Frēze

Casadei MATRIX 4+1

4-sided planing and moulding machine, 4 tool holders + universal spindle, 2.50 m table & reinforced motors
Brand: CASADEI Model: MATRIX 4+1
Serial No.: 02-84-022 Year: 2002

WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm
- Four-sided planer and moulder
- Working width: 25 to 230 mm
- Working height (wood thickness): 6 to 155 mm
- Max. finished wood section: 155 x 230 mm
- Minimum working length: 480 mm
- Adjustable cutting depth max 10 mm
- Spindle speed: 6000 rpm
Lhedpfxeu Sr Ive Agvjk

COMPOSITION OF THE MACHINE:
- Heavy-duty welded frame
- Panoramic, soundproofing hood with gas springs
- Raised control panel, operator side
- 2500 x 250 mm steel infeed table
Floor height: 880 mm
Spring-loaded side infeed pressure device
Manual table lubrication unit after jointer
1) Bottom horizontal spindle 5.5 kW
TERSA cutterhead Ø 125 x h.240 mm
1 retractable vertical roller pressure
2 & 3) Vertical spindles, right then left 1 x 7.5 kW
TERSA cutterhead Ø 125 x h.165 mm
4) Top horizontal spindle 7.5 kW
TERSA cutterhead Ø 125 x h.240 mm
- Adjustable exit pressure shoe
5) Universal spindle 7.5 kW
Ø 40 x 255 mm
1 retractable horizontal roller pressure

FEED SYSTEM:
- Feed with inverter: 5 to 25 m/min
Feed motor: 1.1 kW (1.5 hp)
- 8 independent feed rollers with pneumatic pressure:
2+2 grooved steel, then 2+2 rubber-coated

OTHER FEATURES:
- CE marking
- Main power supply: 380V, 3-phase, 50 Hz
- Lockable switch, automatic star-delta start
Emergency stop push-buttons front/rear
- Installed power: 37 kW (50 hp) IN 62A
- Motors with brakes
- Cardan spindle drive
- Digital position indicators (Siko type counters) for precise manual adjustment per operation
- Electrically powered up/down beam for thickness adjustment
Lift motor: 0.37 kW
- Axial spindle adjustment:
Lower horizontal: 0 to 15 mm
Upper horizontal: 0 to 25 mm
Vertical spindles: 0 to 25 mm
- Acceptable tool sizes:
Bottom horizontal: Ø 120 to 140 mm
For profiling on vertical spindles: Ø 100 to 180 mm
For profiling on top horizontal: Ø 100 to 180 mm
End surfacing cutter: Ø140x12x40 mm
- Recommended pneumatic supply: 7 bar
Working pressure: 6 bar
Average air consumption: 0.85 Nl/cycle
Connection: 1/2" G
- Dust extraction, centralised top port: Ø 250 mm
Required air speed: min. 25 m/sec Flow rate: 4500 m3/h
- Technical manual included.
- Machine equipped with 4 TERSA spindles
Footprint: 4700 x 1700 x h.1800 mm
Weight: 2240 kg
Feel free to contact us for supply of consumables, accessories and/or extraction systems.

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.