Gala apstrādes iekārta

SINICO TR 60/4-650

Workpiece diameter - max. 40 mm
Workpiece diameter - min. 10 mm
Workpiece length 200 - 640 mm
Control system: PLC Siemens S5 95 U
Total power requirement: 25 kW
Machine weight approx. 5 t
Space requirement approx. 8.5 x 2.8 x 2.35 m
Hydraulic cut-off and double-ended machining unit suitable for the pre-processing of trapezoidal-thread spindles as well as other round workpieces. Operations include cutting from bar stock and simultaneous machining of both ends such as chamfering, face milling, and drilling with the workpiece stationary and rotating tools.

Machine configuration:
- Base machine model TR 60/4-650, workpiece length 640 mm
- Bar magazine for bar lengths 2 – 3.5 m
- Standard version for solid bars up to 40 mm diameter
- Central positioning of bar feed rollers
- Bar feed unit
- Standard type feed gripper
- Indexing turret with 4 clamping stations, model TR 300.00
- 4 base jaws, width 80/140 mm, diameter 75 mm
- Indexing turret swivels in both directions
- Sawing unit with worm drive TR 200.00, stroke 100 mm
- Saw blade 350 mm, speed 25/39 RPM
- Motor power 2.6/3.2 kW
- Motorized positioning of saw head
- Automatic positioning of saw stand with hydraulic clamping
- Saw blade guide
- Machining unit No. 1 - USP.00/M
- Speeds 842/1684 RPM, kW 3.3/4.0
- Working stroke 80 mm
- Rapid traverse 40 mm
- Spindle mounting ISA 40/M 16
- Timing belt drive
- Machining unit No. 2 - USP.00/M - UF
- Speeds 360/720 RPM, kW 1.8/2.8
- Working stroke 80 mm
- Rapid traverse 40 mm
- Spindle mounting ISA 40/M 16
- Timing belt drive
- Thread cutting attachment for right-hand and left-hand threads
- Machining unit No. 3 - USP.00/M
- Speeds 842/1684 RPM, kW 3.3/4.0
- Working stroke 80 mm
- Rapid traverse 40 mm
- Spindle mounting ISA 40/M 16
- Timing belt drive
- Machining unit No. 4 - USP.00/M
- Speeds 943/1882 RPM, kW 3.3/4.0
- Working stroke 80 mm
- Rapid traverse 40 mm
- Spindle mounting ISA 40/M 16
- Discharge chute
- Metric scales for all adjustment movements
- Hydraulic system with conveyor pump SAUER SUNDSTRAND
Caodpfxsvp Sd Ie Afrea
- Accumulator
- Rexroth flow regulator for machining units and saw
- Coolant unit with filter and tank
- Coolant pump CALPERA
- Electrical system in separate switch cabinet, control voltage 24V/50 Hz
- PLC SIEMENS S5 95 U
- Machine lamp
- Warning light for machine standstill
- Central lubrication
- Chip conveyor

In 2011, a comprehensive mechanical overhaul was conducted to optimize the positioning and centering accuracy at a cost of €25,000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced.

The machine has had very little use in recent years; the total operating hours are estimated by the seller to be approx. 24,000.

This is a used machine, therefore we sell with exclusion of any warranty.

STOCKING DEALER WITH 1,600 m² SHOWROOM.

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.