Damatomacchine Forum iegādāties lietotu (687)
Kārtot rezultātus
- Zemākā cena Augstākā cena
 - Jaunākie sludinājumi Senākie sludinājumi
 - Īsākais attālums Maksimālais attālums
 - Jaunākais ražošanas gads Vecākais ražošanas gads
 - Jaunākais atjauninājums Vecākais atjauninājums
 - Ražotāji no A līdz Z Ražotājs no Z līdz A
 - Atbilstība
 
- Zemākā cena
 - Cena
 
- Augstākā cena
 - Cena
 
- Jaunākie sludinājumi
 - Publicēšanas datums
 
- Senākie sludinājumi
 - Publicēšanas datums
 
- Īsākais attālums
 - Attālums
 
- Maksimālais attālums
 - Attālums
 
- Jaunākais ražošanas gads
 - Izgatavošanas gads
 
- Vecākais ražošanas gads
 - Izgatavošanas gads
 
- Jaunākais atjauninājums
 - Pēdējoreiz atjaunots
 
- Vecākais atjauninājums
 - Pēdējoreiz atjaunots
 
- Ražotāji no A līdz Z
 - Ražotājs
 
- Ražotājs no Z līdz A
 - Ražotājs
 
- Apzīmējums no A līdz Z
 - Apzīmējums
 
- Nosaukums no Z līdz A
 - Apzīmējums
 
- Modelis no A līdz Z
 - Modelis
 
- Modelis no Z līdz A
 - Modelis
 
- Zemākā atsauce
 - reference
 
- Augstākā atsauce
 - reference
 
- Īsākais darbības laiks
 - Darba laiks
 
- Garākā darbības ilgums
 - Darba laiks
 
- Atbilstība
 - Atbilstība
 
                mazā sludinājuma    
                Bitburg    
            1 419 km            
Pacelšanas galds ar pagriežamu maksimālo
R. BeckHS 300 Midi Schwenkmax
    Zvanīt
                Stāvoklis: jauns, Izgatavošanas gads: 2025, NIVEAU – Scissor Lift Table HS 300 midi incl. Swivelmax
Description:
> Mobile scissor lift table with platform base frame and 4 holes for accepting locking pins; 4 swivel castors, 2 of which have brakes; wheel diameter 125 mm; operated via foot pump.
Load capacity (kg): 300
Weight (kg): 85
Usable lift (mm): 610
Closed height (mm): 400
Total height (mm): 1010
Platform size (mm): 1200 x 740
Included! Swivelmax – panel tilting frame
Bjdpotgychofx Ag Islp
with 2-position locking (vertical/horizontal)
for sheet weights up to approx. 120 kg.
The tilting frame can be mounted to the platform base frame of the HS 300 midi in just a few steps.
Even large-format panels can be easily swiveled from vertical to horizontal position by one person, without any physical effort, thanks to this accessory.
Panel tilting frame size: 1800 x 1480 mm
Location: ex stock 54634 Bitburg
- immediately available -            
                mazā sludinājuma    
                Karben    
            1 278 km            
Vertikālās apstrādes centrs
DMGDMC 1035 V
    Zvanīt
                Stāvoklis: labi (lietots), Izgatavošanas gads: 2010, Funkcionalitāte: pilnībā funkcionāls, DMG DMC 1035 V
Year of manufacture: 2010
Control: Siemens 840 D Shop Mill
Power-on hours: 32,921 h
Program run time: 11,517 h
TECHNICAL DATA
Travel
X-axis (longitudinal): 1035 mm
Y-axis (transversal): 560 mm
Z-axis (vertical): 510 mm
Table working area: 1200 x 560 mm
4 T-slots: H12/100 mm
1 alignment slot: 14 H7 mm
Max. table load: 1,000 kg
Drive power (40/100% duty cycle): 13/9 kW
Torque (40/10% duty cycle): 83/57 Nm
Speed range: 20–10,000 rpm
Tool interface (DIN 69871-1): SK 40 A
Bsdpfx Aewwt Naog Iolp
Feed range (X, Y, Z): up to 20,000 mm/min
Rapid traverse (X, Y, Z): 25 m/min
Automatic tool changer with double gripper
Chain magazine
Magazine positions: 30
Max. tool diameter: 80/130 mm
Max. tool length: 300 mm
Max. tool weight: 6 kg
Operating voltage: 400 V/50 Hz
Total connected load: 25 kVA
Max. pre-fuse: 35 A
Machine dimensions (W x D x H): 2.52 x 2.5 x 2.6 m
Installation footprint: 6.9 x 5.4 m
Machine weight: 4,500 kg
EQUIPMENT / ACCESSORIES
- Chip and splash guard enclosure with sliding door, electrically interlocked and workspace lighting
- Automatic tool changer (double gripper/chain magazine) ATC 30
- Centralized lubrication system
- Spindle lubrication
- Heat exchanger (work spindle)
- Coolant filtration system, 600 L, 20 bar belt filter system
- Through-spindle coolant supply (internal coolant supply)
- Switchable from coolant to air blast
- Rinse gun
- Rotating inspection window
- Chip conveyor with coolant tank
- Infrared measuring probe TS 649
- Tool measurement system TT 140
- Electrical cabinet cooling
- 4-color signal light
- Leveling elements
- Documentation
Condition: Good, mainly used for aluminum machining            
                mazā sludinājuma    
                Schorfheide    
            830 km            
Siets/smalcinātājs
Sonstige/OtherGasparin GI118C Olimpo
    Zvanīt
                Stāvoklis: jauns, Izgatavošanas gads: 2025, iekārtas/transportlīdzekļa numurs: 997307957, Gasparin Jaw Crusher GI118C OLIMPO
Mobile jaw crusher on crawler tracks
The OLIMPO delivers impressive power thanks to its 1100x800 crusher, making it the ideal machine for professionals in quarrying and recycling applications.
This is a no-compromise machine, designed with a focus on application requirements, productivity, ease of maintenance, and transportability. Equipped with state-of-the-art control and operating systems, it is user-friendly, intuitive to operate, and environmentally friendly at the same time.
The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, ensuring maximum cost-efficiency in terms of maintenance and productivity, making it truly unrivaled.
Structural reinforcements between the frame and the crusher provide the machine with outstanding durability under stress. The unique design of the supporting structure ensures excellent access to all machine components during maintenance.
The OLIMPO crusher delivers convincing and unmatched performance, whether used for natural stone, recycling, or rental applications.
Production capacity: approx. 330 t/h
Patented HCS system
Proportional distributor with "Load Sensing" for optimized system efficiency and up to 30% fuel saving
Optional pre-screen available
Hydraulically adjustable crusher gap, also during crushing operation
Rapid wedge and hydraulic folding cylinder locking system
Discharge height: 3200 mm
Dust extraction
Fuel transfer pump
Magnetic separator
Warranty: 1 year or up to maximum operating hours from initial start-up
Technical data:
Bjdpfxshd Nabe Ag Ijlp
Jaw crusher: 1100 x 800 mm
Crusher gap: 50 to 200 mm
Feed hopper: 5 m³ - 2000 x 3970 mm, foldable for transport dimensions
Grizzly feeder: 970 x 3600 mm
Main conveyor: 1000 x 11,000 mm
4-cylinder diesel engine, constant speed, 82 HP / 60 kW, emission standard Stage V
Control panel
Crawler tracks: 450 x 3800 mm
Weight: kg
Transport length: 13,850 mm
Transport width: 2,550 mm
Transport height: 3,390 mm
Additional information:
Application: Construction
Overall condition: very good
Technical condition: very good
Visual condition: very good            

                Uzziniet tagad
+44 20 806 810 84
+44 20 806 810 84
                    Ievietot sludinājumu tagad                
                    *par sludinājumu/mēnesī                
                mazā sludinājuma    
                Haiger    
            1 270 km            
Mehāniskās apstrādes centrs
DMGDMU 35
    Zvanīt
                Stāvoklis: ļoti labs (lietots), Izgatavošanas gads: 2003, x-travel: 350 mm
y-travel: 240 mm
z-travel: 340 mm
Control: Siemens type 810 D
Total power requirement: 15 kW
Bedpfxeu Rdpis Ag Ielp
Machine weight: approx. 1.6 t
Space requirement: approx. m
Universal CNC tool milling machine
Type: DMU 35 M – 810 D
Working area:
X-axis (longitudinal travel of milling slide): 350 mm
Y-axis (cross travel of milling slide): 240 mm
Z-axis (vertical travel of table slide): 340 mm
C-axis – table rotation, manual: 360°
B-axis – table tilt, manual: +105° / -15°
Table surface (rounded): 280 x 400 mm
Table load capacity: approx. 100 kg
Tool holder: SK 40
Spindle speeds, infinitely programmable: 20 – 6,300 rpm
Feed rates / rapid traverse, infinitely variable: 20 – 5,000 mm/min
Feed drive / power: 1.6 Nm
AC main drive: approx. 10 kW
Total drive: approx. 15 kW – 400 V – 50 Hz
Weight: approx. 1,600 kg
Accessories / Special equipment:
• Siemens path control type 810 D (Processor 840 D) for interpolation in 3 axes with screen, electronic handwheel, swiveling control panel, SIEMENS ShopMill software (version 05.03.22) with additional DECKEL MAHO programming section for straightforward and fast shop floor programming.
• Manual tool change with SK 40 holder, pneumatic tool clamping
• Universal table, manually rotatable and tiltable via handwheels, with digital position display on the control screen (rotary encoder), allows 5-sided machining in a single setup
• Complete machine enclosure with 2 sliding doors; currently no coolant tank available as the machine was connected to a central system.
Operating manuals            
                mazā sludinājuma    
                Herrenberg    
            1 401 km            
Splashback
WiedenfeldWW 455 WK1
    Zvanīt
                Stāvoklis: labi (lietots), Izgatavošanas gads: 1984, darbības stundas: 2 500 h, Funkcionalitāte: pilnībā funkcionāls, tilpuma plūsma: 4,5 m³/h, ievades strāvas veids: trīsfāzu, kopējais augstums: 1 450 mm, kopējais svars: 110 kg, nepieciešamais platums: 800 mm, telpas prasība garums: 1 600 mm, Paint Mist Extraction System Wiedenfeld
Model: WW 455 WK1
Year of manufacture: 1984, in operation until 1992
Triple filtration: Wet-Dry-Fine
Machine Specifications:
Footprint approx.  Width: 1600 mm
Bedougu Ufspfx Ag Ielp
Depth: 800 mm (including 100 mm wall clearance)
Height: 850 mm + activated carbon filter 600 mm
Recirculation air filter ceiling  Width: 2000 mm
  Depth: 1350 mm
  Height: 220 mm
Exhaust and air deflector unit for supply/extract/mixed air included
Control cabinet
For further description and technical details, see images
Accessories:
Activated carbon filter: 600 x 600 x 600 mm
Filter mats
System fully functional
Condition: used but well-maintained            
Atklājiet vēl vairāk lietotu iekārtu
                mazā sludinājuma    
                Detmold    
            1 157 km            
Slīpzāģis
Elumatec
    Zvanīt
                Izgatavošanas gads: 2009, Stāvoklis: labi (lietots), Elumatec mitre saw, type: MGS 105, year: 2009, equipped with stop and measuring system Elumatec type: AMS 200
Serial no.: 1050126568
Swivel range manually 22.5° to the left and right, with digital display
Tilting range pneumatically from 90° to 45°
Saw blade diameter: 420 mm
Saw blade speed: 2,800 rpm
Power output: 4 kW
Electrical connection: 230/400 V, 3 Ph, 50 Hz
Compressed air connection: 7 bar
Air consumption: 20 l/min without spray, 32 l/min with spray
Dimensions (L x W x H): 1,400 x 1,500 x 1,880 mm
Weight: 750 kg
Stop and measuring system AMS 200
For precise cutting to length of aluminium profiles
Serial no: 1050126568
Length: 4,500 mm
Positioning accuracy: +/-0.1 mm per metre
Electrical connection: 230 V; 1 Ph 50/60 Hz
Pneumatic clamping in position
Bljdpfexn Umljx Ag Iep
Matrix display
5.7" with membrane keypad and handwheel for navigation in the operating menus
Memory for 1,000 data records
The memory can store set number, length dimension, profile number, angle position and quantity.
USB interface on the front
Roller conveyor
(Specifications subject to change and errors excepted; prior sale reserved)            
                mazā sludinājuma    
                Bitburg    
            1 419 km            
Kombinētā ēvelmašīna un biezumēvele
CasadeiPFS 520 - sofort verfügbar -
    Zvanīt
                Stāvoklis: jauns, Izgatavošanas gads: 2025, CASADEI PFS 520 – Thickness Planer and Jointer with 520 mm Planing Width and Motorized Thickness Table Adjustment
- Robust steel and cast iron construction
- Large, ribbed jointer tables made from cast iron, stress relieved to prevent deformation
- Smooth operation due to high own weight
- Four feed speeds
- Motorized thickness table adjustment with two speeds and digital readout
- Infeed sectional pressure shoes
- 4-knife cutterblock with precision bearings
- Helical steel infeed roller for especially smooth and gentle workpiece feed
- Outfeed roller with rubber coating
- Large jointer fence, tiltable 90°–45°, easily readable from the front
- Standard auxiliary fence included
- High-performance S6 industrial motor (P2)
Bsdpsbxz S Hefx Ag Islp
Tersa Cutterblock:
- Knife changes within seconds
- Upon machine start, centrifugal force automatically clamps the knives – self-locking
- The correct knife projection is automatically set without manual adjustment or screws
The jointer table is adjusted via a stable and precisely guided parallelogram system, ensuring the table nose remains equidistant to the cutterblock in all positions
The sturdy aluminium jointer fence comes anodized as standard, is easily adjustable, and provides a large support surface
- The adjustable tilt from 90° to 45° is easy to read from the operator's position
- Standard auxiliary fence for safely planing even narrow workpieces
Example shown with optional equipment
The dust extraction connection point remains in the same position for both jointer and thicknessing operations, eliminating the need for extra hoses or elaborate re-routing around the machine.
Technical Data:
Total jointer table length: 2300 mm
Infeed table length: 1180 mm
Planing width: 520 mm
Fence dimensions: 1200 x 190 mm
Fence tilt range: 90–45°
Min./Max. thickness height: 3/250 mm
Cutterblock diameter / number of knives: 100 mm / 4 pcs
Feed speeds: 5 / 8 / 12 / 18 m/min
Cutterblock speed: 5000 rpm
Motor power: 400 V / 50 Hz / S6
Extraction port diameter: 120 mm
Weight: 1020 kg
Top machine
Location: Bitburg – Available immediately            
                mazā sludinājuma    
                Hamm    
            1 232 km            
3D printeris
StratasysEden 500V Printer
    Zvanīt
                Stāvoklis: gatavs lietošanai (lietots), Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: 52181, Izgatavošanas gads: 2013, darbības stundas: 40 000 h, Stratasys 3D Printer.
Bljdpswna R Sjfx Ag Isp
Printer purchased in March 2013 (original price: €120,000). Maintenance has been carried out regularly by Stratasys. 
The machines are in top condition and fully functional. All print heads are included in the printer. 
Machines are ready for collection.            
                mazā sludinājuma    
                Schorfheide    
            830 km            
Riteņu iekrāvējs
AhlmannMecalac AX1000
    Zvanīt
                Stāvoklis: jauns, Izgatavošanas gads: 2025, darbības stundas: 1 h, iekārtas/transportlīdzekļa numurs: 153741826, MECALAC-AHLMANN AX1000 WHEELED LOADER
Pallet forks, rotating beacon, quick coupler
The professional wheel loader for heavy construction site operations impresses with its powerful Z-kinematics with dual lift cylinders. Precise parallel guidance, high breakout forces and fast work cycles are standard features.
In addition to axles lockable as required, the self-stabilizing articulated pendulum joint is another distinctive hallmark of the entire AX series. It serves to optimize driving characteristics and increase stability.
Operating weight: kg
Width: mm
Bucket capacity: 1.0 m³ (up to 1.60 m³ available)
Dumping height: mm
Rotating beacon, foldable
Grammer comfort seat
Radio system MP3, USB, Bluetooth
Rear working lights
Dumping throttle
Hydraulic couplings for 1st auxiliary circuit
Monoboom (Mecalac Single Arm Power) with hydraulic quick coupler
Powerful Z-kinematics
Mecalac Self Stabilizing Concept
Mecalac Panorama Cab with removable cab roof section
Performance-controlled, powerful hydrostatic drive
Planetary axles with 100% lockable differentials front and rear, engageable
Smooth joystick operation
Wide range of attachments
STANDARD EQUIPMENT:
ENGINE
Deutz TD L4 turbo diesel engine, water-cooled
Output: 55.4 kW / 75 hp
Max. torque: 260 Nm @ 1600 rpm
EU Emission Stage V
Electrical system: 12 V nominal voltage
DRIVELINE
Hydrostatic, power-regulated drive system, 2 speed ranges each with maximum pushing force, shiftable under load
Multifunction lever (joystick) for controlling the drive system and working hydraulics
Axles: Series planetary axles
Differential lock: push-button 100% lockable differentials on both axles
Tyres: 405/70 R18
Speeds:
Blodopiiwnopfx Ag Isp
Main range: 0–20 km/h
Work range: 0–7 km/h
Articulation: max. oscillation angle +/- 11°
BRAKING SYSTEM
Service brake:
1. Hydrostatic inching brake, effective on all 4 wheels
2. Hydraulically actuated disc brake at front axle, effective on all 4 wheels
Parking brake: Mechanically actuated parking brake, effective on all 4 wheels, with drive system cut-off
STEERING
Hydrostatic articulated steering
Max. steering angle: 2x40°
Turning radius over rear (PK): 3700 mm
HYDRAULIC SYSTEM
Single-circuit hydraulics with central gear pump (lift/lower, tilt, quick coupler) and steering (via priority valve), triple control valve with primary and secondary protection
Performance max. at 2300 rpm: 62 l/min, 250 bar
Cylinders: 2 lift cylinders / 1 tilt cylinder
PERFORMANCE DATA
Bucket position:
- Rollback angle: 47°
- Dump angle at top max.: 45°
Lifting force at ground level: daN
Breakout force: daN
Tractive force: daN
Tipping load:
- Standard bucket, straight: kg
- Standard bucket, articulated: kg
Payload on even ground
- On forks, straight: kg
- On forks, articulated: kg
Tipping load according to ISO 14397
Payload according to EN 474-3
CAPACITIES
Engine with filter approx. 8 L
Fuel tank approx. 87 L
Front axle total: approx. L
Rear axle total: approx. L
Hydraulic system incl. tank: approx. 60 L
STRUCTURE
Front-            
                mazā sludinājuma    
                Haiger    
            1 270 km            
Cilindriskā slīpmašīna
TschudinHTG-610 U660
    Zvanīt
                Stāvoklis: labi (lietots), Izgatavošanas gads: 1987, TSCHUDIN” TYPE HTG-610 U660
TSCHUDIN” TYPE HTG-610 U660 Cylindrical Grinding Machine, Year of Construction 1987, in Very Good Original Condition
The machine comes from the training workshop of a renowned German mechanical engineering company.
TECHNICAL DATA
MAIN DATA
Centre distance: 600 mm
Centre height: 100 mm
Total power requirement: 4-8 HP
MACHINE TABLE
Table travel max.: 620 mm
Table speed, stepless up to: 5 m/min
Reversal delay up to: 4 sec.
Clamping base swivel range: 7°
GRINDING SPINDLE HEADSTOCK
Wheel diameter: 300 mm
Wheel bore at 300 mm diameter: 127 mm
Motor power at 300 mm wheel diameter: 2.5 HP
WORKPIECE HEADSTOCK
Swivelling range: 360°
Spindle taper: Morse 4
Spindle speeds, stepless: 65-500 rpm
Motor power: 0.5 HP
TAILSTOCK
Internal taper of quill: Morse 3
Quill stroke: 20 mm
Bodpfx Agsw Iqr Sj Iolp
INTERNAL GRINDING ATTACHMENT
Spindle diameter max.: 80 mm
Motor power: 1.5 HP
COOLANT TANK: Capacity 100 l
Overall dimensions: 2160x1200x1350 mm
Weight: 2600 kg
About the Machine:
We offer a TSCHUDIN” TYPE HTG-610 U660 cylindrical grinding machine with automatic cycle, year of construction 1987, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Tschudin runs very quietly. Take the opportunity to inspect the machine under power on site and see the condition for yourself.
You can find further cylindrical grinding machines from renowned manufacturers on our website.            
                mazā sludinājuma    
                Grimhult    
            654 km            
Ūdens strūklas griešanas mašīna
Water Jet SwedenNC 4020 D
    Zvanīt
                Stāvoklis: ļoti labs (lietots), Izgatavošanas gads: 2009, Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: 95521, Water Jet Sweden NCP 4020 D
Year of manufacture: 2009
1.1 TECHNICAL DATA
1 x Waterjet cutting machine, NC 4020 D
1 x FANUC 310iA and 1 x IGEMS
2 x Fixed cutting heads for AWJ abrasive waterjet cutting
2 x SM3000 feed units
1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar
1 x Cooling unit - control cabinet
1 x Hose reel with spray nozzle
1 x Tool kit
1 x Machine zone safety guard
1 x PanelOne HMI interface "EDGECUT"
1 x Remote control for high-pressure pump
1 x Remote maintenance
2 x Diaphragm pumps and extraction units
1 x Waste container 1000 l
1 x Pressure tank 200 l and 1-ton abrasive online conveyor/online abrasive hopper
1 x Piercing drill unit
1 x MPG, portable manual operator unit
1.1.1 MACHINE DATA
Table size (W x D): 4200 x 2275 mm
- Cutting area (W x D): 3980 x 2010 mm
- X-axis travel 2D: 3530 mm
- Y-axis travel 2D: 2010 mm
- Z-axis travel: 250 mm
Bedpfow Snybex Ag Ielp
- Positioning accuracy (X/Y): +/- 0.050 mm/m
- Repeatability (X/Y): +/- 0.025 mm
- Rapid traverse X: 30,000 mm/min
- Rapid traverse Y: 15,000 mm/min
- Rapid traverse Z: 5,000 mm/min
- Minimum nozzle distance: 450 mm
- Maximum nozzle distance: 2010 mm
1.2 CONNECTION DATA
1.2.1 MACHINE CONNECTION
• Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz
• Pneumatic supply volume (incl. pressure vessel): 500 l/min
• Pneumatic supply pressure: min. 6.5 bar
1.2.2 HP PUMP DATA/CONNECTION
HP pump data: - KMT 50, Jetline, 4100 bar
- 37 kW, circuit breaker at 400/50 Hz, 80 A
CAD/CAM software: - IGEMS            
                mazā sludinājuma    
                Niederlangen    
            1 192 km            
Ekstrakcija
NOVUSAirtower FT 20.000
    Zvanīt
                Stāvoklis: jauns, 400 V / 50 Hz
 < 75 dB(A)
Drive power: 15 kW
Blsdpsppgd Eofx Ag Isp
Airflow rate: 20,000 m³/h
Weight: 1,590 kg
Modular Plug & Play Airtower
for welding fume extraction in halls, equipped with an integrated, soundproofed fan, automatic, differential pressure-controlled filter cleaning, system control with color display, pre-separation of particles, and IFA-certified filter cartridges. The system is designed for an average airflow rate of 20,000 m³/h.
1st Filter Stage – Main Filter:
Filter area: 222 m²
Number of filters: 6 units
Dust class according to DIN EN 60335-2-69: M
Separation efficiency: >99.9%
Cleaning: Jet Pulse
Compressed air connection: NW 7.2 mm, 4-6 bar, oil- and water-free
2nd Filter Stage – Fine Dust Filter:
Filter area: 65 m²
Filter class according to ISO 16890: ISO ePM1 80%
3rd Filter Stage – Synthetic Fiber Mats:
Filter area: 8 m²
Filter class according to ISO 16890: ISO coarse 60%
Total filter area: 295 m²
Dimensions:
Width of filter unit: 2,066 mm
Depth of filter unit: 1,756 mm
Height of filter unit: 3,643 mm
Dust container: 200 liters
Sanders version includes:
- NOVUS Efficiency Package FT20.000
- Timer
- NOVUS Particle Sensor            
                mazā sludinājuma    
                Bitburg    
            1 419 km            
Biezumēvele
MartinT45 - sofort verfügbar -
    Zvanīt
                Stāvoklis: jauns, Izgatavošanas gads: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock
Accessories: 7.5 kW
The T45 thickness planer offers the ideal conditions for modern manufacturing: it ensures cleanly planed surfaces, is quick and easy to operate, and is exceptionally quiet in operation. The standard electronic control allows you to save up to 99 planing thickness settings, making thickness height adjustments effortless so that your first workpiece already fits perfectly. Naturally, the thickness table can be moved by a simple push of a button or incrementally adjusted by 0.1 mm steps. The feed control elements are also conveniently positioned within reach. The heavy, vibration-damping composite frame combined with the high-quality bearing planer shaft ensures excellent surface finish. Thanks to its sound-absorbing construction, standard operation is already low-noise.
• Planing width: 630 mm
• Weight: approx. 1,200 – 1,400 kg
• Planing height: 2.8 – 300 mm
• Table length: 1,260 mm
• Minimum workpiece length: 270 mm
• Spindle speed: 5,000 rpm
• Operation: 1-axis control for thickness dimension, up to 99 values can be saved, 49 programmable as a free planing sequence; buttons for manual rapid and fine adjustment of the planing thickness with digital display, push buttons for cutterblock start and stop, integrated hour meter
• Cutterblock: TERSA solid steel 4-knife shaft Ø 125 mm; includes lock for easy knife change
• Thickness Table: Electric height adjustment with fine setting, table travel speed 10 mm/s, safely mounted on 4 support spindles, table surface finely planed
• Feed: 2 speeds 6 / 12 m/min, can be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thickness, gentle and self-cleaning rubber rollers, easy roller change; sectional pressure bar at infeed
• Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides on request); minimum extraction air volume: 27 m³/min at 20 m/s
• Maintenance: Central lubrication bar for oiling points; lubrication of bearings / cutterblock via nipples
• Accessories: 1 grease gun pre-filled with long-life grease
  1 oil gun
  1 open-end wrench
  1 tool for knife change
  1 pair of blind knives 640 mm
  2 pairs TERSA reversible knives 640 mm CV
• Emission values: Emitted sound pressure level at the workstation LpA according to DIN EN ISO 11202 [dB(A)]
No-load noise (without extraction) P1 65
No-load noise (with extraction) P1 77
Operating noise (without extraction) P2 65
Operating noise (with extraction) P2 78
Sound power level LWA according to DIN EN ISO 3746 [dB(A)]
No-load noise (without extraction) 84
Operating noise (with extraction) 90
Bledpsqlclbefx Ag Isp
Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1
Location: ex stock 54634 Bitburg
- immediately available -            
                mazā sludinājuma    
                Hamm    
            1 232 km            
3D printeris
StratasysEden 500V Printer
    Zvanīt
                Stāvoklis: gatavs lietošanai (lietots), Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: 52178, Izgatavošanas gads: 2013, darbības stundas: 40 000 h, Stratasys 3D printer. The printer was purchased in March 2013 (original price: €120,000). Maintenance has been carried out regularly by Stratasys. The machines are in excellent condition and fully functional. All print heads are installed in the printer. Machines are ready for collection.
Bedpfewna N Uox Ag Islp            
                mazā sludinājuma    
                Hessisch Lichtenau    
            1 157 km            
Gumija, papīrs un finierschēres (plānlauznis), kaudzes griešanas iekārta, kaudzes griezējs, plastmas
SCHNEIDERSenator 155
    Zvanīt
                Stāvoklis: lietots, Stack paper cutter, guillotine cutter, Schneider Senator 155
Rubber, paper and veneer shears, plastic shears, fabric shears
Rubber, paper and veneer shears
Machine no. 60178     Year of manufacture 1968
Cutting length: 1550 mm
Cutting height: approx. 125 mm
Feeding height: 140 mm
Back gauge max.: 1550 mm
Knife drive motor power: 5.5 kW
Bodpfxsdzqnys Ag Islp
Power supply: 380 Volt, 50 Hz
- Two-hand operation for stroke release
- Automatic clamping: presser holds the paper stack on the table
- Manual clamping and stroke release via foot switch (operational)
- Back gauge up to 1550 mm (manually adjustable via handwheel)
- Retrofitted electrical control system not functional (no wiring diagrams, no operating manual)
- Back gauge adjustment via servo motor (motor, controller, and control unit present, but non-functional)
- No light barriers (pictured light guards are no longer present)
Space requirements (L x W x H): 300 x 270 x 165 cm
Weight: 5100 kg
Good condition
Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber
Sales price excluding the 20 mm steel plate on which the machine is placed in the warehouse.            
                mazā sludinājuma    
                Haiger    
            1 270 km            
Frēzmašīna
KunzmannWF4/3
    Zvanīt
                Stāvoklis: ļoti labs (lietots), Izgatavošanas gads: 2002, Kunzmann WF4/3
Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2002, Excellent Condition
CE compliant!!
Technical Data:
- Year of manufacture: 2002
- Fixed angle table
- Spindle speed: stepless up to 4000 rpm
- Stepless feed on 3 axes from 0 to 2000 mm/min
- Travel X/Y/Z: 400 / 350 / 400 mm
- Rapid traverse x/y/z: 5 / 5 / 4 m/min
- Table size: 650 x 350 mm
- Table load: 250 kg
- Quill stroke vertical: 60 mm
- Vertical and horizontal quill - SK40
- Hydraulic clamping system
- Weight approx. 1700 kg
- Space requirement approx: 2.3 x 2 x 2 m
- Drive power: 12 KVA
Accessories and Equipment:
Bljdpew U Exyefx Ag Ijp
- Heidenhain TNC 124 Control
- Hydraulic clamping vertical and horizontal
- Automatic central lubrication system
- Spindle brake
- Technical documentation, spare parts lists, control manual, and programming examples
- Handwheels
- Coolant system
About the Machine:
For sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple, thanks to the tilting vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann under power at our premises.
You will find more milling machines from reputable manufacturers on our website.            
                mazā sludinājuma    
                Hebertshausen    
            1 301 km            
Maisīšanas un jaukšanas iekārta
REISCHLRMA 1000
    Zvanīt
                Stāvoklis: jauns, Izgatavošanas gads: 2025, Funkcionalitāte: pilnībā funkcionāls, kopējais augstums: 2 610 mm, kopējais garums: 1 650 mm, kopējais platums: 1 277 mm, sienas biezums: 2 mm, ieejas spriegums: 400 V, kopējais svars: 450 kg, nepieciešamais augstums: 2 850 mm, lietderīgā tvertnes ietilpība: 1 000 l, rotācijas ātrums (maks.): 1 450 apgr./min, REISCHL RMA 1000 – Smart Stainless Steel Brine Mixer with HMI, Emergency Operation & High-Performance Flow Cooling
Intelligent • Hygienic • Future-Proof
Technical Highlights – RMA 1000
Smart HMI Control: Intuitive user interface for rapid onboarding and secure operations.
Emergency Operation: In case the touch panel fails, all functions remain accessible via robust tactile switches – maximum operational reliability.
Process Data Acquisition & Reporting: Complete batch documentation and export functions.
Remote Support: Worldwide remote access enables fast assistance with zero downtime.
Bjdew T R Haepfx Ag Ijlp
Flexible Mixing System: Venturi principle for liquids and viscous solids (incl. flake ice).
Stainless Steel Centrifugal Pump: Reliable, durable, and hygienic.
Hygienic Design: Toggle locks, smooth surfaces, height-adjustable feet.
High-Performance Flow Cooling System: Cools 1,000 liters from 15°C to 0°C in 15 minutes – rapid & repeatable.
Options: Insulated cooling jacket, automatic flow measurement, brine residue recovery, various pump configurations.
Your Advantages
Greater Efficiency: Automated, repeatable mixing & cooling processes.
Operational Reliability: Thanks to emergency operation, production continues even in the event of panel failure.
Documented Quality: Quality assurance records at the push of a button.
Future-Proof: Modular expandability and software updates available.
Easy Integration: Perfectly matched to injectors & process lines.
👉 Price & further details upon request.
Contact us for your custom quote – we configure the RMA 1000 to perfectly suit your line.            
                mazā sludinājuma    
                Vācija    
            1 255 km            
Augstceltņu noliktava
NedconPicktower 4 geschossig
    Zvanīt
                Stāvoklis: ļoti labs (lietots), Izgatavošanas gads: 2017, Picktower, 4-storey shelf rack system, Nedcon, approx. 6,000 m² footprint = total approx. 24,000 m², Total: 502,816 bin locations for bins/cartons in 60x40 cm! - used -:
Price ex-works: only €250,000 (net), dismantled, packed, and loaded!
Price includes 2 goods lifts and 9 pallet transfer stations, including LED lighting with motion sensors, and two stairwells!
The installed conveyor technology is also available for purchase at an extra charge!
Manufacturer: Nedcon
Type: Picktower, 4-storey shelf rack system
Beam type: PR2
Year of manufacture: 2017
Number of bays:
22 bays at 60 cm deep x 4 levels = 88 bays
= 88 bays of 60 cm depth = across the levels: 3x5 tiers + 1x4 tiers = 19 tiers over 4 levels x 6 positions for 40 cm wide bins: 10,032
Depth: 1.20 m
324 x 4 = 1,296
220 x 4 = 880 bays
Total number of bays = 2,176 units at 1.20 m depth
= 2x 60 cm depth = across the levels: 3x5 tiers + 1x4 tiers = 19 tiers over 4 levels x 6 positions for 40 cm wide bins: 496,128 bin locations
Total: 502,816 bin locations for bins/cartons, 60x40 cm!
Load capacities:
Shelf load: 200 kg
Max. bay load: 1,000 kg
Max. mezzanine load: 350 kg (where racks are located)
Max. mezzanine load: 500 kg on the mezzanine surface
Floor heights - ground floor/1st floor/2nd floor (to underside of mezzanine bracing): approx. 3 m
3rd floor: approx. 2.26 m
Number of tiers: Ground floor approx. 4 per bay
1st/2nd/3rd floor: approx. 5 tiers per bay each
Overall height: approx. 11.87 m
Dimensions: approx. 68.43 m x 88.88 m = 6,082 m²
Rack/frame depth: approx. 1.20 m = 2 x 60 cm
Clear bay width: approx. 2.62 m = e.g. 6 positions for 40 cm wide bins per side!
The mesh decks have center push-through protection - so both sides can be used for 60 cm deep bins/cartons.
Basically, the system is designed like a pallet racking system - beams are hooked into the frames, with approx. 6 depth bars per tier between the beams.
Mesh decks are laid on the supports!
So, racks can be used as 2x 60 cm deep racks!
Racks can be accessed from both sides.
Width: Outer aisle: approx. 4.85 m, rack: approx. 29.80 m plus center aisle: 4 m, rack: approx. 29.78 m plus outer aisle: approx. 2.15 m = total approx. 68.43 m
At the front, one side is approx. 15.80 m wide - as mezzanine area! See plans!
Depth: Rack: approx. 83.58 m plus mezzanine in front approx. 5.30 m = total 88.88 m
Height: approx.
Aisle widths between the racks: 1.60 m
Aisle width in cross aisles (3 units): each 2.55 m
Chipboard: Dimensions mainly approx. 2 m x 1.59 m
Bljdpfjxhfvkox Ag Ijp
Frame width: approx. 8 cm
Bay depth: approx. 1.20 m, one row approx. 60 cm deep
Bay widths: approx. 2.62 m
Two mesh decks are installed per tier
Beam height: approx. 5 cm, top support depth: approx. 5 cm
Some bays with central mesh dividers - secured with cable ties.
Some with bin dividers
Existing sprinkler system will be scrapped - or available at extra cost!
Lift: 2 units over 4 levels
Manufacturer: Gebhardt
Type: Goods lift Conver 146, 146.03
Platform height: max. 2 m
Machine number: 2170139
Year of manufacture: 2017
Condition: good to very good
Availability: Dismantling starts mid-November 2025, available approx. mid-January 2026
Location: NRW (North Rhine-Westphalia)            
                mazā sludinājuma    
                Bitburg    
            1 419 km            
Grozāmā vārpstas frēzmašīna
MartinT 27 Flex
    Zvanīt
                Stāvoklis: jauns, Izgatavošanas gads: 2025, Martin Schwenkspindelfräse T 27 Flex – swivelable on both sides –
Flexibility for today and tomorrow.
Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control panel: thanks to integrated tool compensation, you can set up even complex moulding profiles with a tilted spindle in no time at all. This allows you to use the large swivelling range of 2 x 46° efficiently – enabling you to completely adapt to your specific requirements. Additionally, the machine can be tailored precisely to the individual needs of your operation.
Equipment:
T 27 Flex
T 2711-a Digital display for infeed jaw position integrated in the control
T 2731-a Table extension on both sides + pull-out workpiece support
T 2740-a Centrex guard
T 2742-a Integral fence including filler bar
T 2790-La Console for feed unit mounting, left side
The photo shows an example machine only / Feed unit not included
Bjdpfx Agor Hr D Ns Ielp
Location: Arriving soon in stock at 54634 Bitburg
- available in two weeks -            
                mazā sludinājuma    
                Hamm    
            1 232 km            
3D printeris
StratasysEden 500V Printer
    Zvanīt
                Stāvoklis: gatavs lietošanai (lietots), Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: 52177, Izgatavošanas gads: 2013, darbības stundas: 40 000 h, Stratasys 3D printer.
Printer purchased in March 2013 (original price: €120,000). Maintenance has been carried out regularly by Stratasys.
Blodpewna Nnsfx Ag Iop
The machines are in excellent condition and fully functional. All print heads are installed in the printer.
Machines are ready for collection.            
                mazā sludinājuma    
                Volkach    
            1 230 km            
2 Hohner cilpu šūšanas galvas 43/6S
HohnerMisc
    Zvanīt
                Stāvoklis: lietots, 2x Hohner 43/6S Ring Eyelet Stitching Heads, used
Bjdpow Ew Ayofx Ag Ielp
High-performance and precise stitching heads for professional brochure production, specifically designed for ring eyelet stitching.
Ring eyelet stitching is a special stitching method where the staples form a small loop or eyelet on the outside of the spine.
Key Features:
- Slim "S" variant for minimal staple spacing
- Compatible with various saddle stitching systems (e.g., Horizon, Duplo, Bourg)
- Fast, tool-free switching between standard and ring eyelet stitching
- High productivity with up to 14,000 stitches per hour
Technical Specifications:
- Minimum staple spacing: 48–54 mm (depending on current stitching thickness)
- Maximum stitching thickness: 3 mm (for 6 mm ring eyelets)
- Inner diameter of ring eyelet: 6 mm
- Stitching wire: round wire no. 24–26 (0.60–0.50 mm diameter)
- Staple back length: 12 mm
All-Inclusive Package
We take care of everything: from secure packaging to transport and customs clearance. On request, we can also provide a tailored leasing offer.
Sustainable and Economical
Choose a used machine and enjoy double benefits: protect the environment and your budget. Despite possible signs of previous use, you receive a quality product at an attractive price.            
Uzticamības zīme
Machineseeker sertificēti tirgotāji

                mazā sludinājuma    
                Haiger    
            1 270 km            
Vertikālās apstrādes centrs
DMGDMC 1035 V
    Zvanīt
                Stāvoklis: ļoti labs (lietots), Izgatavošanas gads: 2007, DMG DMC 1035 V
Machining Center DMG DMC 1035 V with Heidenhain iTNC 530 control, year of manufacture 2007, in excellent original condition.
The machine comes from the toolmaking department of a renowned German engineering company.
CE compliant!!
Technical Specifications:
  Year of manufacture: 2007
Technical Details
X-axis travel:     1,035 mm
Y-axis travel:     560 mm
Z-axis travel:     510 mm
Control system:     Heidenhain iTNC 530
Main spindle:
Speed range – main spindle:     20 – 8,000 rpm
Drive power – main spindle:     13 / 9 kW
Tool holder:     BT 40
Pull stud:     ISO 7388-3-A AD40
Worktable:
Clamping surface:     1,200 x 560 mm
Max. table load:     1,000 kg
Table height above floor:     720 mm
T-slots:     5 x 14 x 100
Tool changer:
Number of tool stations:     20 positions
Max. tool diameter:     80 mm
Max. tool diameter with free adjacent slot:  130 mm
Max. tool length:     300 mm
Max. tool weight:     6.0 kg
Tool change time:     1.6 sec
Chip-to-chip time:     7.0 sec
Rapid traverse / Feeds:
Feed rate:     24,000 mm/min
Rapid traverse:     30 m/min
Total power requirement:     20 kVA
Machine weight approx.:     4.5 t
Blsdpfx Ajxqgrxjg Iop
Space requirement approx.:     4.0 x 4.0 x 2.5 m
About the machine:
Offered is a DMG DMC 1035 V machining center with a Heidenhain iTNC 530 control. This machining center is in very good original condition. It comes from an operation where it was only used occasionally for training purposes. The control is very user-friendly. The guideways are regularly lubricated by the central lubrication system. The DMG DMC 1035 V has been mechanically and electrically inspected by us. You are welcome to view and test the DMG DMC 1035 V under power at our site.
You will find further milling machines from renowned manufacturers on our website.            
                mazā sludinājuma    
                Forst    
            1 369 km            
5 × 148 m³ alumīnija siloss ø 3 500 mm
Eichholz
    Zvanīt
                Izgatavošanas gads: 2007, Stāvoklis: lietots, Funkcionalitāte: pilnībā funkcionāls, 3 x 148 m³ Aluminium Silo (Plastic Granulate Silo)
Technical Data / Dimensions
Available units: 5
Year of manufacture: 2007
Volume: approx. 148,000 litres
Type of tank: Silo
Bedpfx Agjxqr Eke Iolp
Condition: used
Suitable for food: no
Design: upright
Internal diameter: approx. 3,500 mm
Cylindrical height: approx. 14,900 mm
Total height: approx. 17,500 mm
Weight: approx. 3,500 kg
Specific gravity of medium: 0.6 t/m³
Operating pressure: non-pressurised
Ground clearance: approx. 770 mm
Material / Specifications
Inner shell material: aluminium
Notes: Material: AlMg3 / AlMgSi3
Support structure: base ring / support frame
Top head type: conical top
Top slope: approx. 15%
Bottom head type: cone
Cone angle: 90 degrees
Top section:
1 x roof edge safety railing, height: 1,200 mm
1 x crossover walkway with railing
2 x lifting lugs
1 x manhole DN 600 with mounted vent nozzle
1 x flange connection for level measurement
1 x welded nozzle for level full sensor
1 x flange DN 100 (filling)
Shell:
1 x service door (approx. 1,800 x 850 mm)
1 x cable protection tube
1 x filling line DN 100, terminating in TW connection
1 x welded adapter for empty level sensor
Bottom section:
The silos taper at the bottom into a 90° cone with DN 200 flange and emergency shut-off slide, as well as a fitted extraction box.            
                mazā sludinājuma    
                Welver    
            1 229 km            
Vērpšanas mašīna
LEIFELDPLB 600
    Zvanīt
                Stāvoklis: pilnībā atjaunots (lietots), LEIFELD - PLB 600
- Gearbox with oil circulation lubrication
- Round blank counter-holder (optional)
Bledpfoupaa Tox Ag Iep
- Machining unit KA - behind the machine (optional)
Technical Data:
Max. blank diameter: 1,200 mm
Centre distance: 900 mm
Tool holder DIN 55027: Size 11
Transverse axis force (max.): 20 kN
Longitudinal axis force (max.): 30 kN
Transverse stroke: 360 mm
Longitudinal stroke: 750 mm
Max. transverse speed: 3.0 m/min
Max. longitudinal speed: 2.0 m/min
Ejector stroke: 400 mm
Tailstock stroke: 750 mm
Speeds (9 steps): 42-660 rpm
Main drive: 11 kW
Hydraulic drive: 7.5 kW
Operating voltage: 400 V
Frequency: 50 Hz
Connected load: approx. 20 kVA
Weight: approx. 6,000 kg
Additional services, machine accessories and spare parts available from us:
- Machine installation, commissioning and training
- Control system retrofitting (PLC + PNC/CNC) on existing machines
- Machine components
- Electrical, hydraulic and mechanical spare parts (for PNC, PLB and APED machines)
For further machines, information or enquiries, please do not hesitate to contact us!            
                mazā sludinājuma    
                Volkach    
            1 230 km            
Horizon Stitchliner 5500 | VAC-60Ha | VAC-60Hm | VAC-60Hm | VAC-60Hc | 19 miljoni
HorizonStitchliner 5500
    Zvanīt
                Stāvoklis: lietots, Horizon Stitchliner SL-5500
The Horizon Stitchliner 5500 is a powerful all-in-one solution for booklet production. 
It combines collating, creasing, folding, stitching, and three-side trimming in a single, efficient process. 
With its user-friendly operation, high productivity, and versatility, this system offers numerous advantages for printing houses, bookbinderies, and on-demand printing operations.
This Stitchliner 5500 includes the following components:
- VAC-60Ha, 2x VAC-60Hm and 1x VAC-60Hc collating towers
Key Features:
- 24 stations
- Inline production from collating to finished product
- Variable data processing: The system can handle personalized prints and varying page numbers, making it ideal for digital printing
- Fully automatic format settings for quick job changes
Bljdpfew Evb Ijx Ag Iop
- Touchscreen interface for user-friendly operation, even for less experienced operators
Specifications:
- Sheet formats: Max. 500 x 350 mm, Min. 148 x 120 mm
- Paper weight: 40-350 g/m²
- Processing thickness: 8-200 pages (max. 5 mm staple spine)
- Production speed: Up to 5,500 booklets/hour
- Stitching distance: 60-150 mm
Technical Details:
- Trimming (uncut): Max. 350 x 250 mm, Min. 140 x 103 mm
- Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm
- Power requirement: 400V / 50Hz
- Space requirements: Min. 5,709 x 3,240 mm
- Total weight: Approx. 2,500 kg
All-Inclusive Service Package
We take care of everything: from secure packaging and transport to customs clearance. Upon request, we can also provide you with a customized leasing offer.
Sustainable and economical
Choose a pre-owned machine and benefit doubly: conserve both the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.            
Mēs atvieglojam Jums meklēšanu: "damatomacchine forum"
 Jūs uzreiz un bez maksas saņemsiet jaunos piedāvājumus pa e-pastu.                        
 Jūs jebkurā laikā varat viegli izbeigt meklēšanas uzdevumu.                    
Lietots Damatomacchine Forum (687)
Tagad pilnībā pārskatiet Machineseeker ar vairāk nekā 200 000 lietotām iekārtām.Pārlūkojiet populārākos iekārtu nosaukumus:

                Uzziniet tagad
+44 20 806 810 84
+44 20 806 810 84
                    Ievietot sludinājumu tagad                
                    *par sludinājumu/mēnesī                



























































































































































































