Kokmateriālu transportētājs

Fliegl TPS 118 Plateau 6,2m für Holz

The images shown are archive photos.

Further Information
Chassis Center Axle Trailer
Fine-grain steel welded construction
Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note: To attach the straps in combination with side walls, the side walls must be opened!
Gear support leg at the front
Folding rear support
2 wheel chocks with holders
Steel underrun protection, galvanized
Quarter shell mudguards
1 plastic toolbox with shelf, dimensions: w=620/h=360/d=440 mm, lockable with a padlock (padlock not included)
1 open storage compartment for insert stakes, located under the loading area
4 pairs of stake pockets integrated into the outer frame, 83 x 83 mm internal dimensions
4 stake pockets centered in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions
6 pairs of insertable stakes, B=80/ D=80/ L=2000 mm, hot-dip galvanized
Note: Stake pockets/insert stakes are not designed for securing long loads, pipes, etc. by themselves without additional lashing
Tandem trailer coupling
Drawbar with certified 40 mm towing eye
Drawbar mechanically adjustable in length 4 x 500 mm, from 1800 to 3800 mm, set to 1800 mm (Note: Observe load distribution and drawbar load)
Axles & Suspension
GFA axles with tapered roller bearings and S-cam brakes
Laser-measured axles/running gear to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance)
Wheels and Tires
235/75 R 17.5
Manufacturer’s choice
Steel rims, factory silver
Brake System
2-line air brake system
Spring-loaded parking brake
Integral air tanks
2 non-interchangeable trailer couplings at the front with connecting lines to the truck
ABS and ALB, with ABS plug at the front with connecting cable
Caution: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS!
Electrics
24 volts, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red outline marker lights at the rear
2 x 7-pin non-interchangeable plugs at the front with connecting cable
Floor
About 30 mm thick phenolic plywood, designed for high point loads
Note: Warping of the floor possible due to weather conditions!
Platform length approx. 6,200 mm
Operating Notes
The specified gross weight is technically feasible; depending on the type of cargo, the gross weight may not be achievable in compliance with permissible axle, support, and saddle loads.
Approval / Plates
Country of registration: Germany
With Dekra inspection and report
24/7 service hotline
Iedsi Ri H Dopfx Amijib
Prepared for single-line license plate holder
Contour marking with reflective strips according to ECE R 048, white on sides, red at rear
Paintwork
Frame color: DB 7350 Nova Grey

Attention: Archive photos!

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.