Thies 4.3350.10.000 iegādāties lietotu (459)

Stāvoklis: lietots, Ražošanas gads: 2021, kopējais augstums: 1 800 mm, kopējais garums: 1 200 mm, kopējais platums: 1 000 mm, kopējais svars: 150 kg, šļūtenes garums: 10 000 mm, nepieciešamais augstums: 1 800 mm, telpas prasība garums: 1 200 mm, nepieciešamais platums: 1 000 mm, transporta garums: 1 200 mm, transporta platums: 1 000 mm, transportēšanas augstums: 1 800 mm, tvertnes tilpums: 50 l, Nr. 04521 ESTA ZA 50 Cyclone Pre-Separator Unused, year of manufacture 2021, in mint condition Filter relief for very large dust quantities The stationary cyclone pre-separators are installed upstream of the main filter unit and serve to pre-separate dry, free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% for a medium grain size of at least 150 microns. Cyclone diameter (top): 282 mm Ledjx Upqhspfx Al Ioru Cyclone height: 1458 mm Dust container: 50 litres Connection pipe diameter (top): 50 mm Connection pipe diameter (at container): 82 mm Includes approx. 10 m extraction hose, diameter 50 mm Transport dimensions approx.: 1200 x 1000 x 1800 mm (LxWxH) Weight approx.: 150 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, no guarantee Subject to prior sale For used machines, any warranty is excluded. The following applies: “purchased as seen” Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex stock

Ražošanas gads: 2020, stāvoklis: lietots, Nr. 3233 Wema Probst QBV 200 Cross Drilling Machine Used, Year of manufacture: 2020 The machine is in like-new condition, with fewer than 30 drillings performed. For making cross-millings and drillings in round-milled or profiled timbers. With this machine, positive-locking joints can be produced in round timber with three-dimensional manual adjustment. Typical applications include corner joints for log houses, timber frame constructions, or garden timber products such as fences, carports, planters, raised beds, guardrails, etc. The cross drilling machine consists of a base frame in steel welded construction with a swiveling drilling unit, gas spring-assisted drill column, and an adjustment for the drill column position. Wood is clamped using two centering vices. Asymmetrical or end-face machining is possible with the special tool (circular saw blade). The machine also allows for drilling 90° holes up to a max. diameter of 120 mm in timber using flat drill bits. Accessories: Collet chuck with 25 mm diameter for tool holding, without tools. Wood diameter: 60 – 200 mm Tool adjustment range: +/- 60° for 60 mm diameter / +/- 45° for 80 – 140 mm diameter / +/- 30° for 160 – 200 mm diameter Motor power: 2.2 kW Speed: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm (LxWxH) Weight approx. 380 kg Sale on behalf of customer, ex location near 46026 Valencia (Spain), without dismantling, transport or installation Dismantling, loading, and transport can be arranged by us as an option Errors in description and price excepted To avoid potential misunderstandings, viewing by appointment on site is possible and recommended Sale as is Technical data, condition, year of manufacture and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale With used machines, all warranties are excluded; goods are sold "as inspected." Pictures and videos are for illustration purposes only and may not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Lsdpswt Abwofx Al Ieru Delivery terms: ex location

Stāvoklis: teju kā jauns (lietots), Ražošanas gads: 2025, Funkcionalitāte: pilnībā funkcionāls, jauda: 7,5 kW (10,20 zs), rīka diametrs: 125 mm, asmens skaits: 4, rotācijas ātrums (maks.): 5 000 apgr./min, kopējais svars: 1 100 kg, *Demonstrācijas iekārta, pieejama ātrai piegādei* TEHNISKIE DATI Plānošanas platums: 630 mm Plānošanas augstums: 3–300 mm Noņemamais slānis, maks.: 8 mm Biezumgalda garums: 1100 mm Nažu vārpstas apgriezienu skaits: 5000 apgr./min Piedziņas motora jauda: 0,55 kW / 0,8 ZS / 0,75 kW / 1,0 ZS Atvilkšanas stūra diametrs: Ø 160 mm, kreisajā vai labajā pusē Padeves ātrums: 7 + 14 m/min Krāsa: RAL 7035 gaiši pelēka un RAL 5000 violeti zila Svars neto: apm. 1050 kg Ledpfxsfgwqae Al Ijru TEHNISKAIS APRAKSTS Izturīga vācu ražojuma mašīnbūve Biezumu ēvelēšanai ar ēvelēšanas platumu līdz 630 mm un augstumu no 3 līdz 300 mm, kompakts un ergonomisks dizains Rūpnīcā noregulēta precizitāte PANHANS pilna tērauda nažu vārpsta, Ø 125 mm, ar 4 Tersa maināmiem nažiem Šūpojoši uzstādīti padeves veltņi Segmentēti gumijas ieejas un izvelkšanas veltņi, Ø 90 mm, nodrošina maigu un drošu sagataves padevi Ar posmu spiediena joslu Elektriskā biezumgalda augstuma regulācija, droša pret apgāšanos uz 4 trapecveida vītņu skrūvēm Ar smalki apstrādātu biezumgaldu Pozicionēšanas vadība ar 4,3" skārienekrānu Divi padeves ātrumi: 7 + 14 m/min Automātiska zvaigznes-trijstūra palaišana Mehāniska motora bremze Atvilkšanas stūris Ø 160 mm, lietojams abās pusēs (kreisajā vai labajā) Atbilst CE prasībām GS sertificēta

Stāvoklis: jauns, Ražošanas gads: 2025, iekārtas/transportlīdzekļa numurs: 997307957, Gasparin Jaw Crusher GI118C OLIMPO Mobile jaw crusher on crawler tracks The OLIMPO delivers impressive power thanks to its 1100x800 crusher, making it the ideal machine for professionals in quarrying and recycling applications. This is a no-compromise machine, designed with a focus on application requirements, productivity, ease of maintenance, and transportability. Equipped with state-of-the-art control and operating systems, it is user-friendly, intuitive to operate, and environmentally friendly at the same time. Lrodshd Nabspfx Al Iju The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, ensuring maximum cost-efficiency in terms of maintenance and productivity, making it truly unrivaled. Structural reinforcements between the frame and the crusher provide the machine with outstanding durability under stress. The unique design of the supporting structure ensures excellent access to all machine components during maintenance. The OLIMPO crusher delivers convincing and unmatched performance, whether used for natural stone, recycling, or rental applications. Production capacity: approx. 330 t/h Patented HCS system Proportional distributor with "Load Sensing" for optimized system efficiency and up to 30% fuel saving Optional pre-screen available Hydraulically adjustable crusher gap, also during crushing operation Rapid wedge and hydraulic folding cylinder locking system Discharge height: 3200 mm Dust extraction Fuel transfer pump Magnetic separator Warranty: 1 year or up to maximum operating hours from initial start-up Technical data: Jaw crusher: 1100 x 800 mm Crusher gap: 50 to 200 mm Feed hopper: 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Grizzly feeder: 970 x 3600 mm Main conveyor: 1000 x 11,000 mm 4-cylinder diesel engine, constant speed, 82 HP / 60 kW, emission standard Stage V Control panel Crawler tracks: 450 x 3800 mm Weight: kg Transport length: 13,850 mm Transport width: 2,550 mm Transport height: 3,390 mm Additional information: Application: Construction Overall condition: very good Technical condition: very good Visual condition: very good

Stāvoklis: jauns, TC 165 x 750V The illustration shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2000 rpm Mechanical speed ranges: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Cross feeds X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral pitch threads: (32) 7.5 - 112 DP Lrjdpsir Igwefx Al Isu Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance protocol according to DIN - Precision, hardened and ground guides - Robust headstock with oil-circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant machine beds made from high-quality MEEHANITE cast iron, stress-relieved and heavily ribbed for maximum smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse switch for main spindle - CE/IEC and German documentation and service Standard equipment (included accessories): - Machine stand with splash guard rear wall - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical braking system - Coolant system - Chuck guard and spindle cover in compliance with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 inspection protocol - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle - Operating tools Available options for this lathe: - 3-axis digital readout - Multifix quick-change tool post system Also available as a geared head variant

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 2015, REFORM M14 Hydrostatic Tool Carrier with R2 Rotary Harrow Technical Data: ENGINE: 4-stroke petrol engine: 21 HP Briggs & Stratton, 2-cylinder, 4-stroke petrol engine DRIVE: Hydrostatic, stepless drive system; driving direction and speed are electrohydraulically adjustable via a rocker switch on the handlebar with integrated, infinitely variable fine feed control. SPEED: Forward 0 - 9.0 km/h, Reverse 0 - 4.0 km/h AXLE: Continuously length-adjustable (120 mm) for centre of gravity adaptation or implement load relief STEERING: Precisely controllable hydraulic steering, operated via two steering levers (left and right on the handlebar). Hydraulic differential lock function during straight-line travel. IMPLEMENT ATTACHMENT: Self-centering quick-hitch system PTO: Front PTO independent of traction drive, 874 rpm at 3400 rpm engine speed, clockwise rotation Ledpfsizi Naex Al Isru FEATURES: Elastically mounted, height- and side-adjustable handlebar, emergency stop lever on the left handlebar grip WEIGHT: 220 kg Tires: 23x8.50-12AS Terra low-pressure wide tires Attachment: - R2 MTL-100 Rotary Harrow (unused) This REFORM M14 is in very well-maintained overall condition, just serviced, and ready for immediate use! - Price is subject to an additional 19% VAT. - On-site inspection / test drive welcome - Shipping via freight forwarder: €220 - Financing / leasing can be individually arranged for you!

Stāvoklis: jauns, Ražošanas gads: 2023, Svars 950 kg Lsdpfx Alsmdr A Eo Ioru Spriegums 3 x 400 V Motora jauda (S6) 9,2 kW / 12 ZS Putekļu nosūkšanas pieslēgums 160 mm Nažu bloka diametrs 120 mm Nažu skaits 4 Nažu izmēri 630 x 30 x 3 mm Maksimālais griešanas dziļums 8 mm Platums 630 mm Biezumplānera kapacitātes augstums 3–300 mm Biezumplānera galda izmēri 1160 x 630 mm Regulējams padeves ātrums 5–22 m/min Ievilkšanas veltņu diametrs 70 mm iekļ. TERSA nažu vārpsta Attēlā redzes papildaprīkojums

Stāvoklis: jauns, Ražošanas gads: 2025, Tehniskie dati: noderīgais darba platums 520 mm kopējais galda garums 2310 mm Naža vārpstas diametrs 120 mm Virsmas vārpstas apgriezienu skaits 5000 apgr./min 4 naži 35x3x520 mm Lrjdpfx Aon Sm Tijl Isu Alumīnija virsmas žogs 1200x190 mm Virsmu žoga slīpuma regulēšana no 90° līdz 45° min./maks. frēzēšanas augstums 3 / 250 mm Biezuma padeves ātrums 5-8-12-18 m/min. Nosūkšanas pārsega diametrs (virsma) 120 mm Nosūkšanas pārsega diametrs (biezums) 120 mm Standarta aprīkojums: - Darba galda regulēšana ieejā ar paralelogramu sistēmu, skaidu noņemšanas indikators ar grāda skalu. - Vienlaikus abu galdu augstuma regulēšana un fiksācija, aprīkota ar pretnoliešanas ierīci. - Ātrās pārbūves sistēma pārejai no virsmas uz biezuma apstrādi (CE versija) ar īpašu atbalstu galda atvēršanai un automātisku pneimatisko nosūkšanas pārsega pozicionēšanas sistēmu ar hidraulisko atbalstu. - "READY" elektroniskā vadība ietver: – Biezuma galda regulāciju – Manuālu, daļēji automātisku un automātisku režīmu ar 99 saglabājamām darba programmām – Papildu funkcijas: kalkulators un darba stundu skaitītājs - Mašīnas galds ar augstuma regulāciju, izmantojot 4 tērauda vītņstieņus - Izvades gumijas padeves veltnis - Maināmi padeves veltņi - Ķēdes tipa spiediena kurpes ieejā - Virsmas vārpsta un regulēšanas lineāls nažiem ieskaitot šādu papildu aprīkojumu: "TERSA" naža vārpsta ar vienreiz lietojamiem apgriežamiem nažiem, pagriežams palīgžogs

Stāvoklis: jauns, Ražošanas gads: 2022, Darbības platums: 630 mm Lrodpfx Aljl D Rxfo Ieu Maksimālais ēvelēšanas augstums: 300 mm Ēveles vārpsta: Tersa Nažu skaits: 4 Augstuma regulācija: elektriska Ēvelēšanas biezuma indikators: digitālais displejs Barošanas ātrums: bezpakāpju, 5 - 22 m/min Ievelkšanas veltnis: tērauda Spiediena balsts: segmentēts Izvades veltnis: gumijas, 2 x Galda veltņi: nav Dzinēja jauda: 9,2 kW Putekļu nosūkšanas pieslēgums: 160 mm Iekārtas garums: 1200 mm Iekārtas platums: 1200 mm Svars: 1000 kg

Stāvoklis: jauns, - Maksimāla komplektācija profesionāļiem ar Tersa nažu vārpstu. - Ideāli piemērota prasīgiem amatniekiem un galdniekiem. - Īpaši gari izlīdzināšanas galdi nodrošina vieglu materiāla apstrādi. - Darba galdi izgatavoti no pelēkā čuguna – izturīgi pret nodilumu un ilgstoši saglabā plakni. - Aizmugurē vienlaikus atverami izlīdzināšanas galdi nodrošina īsu pārregulēšanas laiku. - Slīpi zobaina tērauda padeves vārpsta nodrošina nemainīgu un vienmērīgu koksnes padevi. - Gumijas izvelkošā vārpsta biezumrūpēšanas izplūdē nodrošina vienmērīgu izvilkšanu. - Materiāla padeve ar četrām ātruma opcijām. - Biezumgalda regulēšana ar rokas ratu un digitālo augstuma indikatoru. - TERSA nažu sistēma ļauj mainīt nažus sekundes laikā un nodrošina ļoti klusus darba apstākļus. - Lielais izlīdzināšanas lineāls (1200 mm x 150 mm) paliek vietā, kad galdi tiek atvērti. - Ievērojams iekārtas svars nodrošina augstāko precizitāti un vienmērīgu darbību. - Sagatavots izvelkamās urbumu iekārtas uzstādīšanai. Digitālais modelis ar elektrisku biezumgalda augstuma regulēšanu. Tehniskie dati: Galdu kopējais garums: 2250 mm Darba platums: 520 mm Maks. slāņa noņemšana: 5 mm ---Tehniskie dati: Biezumgalda funkcija--- Biezumgalda izmēri: 520 x 850 mm Min./maks. darba augstums: 3 / 240 mm Minimālais darba garums: 220 mm Padeves ātrumi: 5/8/12/18 m/min Nažu vārpstas diametrs/nažu skaits: 120 mm / 4 gab. - Ideāli prasīgiem amatniekiem un galdniekiem. - Īpaši gari, no viena gabala izlīdzināšanas galdi nodrošina vieglu apstrādi. - Čuguna darba galdi – izturīgi un pastāvīgi plakani. - Aizmugurē sinhroni atverami izlīdzināšanas galdi ar atsperes atbalstu – ātrai un ērtai pārregulēšanai. - Pateicoties fiksētajam nosūcēja vāciņam, pārejas laikā nav jāmaina nosūces šļūtene – tiek taupīts laiks. - Slīpi zobaina tērauda padeves vārpsta nodrošina nemainīgu materiāla padevi. Lodpfx Alsvwd U Io Ijru - Gumijas izvelkošā vārpsta izejā nodrošina izlīdzinātu izvilkšanu. - Četri padeves ātrumi. - Biezumgalda regulācija ar rokas ratu un integrētu augstuma indikatoru. - DIGITAL izpildījums: elektriska augstuma regulācija ar digitālu displeju. - Start/stop slēdzis pie operatora pozīcijas. - Jaudīgs rūpnieciskais motors. - Ievērojams iekārtas svars – maksimāla precizitāte un klusa darbība. - Sagatavota izvelkamās urbumu iekārtas uzstādīšanai. Tehniskie dati Izmēri un svars Produkta garums: apm. 2250 mm Platums/dziļums: apm. 1370 mm Neto svars: apm. 695 kg Izlīdzinātājs Galdu kopējais garums: 2250 mm Maks. slāņa noņemšana: 5 mm Lineāla garums: 1200 mm Lineāla augstums: 150 mm Nosūces pieslēgums Pieslēguma diametrs: 1 x 120 mm Uzstādīšanas informācija Nepieciešamā vieta garums: 2250 mm Nepieciešamā vieta platums/dziļums: 1440 mm Paskaidrojums: Izmēri ņem vērā maksimālos kustības ceļus vai lietojamos garumus. Biezumrūpēšanas funkcija Biezumgalda garums: 850 mm Biezumgalda platums: 520 mm Minimālais darba augstums: 3 mm Maksimālais darba augstums: 240 mm Minimālais darba garums: 220 mm Maksimālā noņemšana: 5 mm Elektriskie dati Dzinēja jauda: 7 kW Pievades spriegums: 400 V Tīkla frekvence: 50 Hz Nažu vārpsta Nažu vārpstas tips: TERSA Nažu vārpstas diametrs: 120 mm Nažu skaits: 4 gab. Nažu vārpstas apgriezieni: 5000 min¯¹ Maks. apstrādes platums: 520 mm

Stāvoklis: jauns, Ideāli piemērots prasīgiem meistariem un galdniekiem. Īpaši garie virsmas frēzēšanas galdi, izgatavoti no viena gabala, ļauj viegli apstrādāt sagataves. Darba galdi ir no pelēkā čuguna – noturīgi pret ietekmi un ilgstoši saglabā plakumu. Aplīdzināšanas galdi atveras vienlaicīgi uz aizmuguri, atbalstīti ar atsperi ātrai un ērtai pārbūvei. Fiksēta nosūces pārsega dēļ pārbūves laikā nav jāmaina nosūces šļūtene, kas ietaupa vērtīgu darba laiku. Slīpi zobota tērauda padeves veltņa nodrošina vienmērīgu un nepārtrauktu koksnes padevi. Gumijas izlādes veltnis nodrošina vienmērīgu sagataves izvadīšanu biezinātājā. Materiāla padeve ar četrām ātruma pakāpēm. Biezinātāja galds regulējams ar rokturi un integrētu attēlojumu uzstādītajam biezumam. DIGITAL versija: ar elektriski regulējamu biezinātāja galda augstumu un digitālo displeju. Ieslēgšanas/izslēgšanas slēdzis operatora pozīcijā. Jaudīgs rūpniecības motors. Liels iekārtas svars nodrošina maksimālu precizitāti un klusu gaitu. Sagatavota garenurbuma izveidošanai. Kvalitāte – ražots Itālijā. TEHNISKIE DATI Izmēri un svars: Garums (produkts): aptuveni 2250 mm Platums/dziļums (produkts): aptuveni 1370 mm Svars (neto): aptuveni 695 kg Frēzēšana: Galdu kopējais garums: 2250 mm Maksimālā frēzes noņemšana: 5 mm Frēzes žoga garums: 1200 mm Frēzes žoga augstums: 150 mm Nosūkšanas pieslēgums: Izvades pieslēgums biezinātājam: 1 × 120 mm Uzstādīšanas informācija: Nepieciešamais garums: 2250 mm Nepieciešamais platums/dziļums: 1440 mm Paskaidrojums: Izmēros iekļauti maksimālie darba ceļi/noderīgais garums. Biezinātājs: Lrodpfjvwflbex Al Isu Biezinātāja galda garums: 520 mm Biezinātāja galda platums: 850 mm Minimālais darba augstums: 3 mm Maksimālais darba augstums: 240 mm Minimālais darba garums: 220 mm Maksimālā noņemšana biezinātājā: 5 mm Elektriskie dati: Dzinēja jauda: 7 kW Pieslēguma spriegums: 400 V Tīkla frekvence: 50 Hz Nažu vārpsta: TERSAs tipa nažu vārpsta Nažu vārpstas diametrs: 120 mm Nažu skaits: 4 gab. Nažu vārpstas apgriezieni: 5000 apgr./min Maksimālais frēzes platums: 520 mm Padeve: Padeves ātrumi: 5/8/12/18 m/min PIEGĀDES KOMPLEKTĀ: Uzstādāms frēzes žogs ar apaļo stieni vadību 4 padeves ātrumi Tersa nažu vārpsta Ražotāja Nr. 5503501

Stāvoklis: ļoti labs (lietots), Funkcionalitāte: pilnībā funkcionāls, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose, DIN 4 >> Tailstock Taper: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread Cutting Options: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 2.5 mm >> Switchable Spindle Brake >> Weight: approx. 360 kg >> Dimensions: 1.2 m (L), 1.3 m (H), 0.65 m (D) Accessories and Equipment: Lredsvivmyepfx Al Isu >> 1 piece 3-jaw chuck, NEW, 125 mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> Collet setting, NEW, with collets from 3 to 26 mm, increments of 1 mm, NEW About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. Naturally, the machine is fully functional. All slides operate smoothly and evenly. The bedways are in very good condition. The Primus was previously used in a training workshop. This newer generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stāvoklis: jauns, Jaunā Holzprofi biezumplānošanas iekārta A800 galdniecībām un rūpniecībai. Standarta komplektācija: + Elektriska biezumgalda pacelšana ar 2 ātrumiem un digitālu augstuma iestatīšanu + Īpaši garš, slīpēts biezumgalds + Četru nažu vārpsta + Automātiska zvaigznes-trijstūra palaišana + Pakāpeniski maināms padeves ātrums ar digitālu displeju + 1. padeves vārpsta – rievota + 2. un 3. padeves vārpsta – tērauda + Dalīti ieejas un izejas spiediena balsti + Četru punktu galda stiprinājums + Speciāli trokšņu slāpēšanas pasākumi + Nažu regulēšanas šablons Ledpsvrvfhsfx Al Ioru + Atbilst CE prasībām Tehniskie dati: Plānošanas vārpstas garums: 820 mm Padeves ātrums: 4 līdz 19 m/min Vārpstas diametrs: 150 mm Maksimālais skaidas noņemšanas daudzums: 7 mm Biezumgalda garums: 1200 mm Galvenā motora jauda: 13,5 kW S6 (11 kW pie 100% slodzes) Padeves motora jauda: 1,5 kW Maksimālais darba augstums: 300 mm Vārpstas apgriezieni: 4600 apgr./min Hobļa naži: 4 gab. Nosūkšanas pieslēgums: 150 mm Svars: 1380 kg Pieejamas papildus opcijas pēc pieprasījuma: - 18 kW dzinējs - Gumijotas padeves vārpstas - Segmentētā ievelkošā vārpsta - Zemgalda veltņi - Frēzēšanas agregāts ar griežnas plāksnēm - Tersa vārpsta - Ieejas un izejas galda veltņi

Stāvoklis: teju kā jauns (izstādes iekārta), Demonstrācijas modelis Dickeņu izlīdzināšanas iekārta Holzprofi DMS53 izceļas ar savu stabilo konstrukciju, masīvo čuguna darba galdu ar slīpētu virsmu un modernu lietošanu. Elektriskā galdvirsmas augstuma regulācija ar displeju Iekļautas 2 regulējamas apakšējās veltņu vienības CE atbilstība, ražots ES! Tehniskie dati: Galda izmērs: 530 x 950 mm Maksimālā noņemamā šķēluma biezums: 8 mm Apstrādājamā materiāla biezums: 3 - 300 mm Padeves ātrums: 8 / 16 m/min Naža vārpstas diametrs: 125 mm Naža vārpstas apgriezieni: 5000 apgr./min Nažu skaits: 4 gab. Nažu izmēri: 530 x 35 x 3 mm Motora nominālā jauda: 7,5 kW – S6 (5,5 kW S1) Padeves motora jauda: 1,1 / 1,5 kW S1 Dūmu nosūces pieslēguma diametrs: 160 mm Svars: 680 kg Lrodovrvm Sjpfx Al Isu Ilustratīvs attēls

Stāvoklis: gatavs lietošanai (lietots), Deckel SOE Cutter Grinder Maximum Collet Bore: 17.5 mm Maximum Grinding Length: 90 mm Maximum Grindable Angle: 180° Maximum Grindable Radius: 10 mm Coarse Table Travel: 100 mm Fine Adjustment: 15 mm Swiveling Range of Dividing Head Carrier: 90° Coarse Adjustment of Dividing Head Slide: 40 mm Fine Adjustment of Dividing Head Slide: 12 mm Lrjdpfxsv T T Ivo Al Isu Height from Tube Guide Center to Grinding Spindle Center: 140 mm Wheel Size: 100 x 50 x 20 mm Accessories: Optics Collets You are welcome to arrange a viewing. A proper invoice will be provided. For foreign customers, a net invoice can also be issued. This requires a valid VAT identification number. Subject to prior sale. If you have any questions, please feel free to contact us by phone. Our telephone number is listed at the bottom of the item page under Legal Information / Seller’s Imprint. Visit our shop and check out our other offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. The installation and electrical connection of the machine/equipment must be carried out or inspected by a qualified professional. Deviations from technical data and errors in the item description may occur and are subject to change. Shipping is only available to commercial customers—private buyers can only collect the machine in person.

Stāvoklis: darbnicā atjaunots (lietots), Ražošanas gads: 1985, Funkcionalitāte: pilnībā funkcionāls, Pievienojuma jauda 380V Galvenā asmeņu motora jauda 4kW, 8,3A Ievelkšanas motors 1x0,37kW un 1x0,55kW 2 padeves ātrumi: 7 un 14 m/min Zvaigznes-trijstūra slēdzis Skobes augstums regulējams ar rokturi Skobes platums 510 mm Ljdpfjv Up R Aox Al Ijru Leitz reversējamo nažu vārpsta ar 2 asmeņiem 2 darba galda veltņi Aspirācijas pieslēgums 140 mm

Stāvoklis: jauns, Ražošanas gads: 2024, SCHORR Electric High-Lift Pallet Truck 1,500 kg Lifting Capacity - Various lift height options available (2,500 mm, 3,000 mm & 3,500 mm) - Low-maintenance and smooth operation Lrodottgg Ajpfx Al Ieu - Includes 24V batteries and charging unit - 1.5 t lifting capacity - NEW & In Stock! Prices by lift height / variant: - 2,500 mm lift height: €3,613 - 3,000 mm lift height: €3,781 - 3,500 mm lift height: €3,949 SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK 1,500 KG WITH LIFT HEIGHT FROM 2,500 TO 3,500 MM The SCHORR electric high-lift pallet truck gives you the capability to transport heavy loads up to 1,500 kg. Depending on the chosen model variant, it achieves a lift height between 2,500 and 3,500 mm. The fork length is 1,150 mm, making it ideal for both disposable and Euro pallets. A major advantage is its compact mast height when retracted—just 1,745 mm (2,500 mm variant)—allowing it to fit through standard doorways. This model is distinguished by its robust construction, and also features an integrated steel safety guard. Charging is made easy with the built-in charger. Simply connect the stacker to any standard 230V socket for operation. The high-lift truck is equipped with a premium CURTIS control system. Operator instruments such as the battery indicator, emergency stop, and key switch are centrally located and always within direct view. The SCHORR pallet stacker also offers different driving modes, including a slow “creep” (turtle) mode for precise maneuvering. POWERFUL IN EVERY RESPECT The RR15HH electric pallet stacker easily handles most warehouse tasks with a lifting capacity up to 1.5 tonnes. Its robust steel frame not only ensures impact protection, but also delivers excellent maneuverability thanks to a compact design. INTEGRATED CHARGER The stacker comes with two maintenance-free 12V gel batteries (100 Ah each) and a built-in charger. Just plug into a standard 230V outlet for easy charging. INTUITIVE CONTROL The dual-handed operating handle is extremely user-friendly. Tried-and-tested components guarantee high ergonomics and operator comfort. Travel speed is infinitely variable, and with the selectable creep mode, even delicate goods can be handled with ease. Technical Data Manufacturer (abbreviation): SCHORR Model code: RR15HHE Rated capacity: 1.5 t Model: 250E // 300E // 350E Net weight incl. battery: 483 kg // 495 kg // 507 kg Drive: Electric Tyres: Polyurethane Key Dimensions Overall length: 1,740 mm Overall width: 795 mm Length incl. fork back: 590 mm Lift height: 2,500 mm // 3,000 mm // 3,500 mm Mast height (retracted): 1,745 mm // 1,995 mm // 2,245 mm Mast height (extended): 2,924 mm // 3,424 mm // 3,924 mm Fork dimensions to DIN ISO 2331: 60 mm x 160 mm x 1,150 mm Fork outside width: 570 mm Working aisle width, pallet 800x1200 lengthwise: 2,040 mm Turning radius: 1,342 mm Speeds Travel speed laden/unladen: 4.0 km/h / 4.2 km/h Lifting speed laden/unladen: 0.09 m/s / 0.14 m/s Lowering speed laden/unladen: 0.11 m/s / 0.1 m/s Max. gradeability laden/unladen: 6% / 8% The SCHORR team is happy to assist you with any questions about our pallet stackers. Reach our expert team by phone or email—we look forward to hearing from you and assisting with your requirements.

Stāvoklis: jauns, Ražošanas gads: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The high-performance Weima shredders, with their flexible application options, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips while providing a significant volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper and can be loaded either via conveyor belt or manually. This hopper can be customized to individual requirements and ensures continuous, cost-effective material infeed without requiring manual intervention. Technical Specifications WL 6 / 18.5 kW: - Hopper opening: 800 x 1,000 mm - Hopper volume: 0.9 m³ - Working width of rotor: 800 mm - Rotor diameter: 252 mm - Drive power: 18.5 kW - Rotor speed: 80 - 120 rpm - Number of knives: 42 pcs - Knife type and size: concave / 40 x 40 mm, reversible cutting crowns - Screen perforation: 10-60 mm possible (standard 15-20 mm) - Paint: WEIMA standard RAL 2002 / 7016 - Electrical connection: 400 V +/- 5% / 50 Hz - Weight: approx. 1,600 kg Includes: - Control cabinet (Rittal) incl. electrical controls (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with profile-milled knife pockets - Gear limit switch Lrsdpeh Eiw Iofx Al Iou - Pressure bar - Highly robust Weima WAP gearbox - Logspacer (free-cutting hopper) - Second knife row Available from stock in 54634 Bitburg - Immediately available - Request more information

Stāvoklis: gatavs lietošanai (lietots), Ražošanas gads: 1984, Funkcionalitāte: pilnībā funkcionāls, asmens skaits: 4, kopējais svars: 1 100 kg, darba platums: 600 mm, TEHNISKIE RAKSTURLĀKAS Darba platums: 600 mm Augstums: 200 mm Virpošanas galda garums: 2100 mm Virpošanas nažu skaits: 4 gab. Lrsdpfxozkt Iae Al Iou Padeves ātrums: 7 + 14 m/min IERĪCES RAKSTURLĀKAS Ierīces svars: 1100 kg APRĪKOJUMS Aigner palīglīnija virpošanas galda līnijā Ierīces statīvs, izgatavots no lietā metāla Biezuma galda četrvirzienu vadība Rokturas regulēšana Aizsargierīce

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 2007, DMG DMC 1035 V Machining Center DMG DMC 1035 V with Heidenhain iTNC 530 control, year of manufacture 2007, in excellent original condition. The machine comes from the toolmaking department of a renowned German engineering company. CE compliant!! Technical Specifications: Year of manufacture: 2007 Technical Details X-axis travel: 1,035 mm Y-axis travel: 560 mm Z-axis travel: 510 mm Control system: Heidenhain iTNC 530 Main spindle: Speed range – main spindle: 20 – 8,000 rpm Drive power – main spindle: 13 / 9 kW Tool holder: BT 40 Pull stud: ISO 7388-3-A AD40 Worktable: Clamping surface: 1,200 x 560 mm Max. table load: 1,000 kg Table height above floor: 720 mm T-slots: 5 x 14 x 100 Tool changer: Number of tool stations: 20 positions Max. tool diameter: 80 mm Max. tool diameter with free adjacent slot: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Ljdpfx Aexqgrxel Ieru Tool change time: 1.6 sec Chip-to-chip time: 7.0 sec Rapid traverse / Feeds: Feed rate: 24,000 mm/min Rapid traverse: 30 m/min Total power requirement: 20 kVA Machine weight approx.: 4.5 t Space requirement approx.: 4.0 x 4.0 x 2.5 m About the machine: Offered is a DMG DMC 1035 V machining center with a Heidenhain iTNC 530 control. This machining center is in very good original condition. It comes from an operation where it was only used occasionally for training purposes. The control is very user-friendly. The guideways are regularly lubricated by the central lubrication system. The DMG DMC 1035 V has been mechanically and electrically inspected by us. You are welcome to view and test the DMG DMC 1035 V under power at our site. You will find further milling machines from renowned manufacturers on our website.

Stāvoklis: labi (lietots), Ražošanas gads: 1996, Reckermann Kombi 1050 Reckermann Kombi 1050 knee-type milling machine with Heidenhain TNC 124 control, year of manufacture 1996 – in good condition. This machine comes from the training department of a well-known German mechanical engineering company; it was taken out of service because it was too large for standard applications. Technical Data: Knee-type milling machine RECKERMANN Model Kombi 1000 Year of manufacture: 1996 Control: Heidenhain TNC 124 Technical Details: X-axis travel: 1,000 mm Y-axis travel: 350 mm Z-axis travel: 450 mm Spindle center to column distance: 50 – 500 mm Spindle center to table distance: 0 – 450 mm Table height above floor: 850 – 1,300 mm Clamping surface of table: 1,570 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot pitch: 70 mm Max. workpiece weight: 500 kg Tool holder: SK 40 Spindle speed range (milling): 48 – 2,100 rpm Main spindle drive power: 6.1 / 7.4 kW Number of gear steps: 16 Rapid traverse X-axis: 5 m/min Rapid traverse Y-axis: 5 m/min Rapid traverse Z-axis: 2 m/min Lsdpfox N Euxex Al Ioru Feed speed: 10 – 1,000 mm/min Feed force: 22 Nm Total connected load: 400 V Machine weight: approx. 4.0 t Space requirement: approx. 3.3 x 2.2 x 2.2 m Accessories and Equipment: Heidenhain TNC 124 control Hydraulic clamping (vertical and horizontal) Automatic central lubrication Technical documentation, spare parts diagrams, control manual and programming examples Handwheels, coolant system, spindle brake About the machine: For sale is a Reckermann Kombi 1050 knee-type milling machine with Heidenhain TNC 124 control, year 1996. This universal milling machine is in very good original condition. It comes from a facility where it was only occasionally used for training. It features intuitive, easy-to-use controls. The machine is equipped with hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very easy thanks to the pivoting vertical head. The guides are automatically and regularly lubricated by the central lubrication system. The Reckermann has been mechanically and electrically tested by us. You are welcome to inspect and test the machine under power at our location. You can find further milling machines from reputable manufacturers on our website.

Stāvoklis: gatavs lietošanai (lietots), Ražošanas gads: 1998, Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: 09075101981004, ieejas spriegums: 380 V, ievades strāvas veids: trīsfāzu, kopējais garums: 28 000 mm, pēdējās kapitālremonta gads: 2024, vadības spriegums: 380 V, sagataves augstums (maks.): 160 mm, Aprīkojums: divpusējs, A woodworking company in Latvia is offering for sale full Weinig GreCon Combipact finger jointing line. The machine has had only two owners, both well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. The machine is in full working condition and is currently stored in heated premises, ready for its next owner. Machine has been running only in one shift. Machine has option to make furniture finger jointing connection as well. The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability. Lodpjz Armljfx Al Ieru Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All Weinig manufacturer original documentation available. Some spare parts are available as well for this machine. We are also selling a Weinig Dimter Opticut optimization line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email and I will give all technical information or additional images and video can be made.

Stāvoklis: gatavs lietošanai (lietots), Ražošanas gads: 2023, tintes kasetņu skaits: 4, krāsu kanāli: 4, drukas galvu skaits: 4, maksimālais papīra svars: 350 g/m², papīra platums (maks.): 330 mm, papīra augstums (min.): 1 mm, maksimālais papīra augstums: 1 300 mm, barošu paplāšu skaits: 3, skaitītāja rādījums (melns): 111 572, skaitītāja rādījums (krāsa): 296 115, pēdējās kapitālremonta gads: 2026, Aprīkojums: automātiskais duplekss, brošūru pabeigšanas iekārta, dokumentācija / rokasgrāmata, rastra attēlu apstrādātājs, An authorized Canon Production partner is selling Canon imagePress V900 (90ppm) cut-sheet digital press. The printer is in excellent condition, has been on service contract since 2023.02 until this day. Configuration: - CANON ImagePress V900 main unit (90ppm license) - Multi-drawer Paper Deck-E1 - Booklet Finisher AG1 - Duplex Color Image Reader Unit-P1 Lsdszpxy Sspfx Al Ijru - PRISMAsync iPR V900 - Stack Bypass-D1 - Stack Bypass Alignment Tray-D1 - Inline Spectro Counters: Total (All) 535 659 Total (Black/Large) 111 572 Total (Black/Small) 19 160 Total (Full Color+ Single Color/Large) 296 115 Total (Full Color+ Single Color/Small) 108 812 Total (Black & White / Long Sheet 1 250 Total (Full Color + Single Color/Long sheet 2352 It's possible to check the printer at our premises and do test prints. Printer is located in Riga, Latvia. We will pack it for safe shipping worldwide.

Stāvoklis: lietots, Ražošanas gads: 2000, iekārtas/transportlīdzekļa numurs: 11197, Hundegger K2-450 joinery line – Year of manufacture 2000 For sale is a used Hundegger K2-450 joinery machine, year 2000, from ongoing production. Ledpfxozbnkfs Al Isru The machine was used for processing timber components in timber frame and wooden house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The system can be viewed under power by appointment. Technical data: Manufacturer: Hundegger Model: K2-450 Year of manufacture: 2000 Machine no.: 11197 Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: Complete infeed and outfeed system included Machine was in production until recently Sale due to modernization or production restructuring Dismantling and loading by arrangement On-site inspection strongly encouraged This machine is ideally suited for carpentry shops, timber construction companies, and businesses in the joinery sector seeking a proven and robust Hundegger system. For further information, technical details, additional photos, or to arrange a viewing appointment, please do not hesitate to contact us.

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 1995, Funkcionalitāte: pilnībā funkcionāls, Weiler Praktikant 160 AC Precision Centre Lathe 3-axis Digital Readout Weiler with AC drive, stepless spindle speed, CE marking!!!!! Technical Data: >> Year of manufacture: 1995 Machine no. 3820 Lrsdpfx Alsy Ulqwe Iou >> Centre height: 160 mm >> Centre width (distance between centres): 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: Metric, Inch, Module and Diametral-Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight approx.: 1000 kg >> Switchable spindle brake >> Machine dimensions approx.: 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and Equipment: >> 3-axis digital readout by Weiler >> Quick-change collet chuck with collets from 2 to 28 mm, increments of 1 mm >> New 3-jaw chuck 160 mm with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the work spindle, lead and feed shaft covers, brake motor, 2 emergency stop switches, electrical protection switch for the gear housing About the machine: On offer is a Weiler Praktikant AC lead and feed screw lathe, year 1995, in excellent condition. A very fine lathe with AC drive and stepless spindle speed control. The slides all move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The machine features CE marking. It comes from a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. The digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and see its condition for yourself.