for automation • 3D preview for rotary axis processing • Up to 50% performance increase through 64-bit technology • Improved system stability • Optional control for up to 4 axes WITHOUT switching via PLUGins • Optional DEEP engraving (slicer software with Z-axis control) • New algorithms for increased engraving speed in hatches • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus check • Connection for external extraction system • Compatible with Windows 10 • USB cable for PC connection • Operating manual and control software in German Available options, among others: => IPG or SPI fiber laser sources with various power ratings => Scanlab equipment => Suitable extraction units => Automation solutions for part handling, conveyor belts, and more! => 3D marking function => Automatic focus adjustment with specialized laser sensor => Rotary device in various versions => Motorized XY stages => Interlock system for marking without protective enclosure, with only personal protective equipment for bulky parts Includes training in Schweinfurt! Our engraving lasers are manufactured at our facility in Schweinfurt! Custom requests are always possible! => Made in Schweinfurt! Images may show optional equipment! We are your partner for laser marking systems – whether manual or automated. We are happy to provide you with a tailored offer.

Stāvoklis: darbnicā atjaunots (lietots), Funkcionalitāte: pilnībā funkcionāls, X assis pārvietošanās distance: 400 mm, Y ass pārvietošanās attālums: 220 mm, Z ass pārvietošanās attālums: 400 mm, vārpstas ātrums (maks.): 2 500 apgr./min, vārpstas ātrums (min.): 25 apgr./min, pēdējās kapitālremonta gads: 2026, Dear Sir or Madam, Lodpox Hr Dzefx Al Iohn We are offering for sale a Deckel FP2 Aktiv. This newer model impresses above all with its infinitely variable spindle speed control featuring Heidenhain Aktiv control, making operation not only easy but also extremely comfortable. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site to see for yourself. Delivery time: on request Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Travel paths: X400mm / Y220mm / Z400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: infinitely variable Equipment and accessories: 3-axis Heidenhain digital readout, infinitely variable feed in all 3 axes, Heidenhain digital readout with Aktiv control, coolant system, central lubrication, technical documentation, machine feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo thorough inspection - All lubricants and, if necessary, worn parts are replaced prior to delivery - Upon request, we can carry out a partial or complete overhaul of your selected machine - On request, you can order additional accessories such as tools, etc., directly - On request, we can fit additional equipment such as safety devices, etc., directly on the machine - We are happy to take care of shipping and/or in-plant installation for you

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 1986, Funkcionalitāte: pilnībā funkcionāls, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis K&C digital readout NEW Technical Data: >> Year of manufacture: 1986 | Machine No. 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: 8 steps, from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread cutting options: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Equipment and Accessories: >> 3-axis digital readout by K&C, new, with 12 months manufacturer’s warranty and operating manual. Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction toggle >> Collet chuck system, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet Ledpfx Aewthbisl Ijhn >> Coolant system About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, built to toolmaker precision in very good condition. The machine is of course fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides run very smoothly and consistently. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is highly user-friendly and enables the production of ground-like surface finishes. Take advantage of the opportunity to view the machine on site under power and convince yourself of its condition.

Stāvoklis: lietots, Funkcionalitāte: pilnībā funkcionāls, ēvelēšanas platums: 540 mm, biezuma ēvelmašīna Steton Ljdpfx Aoy Epz Ssl Ishn

Stāvoklis: jauns, Ražošanas gads: 2024, Osama Automatic 4-Roller Gluing Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for a variety of materials such as MDF, plywood, particle board, composites, and plasterboard. This type of gluing machine enables precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suited to the type of production. The heavy-duty construction and roller cores, manufactured with increased wall thickness compared to previous models, allow for high production rates without issues and the lamination of materials up to 2,200 mm wide. Roller removal for maintenance is a straightforward process, as the supports can be split in two using a simple bayonet coupling. Ledpsu I R Utofx Al Iohn The gluing machine can also be equipped with various accessories, such as an electronic speed controller, automatic roller cleaning unit, and an automatic lifting device for the upper roller with position display on the control panel. The S4R/P gluing machine is suitable for various types of production, including the construction sector and the manufacture of foam boards and mattresses. Features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex-stock 54634 Bitburg - Immediately available -

Ražošanas gads: 2025, stāvoklis: jauns, PREMIUM ECO - Model 2025 - The Marking Champion Among Laser Engravers! Metals – Plastics and much more! • EZCAD 3 (genuine 64-bit card) with up to 4 axes • Suitable for Windows Professional 64-bit • Professional JPT MOPA fiber laser source with 20 watts output and up to 600 kHz (optional with variable pulse width and up to 2000 kHz for color annealing engraving) • “DigiScan Eco 10” scanner unit for maximum detail and precision • T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece • Large viewing window with certified glass → door opening 380 mm • Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) • Manual height adjustment with focus finder • Enclosure with manual door for easy and safe marking • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel file, network, or database! • Laser parameter finder using a matrix across 2 parameters (e.g., frequency to speed, frequency to power) • TCP IP connectivity. Various commands can now be transmitted to the software using the TCP protocol. This allows easy integration of external components such as camera position recognition. • Industry 4.0 – with TCP/IP protocol, the system state can be processed at any time • Inputs and outputs for automation • New look and feel. A fresh design for even clearer and more comfortable operation • 3D preview for rotary axis processing • Up to 50% performance boost using 64-bit technology • Enhanced stability • Optionally control up to 4 axes WITHOUT switching via plugins • Optional DEEP engraving (slicer software with Z axis control) • Increased engraving speed for hatching thanks to new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus check • LED illumination of the marking area for optimal lighting • Connectable to an external exhaust system • Start button and emergency stop (EMERGENCY STOP) on the enclosure • Software suitable for Windows 10 • USB cable for connecting to the computer • Operating manual and user software in German Among the optional extras we offer: • Intel i3 or i5, 8GB RAM, and ultra-fast M2 SSD • 23" TFT monitor for fatigue-free working → Base with castors and space for PC and exhaust → IPG or SPI fiber laser sources in various power ratings → Motorized and automatic height adjustment → Scanlab equipment → Suitable extraction units → Automation for loading, conveyors, and much more! Lsdpfx Ajfz D Ezjl Ishn → 3D marking and engraving functionality → Automatic focus adjustment via special laser sensor → Rotary units in various versions → Motorized X and Y axes → Interlock system for marking without protective housing, using only PPE (personal protective equipment) for bulky components Including training at our Schweinfurt training center! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore, custom requests are always possible! → Made in Schweinfurt! Pictures may include optional equipment! We are your partner for laser engraving machines and laser markers. Whether manual or automated marking systems, we are happy to provide you with a tailored offer.

Ražošanas gads: 2000, stāvoklis: lietots, Tank- & Environmental Protection Wozniack Certified Specialist Company according to the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a 30,000-litre storage tank for the storage of water and wastewater as follows. This is a 30 cbm storage tank made of steel (material: S235JRG2 steel) including manufacturer’s certificate (DIN) and nameplate. The tank has been cleaned inside and bitumen-insulated on the outside. It is suitable for both underground and above-ground storage. Tank dimensions: Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight: approx. 14,000 kg Shape: cylindrical Equipment: on request For use as a firefighting water tank, we can also provide a suction line with A-type coupling according to DIN standards. Of course, you can also participate in the custom configuration of your tank system! All our systems are thoroughly checked and inspected by selected employees in our company. Affordable delivery is available upon request. Inspection of our tanks at any time is possible. We always have a range of other tanks for above-ground and underground storage in various sizes available for sale at our facility. Have we convinced you of our offer? If you have any questions or special requirements, simply give us a call. One of our experienced staff members will be happy to advise you. In general: All offers are ex location Warstein, loaded free onto truck. Delivery can be offered at additional cost and at favourable rates. Lead time: immediate You will receive an invoice with VAT shown separately. Additionally, we purchase existing tank installations and, as an authorised specialist company under the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove your tanks. Kind regards from Warstein Tank- und Umweltschutz Wozniack Lhodpfx Aloc Nkzns Ien Enkerbruch 2 59581 Warstein

Stāvoklis: jauns, Ražošanas gads: 2025, PREMIUM ECO - Model 2025 - The Marking Champion Among Laser Engravers! Metals – Plastics and much more! • EZCAD 3 (genuine 64-bit card) with up to 4 axes • Suitable for Windows Professional 64-bit • Professional JPT MOPA fiber laser source with 20 watts output and up to 600 kHz (optional with variable pulse width and up to 2000 kHz for color annealing engraving) • “DigiScan Eco 10” scanner unit for maximum detail and precision • T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece • Large viewing window with certified glass → door opening 380 mm • Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) • Manual height adjustment with focus finder • Enclosure with manual door for easy and safe marking • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel file, network, or database! • Laser parameter finder using a matrix across 2 parameters (e.g., frequency to speed, frequency to power) • TCP IP connectivity. Various commands can now be transmitted to the software using the TCP protocol. This allows easy integration of external components such as camera position recognition. • Industry 4.0 – with TCP/IP protocol, the system state can be processed at any time • Inputs and outputs for automation • New look and feel. A fresh design for even clearer and more comfortable operation • 3D preview for rotary axis processing • Up to 50% performance boost using 64-bit technology • Enhanced stability • Optionally control up to 4 axes WITHOUT switching via plugins • Optional DEEP engraving (slicer software with Z axis control) • Increased engraving speed for hatching thanks to new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus check Lsdpfsfdr Thex Al Iohn • LED illumination of the marking area for optimal lighting • Connectable to an external exhaust system • Start button and emergency stop (EMERGENCY STOP) on the enclosure • Software suitable for Windows 10 • USB cable for connecting to the computer • Operating manual and user software in German Among the optional extras we offer: • Intel i3 or i5, 8GB RAM, and ultra-fast M2 SSD • 23" TFT monitor for fatigue-free working → Base with castors and space for PC and exhaust → IPG or SPI fiber laser sources in various power ratings → Motorized and automatic height adjustment → Scanlab equipment → Suitable extraction units → Automation for loading, conveyors, and much more! → 3D marking and engraving functionality → Automatic focus adjustment via special laser sensor → Rotary units in various versions → Motorized X and Y axes → Interlock system for marking without protective housing, using only PPE (personal protective equipment) for bulky components Including training at our Schweinfurt training center! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore, custom requests are always possible! → Made in Schweinfurt! Pictures may include optional equipment! We are your partner for laser engraving machines and laser markers. Whether manual or automated marking systems, we are happy to provide you with a tailored offer.