Ēvelēšanas un frēzēšanas mašīna

Casadei Matrix

Stāvoklis: ļoti labs (lietots), Izgatavošanas gads: 2002, Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: 02-84-022, jauda: 37 kW (50,31 zs), 4-sided planing and moulding machine, 4 tool holders + universal spindle, 2.50 m table & reinforced motors Brand: CASADEI Model: MATRIX 4+1 Serial No.: 02-84-022 Year: 2002 WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm - Four-sided planer and moulder - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Max. finished wood section: 155 x 230 mm - Minimum working length: 480 mm - Adjustable cutting depth max 10 mm - Spindle speed: 6000 rpm COMPOSITION OF THE MACHINE: - Heavy-duty welded frame - Panoramic, soundproofing hood with gas springs - Raised control panel, operator side - 2500 x 250 mm steel infeed table Floor height: 880 mm Spring-loaded side infeed pressure device Manual table lubrication unit after jointer 1) Bottom horizontal spindle 5.5 kW TERSA cutterhead Ø 125 x h.240 mm 1 retractable vertical roller pressure 2 & 3) Vertical spindles, right then left 1 x 7.5 kW TERSA cutterhead Ø 125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø 125 x h.240 mm - Adjustable exit pressure shoe 5) Universal spindle 7.5 kW Ø 40 x 255 mm 1 retractable horizontal roller pressure FEED SYSTEM: - Feed with inverter: 5 to 25 m/min Feed motor: 1.1 kW (1.5 hp) - 8 independent feed rollers with pneumatic pressure: 2+2 grooved steel, then 2+2 rubber-coated OTHER FEATURES: - CE marking - Main power supply: 380V, 3-phase, 50 Hz - Lockable switch, automatic star-delta start Emergency stop push-buttons front/rear - Installed power: 37 kW (50 hp) IN 62A - Motors with brakes - Cardan spindle drive - Digital position indicators (Siko type counters) for precise manual adjustment per operation - Electrically powered up/down beam for thickness adjustment Lift motor: 0.37 kW - Axial spindle adjustment: Lower horizontal: 0 to 15 mm Upper horizontal: 0 to 25 mm Vertical spindles: 0 to 25 mm - Acceptable tool sizes: Bottom horizontal: Ø 120 to 140 mm For profiling on vertical spindles: Ø 100 to 180 mm For profiling on top horizontal: Ø 100 to 180 mm End surfacing cutter: Ø140x12x40 mm - Recommended pneumatic supply: 7 bar Cedpfx Afeu Sr Iverehf Working pressure: 6 bar Average air consumption: 0.85 Nl/cycle Connection: 1/2" G - Dust extraction, centralised top port: Ø 250 mm Required air speed: min. 25 m/sec Flow rate: 4500 m3/h - Technical manual included. - Machine equipped with 4 TERSA spindles Footprint: 4700 x 1700 x h.1800 mm Weight: 2240 kg Feel free to contact us for supply of consumables, accessories and/or extraction systems.