Damatomacchine Forum iegādāties lietotu (688)
Kārtot rezultātus
- Zemākā cena Augstākā cena
- Jaunākie sludinājumi Senākie sludinājumi
- Īsākais attālums Maksimālais attālums
- Jaunākais ražošanas gads Vecākais ražošanas gads
- Jaunākais atjauninājums Vecākais atjauninājums
- Ražotāji no A līdz Z Ražotājs no Z līdz A
- Atbilstība
- Zemākā cena
- Cena
- Augstākā cena
- Cena
- Jaunākie sludinājumi
- Publicēšanas datums
- Senākie sludinājumi
- Publicēšanas datums
- Īsākais attālums
- Attālums
- Maksimālais attālums
- Attālums
- Jaunākais ražošanas gads
- Izgatavošanas gads
- Vecākais ražošanas gads
- Izgatavošanas gads
- Jaunākais atjauninājums
- Pēdējoreiz atjaunots
- Vecākais atjauninājums
- Pēdējoreiz atjaunots
- Ražotāji no A līdz Z
- Ražotājs
- Ražotājs no Z līdz A
- Ražotājs
- Apzīmējums no A līdz Z
- Apzīmējums
- Nosaukums no Z līdz A
- Apzīmējums
- Modelis no A līdz Z
- Modelis
- Modelis no Z līdz A
- Modelis
- Zemākā atsauce
- reference
- Augstākā atsauce
- reference
- Īsākais darbības laiks
- Darba laiks
- Garākā darbības ilgums
- Darba laiks
- Atbilstība
- Atbilstība
Mazā sludinājuma
Austrija
1 142 km
Elektriskās CNC preses bremzes Revolution Servo E
KK-IndustriesCNC elektrische Abkantpresse KKI Revolution DDM-50
Zvanīt
Stāvoklis: jauns, Spiediens: 50 Bending length: 2040 Frame width: 2040 Installation height: 590 Max. stroke length: 300 Dimensions (LxWxH): 3170x1960x2500 Approximate weight: 4850 Motor power: 11 CNC crowning via control: yes
CNC Servo Electric Press Brake KKI
Model: REVOLUTION DDM-5020 Servo-motor-driven press brake REVOLUTION
Servo-electric press brakes contain no hydraulic system and are the technology of tomorrow, thanks to their flexibility and reliability. The higher speed and precision of this new generation of machines offer you better efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology, distinguished by extensive experience and quality.
Standard equipment:
KK-Industries is the general representative of the DENER group of companies.
We have assembled a high-quality model for the European market.
The CNC servo-electric press brake from KK-Industries, made by DENER:
Technological advantages: Model REVOLUTION DDM
The CNC servo-electric press brake is characterized by its high precision, accuracy, and versatile applications.
- 100% electric, 0% hydraulic oil
- Up to 50% lower energy consumption compared to conventional hydraulic press brakes
- High efficiency and accuracy
- High bending speed and significantly quieter operation
- Full length between frames usable
- Lower maintenance costs
- Environmentally friendly
Ijdpfx Afod Etfyezetr
- Operator-friendly control panel
- Automatic calculation of bending steps directly from STEP or DXF files
- Up to 35% faster than hydraulic press brakes
Standard equipment:
3D color graphic control Delem 66T 17" touchscreen
Y1, Y2, X, and R axes CNC-controlled
CNC crowning via 3D control
X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models
X-axis 750 mm, R-axis stroke 250 mm for all other press brakes
We also make no compromises on the upper tool and die, equipping the KKI REVOLUTION CNC servo-electric press brake with high-quality tools from EUROSTAMP Italy.
Split gooseneck upper tool
4-V die block 60x60 (V=16, 22, 35, and 50 mm)
Servo-motor driven back gauge on linear guide and ball screw
Of course, every machine is only as good as its service. For this reason, we emphasize highly qualified staff with extensive experience in CNC sheet metal processing.
Laser safety device at the upper beam
CE safety equipment
Operating manual in GERMAN and ENGLISH
Options:
Additional back gauge axes controlled: X1, X2, R, Z1, Z2, Delta X
ATF Type 6-axis back gauge, X1, X2 - R Type back gauge,
X-Prime Type back gauge Hydraulic clamping for upper and lower tools
CNC 3D touchscreen control DELEM DA-69T
We recommend the following options:
- Manual crowning ¤ 2,329.00
- CNC crowning ¤ 4,658.00
KK-Industries GmbH
Mazā sludinājuma
Ahlen
1 219 km
Caurumotāju caurumošanas iekārta
MubeaKLH 500 / 610
Zvanīt
Stāvoklis: lietots, Funkcionalitāte: pilnībā funkcionāls, Izgatavošanas gads: 1990, iekārtas/transportlīdzekļa numurs: 0166890274834, vadības veids: rokasgrāmata, automatizācijas pakāpe: rokasgrāmata, darbības veids: hidrauliskais, perforācijas spēks: 50 t, izsituma diametrs: 100 mm, gājiena garums: 60 mm, kakla dziļums: 650 mm, maks. tērauda loksnes biezums: 15 mm, kopējais svars: 1 700 kg, kopējais garums: 1 500 mm, kopējais platums: 650 mm, kopējais augstums: 1 700 mm, jauda: 7,5 kW (10,20 zs), ieejas spriegums: 220 V, ieejas strāva: 26 A, ieejas frekvence: 50 Hz, ievades strāvas veids: trīsfāzu, pēdējās kapitālremonta gads: 2023, Aprīkojums: kāju tālvadības pults, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools
Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany.
Condition:
The machine has been professionally inspected by a machine technician and is in very good, fully functional condition. All functions have been tested.
Itodpfx Ajx Dtp Refzsr
Technical data (information without guarantee):
– Punching force: approx. 500 kN / 50 t
– Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel)
– Max. sheet thickness, steel: approx. 15 mm
– Throat depth: approx. 610 mm
– Stroke: approx. 60 mm
– Drive: hydraulic, manual/conventional control with foot switch
– Connection: 220/380 V, 3~, 50 Hz
– Power: approx. 7.5 kW
– Rated current: 26.3 A / 15.2 A
Scope of delivery:
– Muhr & Bender (Mubea) KLH 500/610 machine
– Including corresponding punching tools (see photos for details)
Important notes:
– The stated price applies to self-collection only.
– Dismantling, loading, and transport are the sole responsibility and at the cost of the buyer.
– Sale from used stock, without guarantee or warranty.
Inspection by appointment possible. Should you have any further questions, feel free to contact me.
Mazā sludinājuma
Mārupe
34 km
Pellet press
OGM 1,5OGM 1,5
Zvanīt
Stāvoklis: ļoti labs (lietots), Funkcionalitāte: pilnībā funkcionāls, augstuma regulēšanas veids: elektrisks, jauda: 90 kW (122,37 zs), ieejas spriegums: 380 V, Ready for work
Isdpfxjw Ulq Ao Afzetr

Uzziniet tagad
+44 20 806 810 84
+44 20 806 810 84
Ievietot sludinājumu tagad
*par sludinājumu/mēnesī
Mazā sludinājuma
Aurach
1 269 km
Instrumentu griezējs
DECKELFP 1
Zvanīt
Stāvoklis: labi (lietots), DECKEL FP 1 Universal Milling Machine, Serial No. 2101
Equipped with HEIDENHAIN 3-Axis Digital Readout
Iodpfx Afoxyc Tkszjtr
Travel (X/Y/Z): 300 x 160 x 340 mm
Manual Adjustment of Milling Head Arm: 100 mm
Increased Working Area: 300 x 260 mm
Spindle Speed (Vertical/Horizontal): 40 – 2,000 rpm
Number of Gear Steps: 16
Spindle Taper: SK 40
Tool Clamping: S20 x 2 (Deckel standard)
Quill Travel: 60 mm
Feed Rate X/Z Axis: 5 – 500 mm/min
Feed Control: Infinitely variable
Rapid Traverse X/Z Axis: 1200 mm/min
Y-Axis Feed: Manual
Fixed Angle Table: 600 x 210 mm
Vertical Head Swivelling: +/- 90 degrees
Weight: 710 kg
Dimensions (approx.): 1250 x 1200 x 1850 mm
Technical data not binding!
Features:
- For horizontal machining, the milling head is swivelled 90 degrees and moved to the rear.
- 3-axis precision digital readout by HEIDENHAIN
- Infinitely variable feed on X/Z axis
- The machine was partially overhauled by a specialist company a few years ago.
Equipment:
- 3-axis digital readout (HEIDENHAIN)
- Micro-coolant spray system
- Fixed angle table
- Chip tray
- Machine lamp
- Machine feet
Further accessories available on request!
Condition: Good to very good, from training workshop
Available from March 2026
Mazā sludinājuma
Vācija
1 120 km
Logu sistēma
WEINIGUnicontrol 6 mit GLS
Zvanīt
Stāvoklis: lietots, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
1 used Weinig Unicontrol 6 with GLS
-----
For sale on behalf of customer
Summary of Technical Data
-----
1. Cross-cut saw
-----
Cross-cut saw with pneumatic actuation, against 8-fold revolver stop
Spindle speed: 2800 rpm
Spindle diameter: 40 mm
Max. tool diameter: 350 mm
Motor power: 3 kW
Laser guide light for saw cut recognition
Manual length stop: 4100 mm
1. Tenoning and slot spindle
-----
Number of tools: 3 / 4 pcs.
Tool clamping length: 320 mm
Pneumatic vertical spindle stroke: 240 mm for timber thicknesses IV 68-92
Spindle speed: 3500 rpm
Spindle diameter: 50 mm
Max. tool diameter: 320 mm
Motor power: 11 kW
1. Profiling spindle - synchr. rotation (climb and conventional milling)
-----
Position: vertical, right
Number of tools: 1 pc.
Tool clamping length: 120 mm
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Max. tool circle: 232 mm
Motor power: 7.5 kW
2. Profiling spindle
-----
Position: vertical, right
Number of tools: 3 / 4 pcs.
Tool clamping length: 320 mm
Pneumatic vertical spindle stroke: 240 mm for timber thicknesses IV 68-92
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Max. tool circle: 232 mm
Motor power: 11 kW
3. Profiling spindle (hardware spindle)
-----
Position: vertical, right
Number of tools: 3 pcs.
Spindle speed: 6000 rpm
Spindle diameter: 40 mm
Max. tool circle: 180 mm
Motor power: 3 kW
Clamping length: 150 mm
4. Glazing bead saw horizontal/vertical sequenced
-----
Position: horizontal, top
Number of tools: 1 pc.
Tool clamping length: 40 mm
Spindle diameter: 40 mm
Motor power: 3 kW
Axial stroke: 2 positions
Radial stroke: 2 positions
Additional Features
-----
Rebating device for splinter-free rebating
Twin-part package
Return feed unit for single-operator use at working height: tilting trough
Screen control with 99 programs
Tilting window device
Electronic angle indicator for angled windows
INCLUDED: Window tooling by OPPOLD, year 2013:
Oppold IV 68/78/92 wood
Oppold IV 68/78 wood-aluminium
Sale of tools in the current condition and scope, and with the accessories as existing. Note on window cutting profiles, tool drawings, tooling system listings:
Engelfried GmbH does not guarantee that the actually available tools correspond to the named and illustrated systems.
Ijdsxvtggepfx Afzetr
(technical data as stated by manufacturer - without guarantee!)
Atklājiet vēl vairāk lietotu iekārtu
Mazā sludinājuma
Nettetal
1 344 km
Dzesētājs, ūdens dzesētājs; dzesētājs
Kühlmaschinen, MTA S.p.A.Aries G - ASG2 160 SSN (R454B)
Zvanīt
Stāvoklis: lietots, Izgatavošanas gads: 2024, Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: ASG2 160SSN - 2200412505, dzesēšanas jauda: 390 kW (530,25 zs), ievades strāvas veids: trīsfāzu, dzesēšanas veids: ūdens, kopējais svars: 4 211 kg, apkārtējās vides temperatūra (maks.): 47 °C, apkārtējās vides temperatūra (min.): -20 °C, ieejas spriegums: 400 V, spiediens: 3 stieple, temperatūra: 7 °C, tilpuma plūsma: 66,7 m³/h, sūkņa spiediens: 2,97 stieple, kopējais platums: 2 191 mm, kopējais garums: 4 505 mm, kopējais augstums: 2 423 mm, garantijas ilgums: 3 mēneši, Process chiller / air-cooled water chiller
Manufacturer: MTA S.p.A.
Model: Aries G ASG2 160 SSN (R454B) - Super Silent Noise
Itjdpfxjx Eg Uvo Afzer
The Aries ASG2 160 SSN are compact water chillers designed for outdoor installation (from -20°C to +47°C) featuring crankcase heater, phase monitoring, shell-and-tube evaporator, six scroll compressors, electronic expansion valves, compressor shut-off valves, buffer tank, P3 twin pump, electric trace heating, condenser filter, winter control with speed-controlled fans, and control & switch cabinet.
Cooling capacity (kW): 390
Chilled water temp. outlet/inlet (°C): 7 / 12
Volume flow (m³/h): 66.7
Available pump pressure (bar): 2.97
Ambient temperature (°C): 32
Cooling circuit:
Refrigerant R 454B, GWP 466, A2L
Number of refrigerant circuits: 2
Number of compressors: 6
Capacity stages: 6
Electrical data:
Voltage V 400, Frequency Hz 50, Phases 3,
Max. power consumption (kW): 193
Max. current (A): 319
Starting current per circuit (A): 582
Protection class: IP54
Dimensions:
Length (mm): 4505, Width (mm): 2191, Height (mm): 2423
Weight, empty/operating (kg): 3275 / 4211 kg
Connection DN 125 (Victaulic)
Serial No.: 2200412505
Year of manufacture: 2024
Condition: Visual: 2, Technical: ok & tested
used
Price: on request in Euro (plus VAT ex Nettetal)
MTA offers a functional test of the chiller at the Nettetal branch together with the buyer upon request before collection.
(Technical changes and prior sale reserved!)
Location: MTA Deutschland GmbH, 41334 Nettetal
Mazā sludinājuma
Austrija
1 142 km
Plākšņu šķēres hidrauliskās šūpoles griešanai
KK-IndustriesTafelschere KK kletzer SW 3200 x 6 mm
Zvanīt
Stāvoklis: jauns, Sheet length: 3,200 mm
Sheet thickness: 6.0 mm
Itodpfx Afoh Talzezsr
Cutting width: 3,200 mm
Total power requirement: 7.5 kW
Weight approx.: 6,250 kg
Dimensions (LxWxH): 4,180 x 2,150 x 2,000 mm
Technical Data:
- Sheet thickness: 6 mm
- Cutting length: 3,200 mm
- Cutting angle: 1.30°
- Backgauge: motorized, 1,000 mm
- Motor power: 7.5 kW
- Length: 4,000 mm
- Width: 1,700 mm
- Height: 1,800 mm
- Weight: 6,250 kg
Equipment:
- Swing beam shear design
- NC preselection control ELGO P 40 T
with front-operated backgauge and cutting gap adjustment via control panel
- Motorized backgauge up to 1,000 mm
- Clearly arranged operator panel mounted on a swing arm
- Hydraulic hold-downs positioned close to the cutting edge
- Foot switch
- Cutting gap adjustment
- Cutting line illumination
- Wide support table with ball transfers
- Foldable finger guard, 1,000 mm
- 1 side stop with T-slot
- 2 sheet support arms with T-slot
- Easy knife change and regrinding
- Adjustable cutting length for efficient processing
- Bottom blade with 4 cutting edges (reversible)
- Top blade with 2 cutting edges (reversible)
- Qualified customer service
- Operating manual in ENGLISH
- Machine and equipment in compliance with CE regulations
Mazā sludinājuma
Hessisch Lichtenau
1 157 km
CNC 5 asu HMC apstrādes centrs, frēzēšanas centrs, apstrādes centrs ar CNC vadību SIEMENS 840D SL
LICONLiflex 1266 PC B1
Zvanīt
Stāvoklis: lietots, CNC 5-axis HMC – Horizontal Machining Center, Milling Center, Production Center
Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned: 2017
Equipped with SIEMENS 840D SL (Solution Line) CNC path control with 5 simultaneously controlled axes
Travel distances: X: 1200 mm, Y: 660 mm, Z: 650 mm
A-axis as swiveling bridge +/– 135° (270° total)
B-axis 360° infinite rotation
Axis acceleration X + Y: 6 m/s²
Z-axis acceleration: 9 m/s²
Feed force X + Y: 7500 N
Feed force Z: 10000 N
Positioning tolerance (X/Y/Z): 0.008 mm
A-axis swivel speed: 180° rotation in 4 seconds
Interference circle diameter in swiveling bridge: max. 1400 mm
Transport load in swiveling bridge: max. 700 kg
Tool holder: HSK 63
Spindle speed: max. 12,000 rpm, stepless
Spindle power: 37 kW at 40% duty cycle
Spindle torque at 40% duty cycle: 85 Nm
Max spindle torque: 100 Nm
Tool change time (chip-to-chip): approx. 3.7 sec
Tool diameter with adjacent spaces filled: Ø 140 mm
Tool diameter with adjacent spaces free: Ø 250 mm
Tool length: max. 400 mm
Tool weight: max. 20 kg
Power supply: 400 Volt, 50 Hz
Connected load: 80 kVA
Compressed air connection: 5-8 bar
Itodpfet Ac Efex Afzsr
- LIFLEX MSP 80/63/85/12,000 motor spindle (37 kW/40% duty cycle) with liquid cooling and recooling unit
- 2-axis rotary-tilt table LICON as B and C axes, with hydraulic axis clamping
- Zero-point clamping system on the swivel axis rotary table
- Double pallet changer (without pallets, new pallets must be purchased)
- Media transfer with 5 single-acting pressure lines for oil or air, for workpiece clamping on the pallets
Hydraulic functions 30-150 bar, with pressure monitoring (controllable via M functions)
- Tool changer with 30 tool positions, disk turret design
- Machine configured for dry machining with MMS minimum quantity lubrication system
- MMS-IKZ, internal MMS coolant supply through the spindle
- Scraper belt chip conveyor, discharge height 1150 mm
- Licon ECO-Mode (energy-efficient unit operation)
- Direct position measuring system on all axes
- Logged control voltage on hours = approx. 7,500 h
Operating space required (L x W x H): 9000 x 5000 x 3800 mm
Transport space required (L x W x H): 6100 x 4400 x 3600 mm
Base machine weight: approx. 21 t
Total weight: approx. 24 t
Very good condition
Mazā sludinājuma
Sofia
1 589 km
Kontenitur Modulari House Prefabbrikat
Baucontainer Lagercontainer containerModulhaus modulheim Bungalow Pavillon WC
Zvanīt
Izgatavošanas gads: 2022, Stāvoklis: jauns, For more price and more information visit our
Itodpfxofhtf Ho Afzsr
Mazā sludinājuma
Aurach
1 269 km
Instrumentu griezējs
DECKELFP 1
Zvanīt
Stāvoklis: ļoti labs (lietots), DECKEL FP 1 Tool Milling Machine No. 2101
with HEIDENHAIN 2-axis digital readout
Travel ranges: X/Y/Z: 300 x 160 x 340 mm
Manual adjustment of milling head arm: 100 mm
Work area extension to: 300 x 260 mm
Spindle speed, vertical/horizontal: 40 – 2,000 rpm
Gear steps: 16
Spindle taper: SK 40
Tool clamping: S20 x 2 (Deckel standard)
Quill travel: 60 mm
Feed X/Z-axis: 5 – 500 mm/min
Feed adjustment: stepless
Rapid traverse X/Z-axis: 1200 mm/min
Feed Y-axis: manual
Fixed angular table: 600 x 210 mm
Swiveling vertical head: +/- 90 degrees
Weight: 710 kg
Dimensions: approx. 1250 x 1200 x 1850 mm
Technical data non-binding!
Features:
For horizontal machining, the milling head is swiveled by 90 degrees and pushed to the rear.
2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719
Stepless feed in X/Z-axis
The machine was partially overhauled by a specialist company several years ago.
Equipment:
- 2-axis HEIDENHAIN digital readout
Iodpfx Aexyc N Esfzjtr
- Fixed angular table
- Chip tray
- Machine lamp
- Machine feet
Additional accessories available on request!
Condition: Good to very good, from training facility
Available from March 2026
Mazā sludinājuma
Oberkochen
1 323 km
Logu sistēma
Haberkorn,Okoma,GoetzingerFZS1,SF3F,OBM Plus
Zvanīt
Stāvoklis: lietots, Slot spindle 1 pc.
Number of milling units: 0 pcs.
Spindle diameter: 40 mm
Small window manufacturing line consisting of:
-----
1) Haberkorn FZS1 slot mortising machine
2) Okoma SF3F table spindle moulder
3) Oertli tooling for Haberkorn and Okoma machines
Wooden window set IV 68/78/88 and one set of wood-aluminium windows IV 68/78, year of manufacture 2011
4) Götzinger OBM Plus corner hinge and handle drilling machine, Maco MultiMatic hardware
-----
Technical manufacturer description:
- Haberkorn FZS1 slot mortising machine with automatic feed
- Stepless height adjustment D 40 mm
Cut-off saw:
- Spindle arrangement: top
- Three-phase motor: 3 kW
- Spindle diameter: 30 mm
- Speed: 2800 rpm
- Saw blade diameter: 400 mm
- Automatic brake with speed monitoring
- Horizontal positioning pneumatic, manually adjustable
- Guard and extraction hood with suction connection diameter: 100 mm
Slot spindle D 40 mm:
- Power: 7.5 kW
- Speed: 4200 rpm
Itsdjxa Hi Nopfx Afzsr
- Usable length: 252 mm
- Max. tool diameter: 340 mm
- 220 mm stepless height adjustment via precision ball screw
- Guard and extraction hood with suction connection diameter: 180 mm
- Automatic brake with speed monitoring
Studio table:
- Swivel range +/- 65 degrees
- Automatic change of counterbearing timber (programmable)
- Pneumatic clamp
- High-precision electronic angle display
- Automatic length compensation
- Counterbearing timber aligned with the cutting plane for each angle setting
Special equipment:
- Laser for workpiece positioning
- Pneumatic saw positioning
- Length stop LA 2500 mm + 1850 mm extension
-----
2) Okoma SF3F table spindle moulder with vertical-lift spindle, 3 tools
- Extraction port 2 x 120 mm
- Spindle length: 270 mm
- Fence with fine adjustment and turret head
- Triple lift, max. stroke 90 mm
- Glazing bead cutting saw with guard and extraction hood, 80 mm diameter
- 8-roll power feed with stand and hold-down arm, required for glazing bead saw setup
- Pneumatic edging feed unit for edge gears, speed 6000 rpm
- 2 x 3 kW motors
- Tool mounting diameter: 30 mm
-----
3) Oertli tooling for Haberkorn and Okoma machines
- 1 set wooden windows IV 68/78/88
- 1 set wood-aluminium windows IV 68/78
Sale of tools as per the condition, scope, and accessories available in our warehouse. Note regarding window cross-sections, tool drawings, and tool system lists:
Engelfried GmbH accepts no warranty that the actual tools available correspond to the systems named and depicted.
-----
4) Götzinger OBM Plus corner hinge and handle drilling machine
- Corner and scissor hinge, plus handle drilling
- Vertical drilling unit with:
- Quick-change drill head
over-foot pedal-actuated pneumatic feed
- 1x handle drill head 24 mm
- 1x double-head corner hinge drill
- Maco MultiMatic hardware
- 1x adjustable folding stop left with 6 stops
- 1x adjustable folding stop right with 6 stops
- 1x machine stand complete with storage shelf
- 220/400 V, 60 Hz, 1.3 kW
- 1x roller conveyor approx. 1 m long with 2 rollers
- 1x roller conveyor approx. 1.5 m long with 3 rollers
-----
Price for the above-mentioned machines on request!
Plus packing and shipping
-----
(technical data according to manufacturer – without...
Mazā sludinājuma
Bockhorn
1 124 km
Vienvirziena dvīņu skrūvju ekstrūders
REIFENHÄUSERRZE 85 41:D
Zvanīt
Izgatavošanas gads: 2007, Stāvoklis: gatavs lietošanai (lietots), Funkcionalitāte: pilnībā funkcionāls, REIFENHÄUSER REITRUDER RZE 85 41:D
Year of manufacture: 2007
Drive/Motor: 265 kW
Screw diameter: 85 mm
Output approx. 900 kg/h
With gear pump, dosing unit, and working platform
Latest application:
The plant was used to produce PP PIPES up to 630 mm in diameter.
Reitruder technology utilizes co-rotating twin screws. We have adapted this twin-screw technology for direct extrusion lines—mainly for inline compounding. This merges multiple process steps into one.
Sustainability
Process 100 percent recycled material
Combined with efficient vacuum units, the Reitruder technology enables direct processing of recycled PET bottle flakes—without energy- and time-consuming pre-drying.
Cost-effectiveness
Reduce raw material costs by 30 percent
Our Reitruder twin-screw technology processes high levels of additives and fillers. Instead of pre-mixed compounds, fillers such as calcium carbonate or talc are continuously dosed in. With direct extrusion, energy costs are reduced compared to the two-stage compounding process: Without the need to first solidify and then re-melt the plastic, the Reitruder produces from start to finished product in a single run.
Direct extrusion
High quality without detours
Direct extrusion delivers quality levels in semi-finished and finished products that previously were only achievable with significant technical effort. Take advantage of today’s technology by combining multiple process steps into one.
Reitruder RZE 85
EXTRUSION
Alongside additional innovations, the co-rotating twin-screw extruder Reitruder RZE 85 was the centerpiece of Reifenhäuser’s presentation at the NPE exhibition. A differentiated design concept with new construction features was developed. The screw geometry was adapted to evolving requirements through greater channel depth and a newly designed feed section. These measures alone improve feed when processing PET flakes or regrind and increase the volume for filler dosing. This results in key benefits when processing lower-quality raw materials. Additionally, increased degassing efficiency allows even materials with a moisture content up to 0.5 percent to be used, significantly reducing the need for pre-drying.
Applications
• Compounds
• Recycled polymers
• Thermoforming film
• Cast film
• Blown film
• Foam sheet and board
• Strapping tape
Price: €35,000.00
Isdpsxzr H Nsfx Afzotr
LOCATION:
SACHAL EXTRUSIONSMASCHINEN
D-26345 Bockhorn-Grabstede
Tel = WhatsApp
Mazā sludinājuma
Austrija
1 142 km
4 ruļļu hidrauliskā locīšana
DURMAHRB-4 2513
Zvanīt
Stāvoklis: jauns, Bending pre-curve: 10.0 mm
Sheet length: 2550 mm
Sheet thickness: 13.0 mm
Total connected load: 15.0 kW
Approximate weight: 10.6 t
Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m
Image similar
Bending capacity: 13.0 mm
» at 3x upper roll diameter
Pre-bending: 10.0 mm
Iedpfxod Ab H Ie Afzotr
» at 1.5x upper roll diameter
Upper roll diameter: 270 mm
Lower roll diameter: 250 mm
Side roll diameter: 220 mm
Maximum opening: 50 mm
Working height: 1,155 mm
• Fully hydraulic drive for the upper and lower rolls via planetary gears
• Digital readouts for side roll positions
• Hydraulic drop-end bearing
• Infinitely adjustable rolling speed
• Device for cone bending
• Hardened rolls
• Hydraulic side roll adjustment synchronized via PLC
• Hydraulic lower roll adjustment via torsion shaft
• Pressure-adjustable lower roll
• Electric and hydraulic overload protection
• Mobile control panel
• Machine and equipment according to CE regulations
For catalog, see the following link:
Important points for conical rolling:
• Maximum sheet thickness is 50% of nominal capacity
• Cone length must be a maximum of 30% or more than 60% of the roll length
• Hardened rolls are recommended
Mazā sludinājuma
Siegen
1 271 km
Ceļojošā kolonnu frēzmašīna
SoraluceFR16000
Zvanīt
Stāvoklis: darbnicā atjaunots (lietots), Izgatavošanas gads: 2002, X assis pārvietošanās distance: 16 000 mm, Y ass pārvietošanās attālums: 3 200 mm, Z ass pārvietošanās attālums: 1 500 mm, ātrā padeve X assī: 15 000 m/min, ātrgaita Y ass: 15 000 m/min, ātrā pārvietošana pa Z asi: 15 000 m/min, vārpstas ātrums (maks.): 4 000 apgr./min, vārpstas ātrums (min.): 20 apgr./min, 100%Retrofit by Dornhöfer
The Difference.
Including installation & commissioning!
Year of manufacture: 2002
Control unit: Heidenhain TNC 640 / TNC 7
Travel paths: X-axis (mm) 16,000* (see below)
Y-axis (mm) 3,200
Z-axis (mm) 1,500
Spindle speed range: min⁻¹ 20 – 4,000
Feed rates X, Y & Z axis (mm/min): 2 - 12,000
Max. rapid traverse speed X, Y & Z axis (mm/min): 15,000
Milling head: Automatic orthogonal milling head H10, 1° increment
Tool holder: ISO 50, DIN 69871 AD
Main spindle drive power: 100% duty cycle KW 37
- Automatic tool changer with 60 magazine positions
- Coolant system with 20 bar & internal coolant supply (IKZ)
- Chip conveyor with floor discharge
- Ergonomic operator platform
- Danger zone safeguarding
Itedpfx Afjv S Upfozjr
- 3D thermal expansion compensation
- INA linear guides
*Adaptive X-axis length: We supply the machine bed in the length you require, up to a maximum of 16,000 mm.
100% RetroFIT – our core business! For us, this means offering a machine that can truly only be compared to a new product, but which also provides you with many additional advantages:
- Latest CNC control technology combined with proven machine stability
- Significant CO₂ savings compared to a new machine
- Shorter delivery times
- Often savings on costly foundation work
- Much lower investment costs
All mechanical components (e.g. ball screws, guides, roller bearings, etc.) have been renewed. Our engineers have designed the entire electrical peripherals—with a focus on the most efficient technologies—such as the latest drive, control, and regulation technology. Implementation included new cabling, a completely new switch cabinet, as well as the latest Heidenhain control system with a broad range of innovative options.
The completely new and innovative hydraulic concept meets the latest requirements and delivers maximum efficiency.
Visually, the machine is indistinguishable from a new one thanks to its refurbishment: The entire machine was completely disassembled—including every screw—sanded, primed, and then coated with a durable 2-component epoxy paint.
We've equipped the machine with a safety concept tailored individually to the operator's needs, providing the highest levels of safety, flexibility, and ergonomics.
You receive a state-of-the-art machine, fully up to current technological standards, combined with substantial CO₂ savings.
Mazā sludinājuma
Topole
573 km
Lentu savilkšanas mašīna TV02
Schneider&OzgaTV02
Zvanīt
Stāvoklis: teju kā jauns (izstādes iekārta), Izgatavošanas gads: 2015, We offer for sale a strapping machine, model TV02, manufactured by Schneider & Ozga.
Condition: very good, like new, never used.
The fully automatic strapping machine TV 02 stands out due to its maintenance-free direct drives and extremely simple operation.
- Strapping performance: up to 30 single strappings and 15 parallel strappings per minute
- Strap width: 5 to 12 mm
- Various frame sizes available
- Conveyor belts with four straps
- Strap seal off-center
Iedjixz Tcjpfx Afzetr
TECHNICAL DATA
- Performance: up to 30 single strappings/minute, up to 15 parallel strappings/minute
- Package size: Width: max. 600 mm, min. 160 mm; Height: max. (without press) 650 mm, max. (with press) 550 mm, min. 10 mm
- Package weight: max. 25 kg
- Strapping material: Polypropylene (PP) strap; Width: 5 - 12 mm; Thickness: min. 0.35 - 0.70 mm
- Seal type: Thermo-welded seal
- Coil: Core diameter: 200/228 mm; Outer diameter: approx. 450 mm; Width: 165-210 mm
- Electrical: 230 V, 1 phase, 50 Hz
- Power consumption: 1.1 kW at 230V
- Pneumatics: Operating pressure: 4 bar; Consumption per standalone machine: 90 l/min (3 l/strapping) free air
- Pressing force: 200 N (cylinder diameter 25 mm)
- Strap tension: max. 200 N
- Conveyor speed: approx. 26 - 59 m/min
STANDARD EQUIPMENT
- Extraction system
- Automatic strap feed
- Strap sensing
- Infeed and outfeed synchronization with plug connector
- Color: RAL 5007 (brilliant blue)
- Continuously adjustable conveyor belt speed
- Short heating-up time
- Motors without mechanical brake
- PLC control with four adjustable programs for different products
- Continuously adjustable tension return
- Lockable touchscreen with freely selectable code
- Strapping counter
- Maintenance-free direct drives
Price: €12,000 net
Machine in stock, available immediately
Location: 89-600 Chojnice/Poland
If interested, please get in touch.
Mazā sludinājuma
Rīga
32 km
Stainless steel food mixer 100l
Alistar EuropeAE100
Zvanīt
Izgatavošanas gads: 2024, Stāvoklis: jauns, Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: AE150, INDUSTRIAL FOOD DRUM MIXER 100L
The Industrial Food Mixer 100 l features a 1.5 kW inverter motor and a
stainless-steel drum, ideal for gently mixing sensitive products like
sauerkraut, coleslaw, meats, and salads. With adjustable motor speeds
Iedpfxod R Iwwj Afzjtr
and interchangeable blades, it accommodates various mixing needs.
Suitable for small to medium-sized food operations, such as restaurants
and supermarkets, it efficiently reduces labor costs and production time,
quickly becoming an essential tool for mixing produce, cheese, fruits, and
vegetables.
Mazā sludinājuma
Sankt Leon-Rot
1 359 km
Zobu sānu slīpmašīna
KlingelnbergViper 500 W
Zvanīt
Stāvoklis: teju kā jauns (lietots), Izgatavošanas gads: 2020, darbības stundas: 18 000 h, Funkcionalitāte: pilnībā funkcionāls, KLINGELNBERG VIPER 500 W Gear Grinding Machine, Like-New Condition
All-inclusive machine, equipped for both internal and external gear grinding
Special converter installed for EUR kW to U.S. power supply (simplifies global installation)
Availability due to restructuring at a high-tech family-run business (no automotive production)
Working Area & Capacities
- Max. workpiece diameter: 500 mm
- Max. grinding stroke: 500 mm
- Table working area (min.–max.): 300 – 800 mm
- Distance spindle center to table (min.–max.): 442 – 1042 mm
- Gear module (generating grinding): 0.5 – 22
- Swivel angle (min.–max.): –180° to +45°
Grinding System
- Grinding wheel diameter (min.–max.): 221 – 350 mm
- Grinding worm diameter (min.–max.): 221 – 350 mm
- Max. grinding wheel width: 75 mm
- Max. grinding worm width: 150 mm
- Grinding spindle drive: 37 kW
- Max. grinding wheel speed: 6,000 rpm
Table & Feed Axes
- Table diameter: 400 mm
- Table bore Ø x depth: 100 x 500 mm
- Max. table speed: 1,000 rpm
- Max. axial feed: 20,000 mm/min
- Max. radial feed: 12,000 mm/min
- Max. tangential feed: 20,000 mm/min
Electrical Values & Dimensions
- Total power consumption: 60 kVA
- Machine dimensions (L x W x H): 4,220 x 3,120 x 2,526 mm
- Filter unit dimensions (L x W): 3,490 x 2,250 mm
- Net weight approx.: 19,300 kg
Machine Configuration – VIPER 500 W
Base machine and Options
- VIPER 500 W base machine
- Preparation for internal grinding arms
- Internal grinding attachment V5 for straight or helical internal gears
- Measuring system for profile, lead, and pitch of external gears
- Measuring system for profile, lead, and pitch of internal gears V5
- Touch Trigger Phasing System
- Power supply with voltage drop compensation ESR
- 100-mm table adapter
- Preparation for hydraulic clamping devices
- Hydromechanical pull-rod clamping system
- Grinding oil conditioning system with band filter 100
- Fire extinguishing system
- Automatic work area door
- Cleaning system with spray gun
- Crane/hoisting unit integrated in enclosure
- Isolation transformer
- Voltage stabilizer and isolation transformer
- Signal light / signal tower
Software Packages
- Gear PRO software
Itodpfjxx T N Tsx Afzer
- Software for grinding spline shafts
- Software for testing spline shafts
- BIAS control software for gear grinding
- CBN grinding wheel software
- ADI dresser process optimization
- DLC lifetime monitoring for dressing tools
- Flexible profile corrections for grinding operations
Consumables
- Endless filter belt
- Assembly/disassembly tool for filter belt 100
- Diamond dressing rolls
- CVD dressing roll D200 R1 for profile grinding
- Custom CVD dressing roll for generating grinding
- Grinding wheels
- Grinding wheel D350 B60 for profile grinding
- Grinding wheel D350 B45 for profile grinding
- Profiled grinding wheel D350 B150 for generating grinding
- Spacer rings / intermediate disks
- 4 intermediate disks B100
- 22 intermediate disks B60
- 30 intermediate disks B45
- 37 intermediate disks B30
Additional Components
- Grinding wheel flange without intermediate disk
- Set of standard probes / measuring probes
Additional Options
- Warranty extension from 12 to 24 months
- Closed Loop 1.0 basic version
- Interface for external automation
Mazā sludinājuma
Roreto
1 791 km
FORMĀTS UN MALU APLĪMĒŠANA RHINESTONE SOFTFORM
BIESSE + RBOStream SB softforming + FDT CN + Winner
Zvanīt
Stāvoklis: ļoti labs (lietots), KOMPLETĀ ABPUSEJI FORMĀTU UN MALU LAMINĒŠANAS LĪNIJA (arī SOFTFORMING), ar caurplūdes urbjmašīnām, šķēlētāju un ātru automātisko transportēšanas tehnoloģiju. Salikta no:
A) Iekraušanas stacija – kraušanas iekārta (portāls) "RBO (BIESSE)" Mod. Winner C (1)
B) 1. abpusējā formātu un malu laminēšanas iekārta "BIESSE" Mod. Stream SB1 11.0 Softforming
C) 1. pagriešanas stacija (90° gareniski-šķērseniski) "RBO (BIESSE)" Mod. GPK-1
D) 2. abpusējā formātu un malu laminēšanas iekārta "BIESSE" Mod. Stream SB2 9.5
E) 2. pagriešanas stacija (90° taisni vai šķērseniski-gareniski) "RBO (BIESSE)" Mod. GPK-2
Iodpjttgy Hjfx Afzetr
F) CNC vadīta caurplūdes urbjmašīna "BIESSE" Techno FDT CN (2 gab. horizontālo urbšanas atbalstu, 6 gab. vertikālo apakšējo urbšanas atbalstu un 3 gab. vertikālo augšējo urbšanas atbalstu)
G) CNC vadīta caurplūdes urbjmašīna "BIESSE" Techno FDT CN (2 gab. horizontālo urbšanas atbalstu, 6 gab. vertikālo apakšējo urbšanas atbalstu un 3 gab. vertikālo augšējo urbšanas atbalstu)
H) 3. pagriešanas stacija (90° taisni vai šķērseniski-gareniski) "RBO (BIESSE)" Mod. GPK-3
I) Garenvirziena plākšņu zāģis (šķēlētājs) "GM (for BIESSE)" Mod. Split 4-84 LT
L) Izkrāvēja stacija – kraušanas iekārta (portāls) "RBO (BIESSE)" Mod. Winner SC (2)
Mazā sludinājuma
Austrija
1 142 km
Profilu liekšanas mašīnas ar hidraulisko padevi
KK-IndustriesProfileinrollmaschine Sahinler HPK 50
Zvanīt
Stāvoklis: jauns, Shaft diameter: 50 mm
Upper roll diameter: 152 mm
Lower roll diameter: 162 mm
High-performance hydraulics: 8
Working speed: 4.5 m/min
Motor power: 1.1 kW
Length: 810 mm
Width: 950 mm
Height: 1,500 mm
Approx. weight: 500 kg
Technical specifications:
- Welded steel frame
- All three rollers are motor-driven
- Hardened shafts made of special steel
- Upper roll hydraulically adjustable
- Horizontal and vertical working position
- Standard rollers
- Guide rollers
- Equipped with a brake motor for precision bending
- Portable control panel
Options:
- Digital display EURO 700,--
- NC control unit EURO 7,000,--
- Angle-side guide rollers EURO 1,400,--
HPK 50 File Type Size Min. Dia Notes
1 60x10 20x10 600 300 Standard Rolls
2 100x15 50x10 600 300 Standard Rolls
3 35x35 15x15 600 300 Standard Rolls
4 Ø35 Ø20 600 300 Optional Rolls
5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls
6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls
Itjdpod Ab H Sjfx Afzor
7 70x30x3 30x15x2 1500 400 Optional Rolls
8 50x3 20x2 1600 400 Optional Rolls
9 50x50x6 30x30x3 600 400 Optional Rolls
10 50x50x6 30x30x3 900 600 Optional Rolls
11 60x7 30x4 600 400 Standard Rolls
12 60x7 30x4 700 400 Standard Rolls
13 60x7 30x4 700 400 Standard Rolls
14 UPN 80 UPN 30 800 400 Optional Rolls*
15 UPN 80 UPN 30 1200 600 Standard Rolls*
* Special washer (spacer) may be required / Only with special beam bending attachment
• Capacities refer to a plate yield strength of 260 N/mm²
Mazā sludinājuma
Neuwied
1 331 km
Traverss no SLP
SLPRTS110
Zvanīt
Stāvoklis: labi (lietots), SLP traverses, RTS 110, used, 3000 kg shelf load capacity
Price excl. VAT.
The goods are also available in other quantities and versions.
This package includes:
1 x Traverse, 2.70 m (orange)
2 x Safety pins
Optional: With 38 mm chipboard including depth rails for €90 per level
Manufacturer: SLP
Condition: used, good condition
Isdpfx Aeigquaofzetr
Traverse length: 2.70 m
Shelf load capacity: 3000 kg
5,000 pcs available
Accessories such as:
- Floor anchor
- Connectors
- Load capacity warning signs
- Impact protectors
- Guard rails
- Gratings
- Rear mesh panels
- Depth rails
- Partition rails
and much more... Simply inquire with us!
Mazā sludinājuma
Borken
1 273 km
Vakuuma sūknis
VACUUBRAND VARIOMV 10C EX VARIO
Zvanīt
Stāvoklis: ļoti labs (lietots), Vacuubrand Chemical Diaphragm Pump
Here we offer a Vacuubrand chemical diaphragm pump.
Itsdpfxjq Suwmo Afzer
VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO
Technical Data:
Max. pumping speed at 50Hz: 8.1 m³/h
Ultimate vacuum: 2 mbar / 1.5 torr
Ultimate vacuum with gas ballast: 10 mbar / 7.5 torr
Number of cylinders: 8
Number of stages: 4
Vacuum gauge/controller type: without controller
Ambient temperature, lower limit (operation): 10°C
Ambient temperature, upper limit (operation): 40°C
Ambient temperature, lower limit (storage): -10°C
Ambient temperature, upper limit (storage): 60°C
Max. absolute outlet pressure: 1.1 bar
Inlet connection: small flange KF DN 25
Outlet connection: small flange KF DN 16
Rated power: 0.5 kW
Minimum speed VARIO: 30 min⁻¹
Maximum speed: 1500 min⁻¹
Rated speed: 1500 min⁻¹
IP protection class to IEC 60529: IP 54
Dimensions (L): 560 mm
Dimensions (W): 457 mm
Dimensions (H): 410 mm
Weight: 61 kg
Noise level (sound pressure) at 50 Hz or 1500 rpm / 62% (VARIO) /1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®): 42 dBA
Ex certification
Pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X
External area with inert gas purge: II 2G Ex h IIB T4 Gb X
External area without inert gas purge: II 3G Ex h IIB T4 Gc X
Motor: II 2G Ex db IIB T4 Gb
NRTL certification: No
Rated voltage range 1: 230 V
Mains frequency voltage range 1: 50 Hz
Weight: 61 kg
Model: MV 10C EX VARIO
Condition: used
Scope of delivery: (see picture)
(Technical data subject to change and errors excepted!)
For further questions we are happy to assist you by phone.
Uzticamības zīme
Machineseeker sertificēti tirgotāji

Mazā sludinājuma
Roreto
1 791 km
Automātiskā urbšanas un ievietošanas līnija
BIESSETechno Logic CN + Infor CN
Zvanīt
Stāvoklis: ļoti labs (lietots), CNC-controlled (automatic) drilling and dowel inserting line, consisting of:
Itsdpfow Uhbksx Afzer
O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC
- 2 motorized throughfeed belts, feed speed up to 75 m/min.
- 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 22 drilling spindles)
- 5 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 kW and various drilling heads)
- 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 kW and various drilling heads)
- 5 upper vertical workpiece clamps
- 2 endless screws for chip removal
- PC control type CNI
O03009B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno INFOR with C.N.
- 2 motorized throughfeed belts, feed speed up to 75 m/min
- 2 horizontal drilling units (each with 6 horizontal supports – glue application and dowel insertion tools)
- 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 kW and various drilling heads)
- 2 upper vertical workpiece clamps
- 2 endless screws for chip removal
Mazā sludinājuma
Austrija
1 142 km
CNC giljotīnas hidrauliskās šķēres
KK KletzerCNC Tafelschere KK kletzer AS 3006
Zvanīt
Stāvoklis: jauns, Sheet length: 3035 mm | Sheet thickness: 6.0 mm | Total power requirement: 11 kW | Weight approx.: 8,300 kg | Dimensions (LxWxH): 3775 x 2955 x 2260 mm
Our strong brand, KKI CNC GUILLOTINE SHEAR, link motion design
Model AS 3006 has everything you need for perfect cutting.
CNC-guided guillotine shear by KKI
Thanks to durable and robust mechanics and hydraulics, precise ball screw backgauge, and user-friendly CNC control, Dener guillotine shears are highly effective production machines. Our standard portfolio includes shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters. Higher sheet thicknesses and cutting lengths are available on request.
Dener guillotine shears owe their long service life to their particularly robust, fully welded frame construction. The entire machine body, cutting beam, and backgauge are highly resistant to twisting and deformation, ensuring top cutting quality.
By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade gap.
Our strong brand KKI CNC GUILLOTINE SHEAR, link motion design
Model AS 3006 has everything you need for perfect cutting.
Technological advantages
- Fast and precise cuts
- Sturdy, long-lasting frame construction
- Automatic blade gap adjustment
- Easy operation
- Low maintenance costs
- High safety standards
- Use of components from renowned manufacturers
- Low unit costs
Our strong brand KKI
CNC GUILLOTINE SHEAR link motion design
Model AS 3006 has everything you need for perfect cutting.
With our patented blade support system,
the upper blade can be finely adjusted and stabilized,
ensuring precise, high-quality cuts,
preventing so-called banana cutting.
Technical data:
Sheet thickness: 6 mm
Cutting length: 3,035 mm
Cutting angle: 0.5–3°
Number of holddowns: 15
Backgauge: 1,000 mm via CNC
Motor power: 11 kW
Cutting speed (0.5–3°): 29–12 cuts/min
Throat depth: 350 mm
Oil tank: 200 liters
Length: 3,775 mm
Width: 2,300 / 2,955 mm
Height: 2,260 mm
Itsdpfx Afjd Egq Aozor
Weight: 8,300 kg
• Link motion design
• CNC control:
- Backgauge
- Cutting angle
- Blade gap
- Cutting length
• Ball screw spindles for backgauge
• Balls in the table
• 1,500 mm side stop
• 2 support arms, each 1,000 mm
• Cutting line illumination
• 1,000 mm foldable finger guard
Optional pneumatic sheet support system, EUR 6,320
We have many references!
Mazā sludinājuma
Borken
1 273 km
Klimata kamera ar mitrumu 34 litri
WeissWKL 34/60 -60°C bis 150°C
Zvanīt
Stāvoklis: ļoti labs (lietots), Weiss
Type: WKL 34/60
Weiss Climate Chamber, Air-Cooled
Refrigerant converted to R-452A
-60°C to +150°C
Chamber volume: 34 liters
Standard feedthroughs installed:
R1 NW 50 mm
L1 NW 120 mm
Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm
External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm
Technical specifications for temperature testing:
Temperature range: -60 to +150°C
Temperature deviation (stabilized, according to IEC 60068-3-5):
Temporal fluctuation at center of workspace: ±0.3 to ±1 K, ±1 to ±2 K
Spatial deviation (temperature gradient): 2 to 4 K
Rate of temperature change (per IEC 60068-3-5):
Heating: 2.5 K/min
Cooling: 3 K/min
Heating compensation, max: 550 W
Specifications for climate testing:
Temperature range: +10 to +95°C
Humidity range: 10 to 98% r.H.
Temperature and humidity differences (stabilized, per IEC 60068-3-5):
Iedpjtr Dinefx Afzjtr
Temporal temperature fluctuation at center: ±0.3 to ±0.5 K
Spatial temperature deviation: ±0.5 to ±1.5 K
(temperature gradient: 1 to 3 K)
Temporal humidity fluctuation at center: ±3 to ±5% r.H.
Operational data:
Test chamber lighting: Halogen bulb 12V, 20W
Rated voltage: 1/N / PE AC 230 V ±10 %, 50 Hz
Rated power: 2.5 kW
Rated current: 11 A
Required circuit protection: 16 A slow-blow
Heat dissipation for air-cooled chambers:
Max. heat emission to environment: 1700 W
Refrigerant: R-452A / R23
Weight: 140 kg
Safety information for buyers:
The following procedures are carried out on all chambers we offer before sale:
1. Functional check and replacement of necessary components
2. New fill with legally compliant refrigerant if needed
3. Leak test with certificate
4. After successful checks, the chambers undergo a documented test run.
Condition: used
Scope of delivery: (See picture)
(Subject to modifications and errors in technical data and specifications!)
Feel free to contact us by phone for further questions.
Mazā sludinājuma
Roreto
1 791 km
AUTOMĀTISKĀS URBŠANAS UN URBŠANAS IEKĀRTAS
BIESSE2 x Techno FDT CN
Zvanīt
Stāvoklis: ļoti labs (lietots), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW PARTS, minimum width 100 mm
W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC
- 2 horizontal drilling units (each equipped with 2 drilling heads, each 1.5 kW, and 11 drilling spindles each);
- 6 lower drilling units (each with 2 drilling heads, each 2.3 kW, and various drilling heads);
- 4 upper drilling units (each with 2 drilling heads, each 2.3 kW, and various drilling heads);
- 6 upper vertical workpiece clamps + 2 continuous screws for chip extraction
Iodju Tp Slepfx Afzstr
CNC control – PC DESK TOP (Module Editor) – Tooling System software
W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC
- 2 horizontal drilling units (each equipped with 2 drilling heads, each 1.5 kW, and 11 drilling spindles each);
- 6 lower drilling units (each with 2 drilling heads, each 2.3 kW, and various drilling heads);
- 3 upper drilling units (each with drilling heads, each 2.3 kW, and various drilling heads);
- 6 upper vertical workpiece clamps – 2 continuous screws for chip extraction
2nd drilling machine connected to the NC of the 1st machine.
Mēs atvieglojam Jums meklēšanu: "damatomacchine forum"
Jūs uzreiz un bez maksas saņemsiet jaunos piedāvājumus pa e-pastu.
Jūs jebkurā laikā varat viegli izbeigt meklēšanas uzdevumu.
Lietots Damatomacchine Forum (688)
Tagad pilnībā pārskatiet Machineseeker ar vairāk nekā 200 000 lietotām iekārtām.Pārlūkojiet populārākos iekārtu nosaukumus:

Uzziniet tagad
+44 20 806 810 84
+44 20 806 810 84
Ievietot sludinājumu tagad
*par sludinājumu/mēnesī

































































































































































