Continuous flow pasteurizerAKUINO
StarterPRO
Pamatdati
- Iekārtas apzīmējums:
- Continuous flow pasteurizer
- Ražotājs:
- AKUINO
- Modelis:
- StarterPRO
- Iekārtas numurs:
- PSP-26001
- Ražošanas gads:
- 2026
- Stāvoklis:
- jauns
- Funkcionalitāte:
- pilnībā funkcionāls
Cena un atrašanās vieta
- Atrašanās vieta:
- rue des Vignes 4 / 105, 1435 Mont-Saint-Guibert, Belgique
Tehniskā informācija
Izmēri un svars
Jaudas informācija
Dokumentācija un sertifikācija
Sīkāka informācija
Piedāvājuma informācija
- Sludinājuma ID:
- A22207777
- Atjaunināšana:
- pēdējo reizi 25.06.2026
Apraksts
• Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours.
• Base of 50x50cm, 200cm high. Removable side guards.
• Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station.
• A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation.
• Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process.
• No contact with air: Hygienic and precise processing!
Bwedezg Dlbopfx Afajw
• Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C).
• The basic pasteurizer consists of:
1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C),
2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates,
3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature,
4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot,
5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time),
6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product.
2. Transfer pump with controls:
• Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor.
• Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops.
• Performance between 8 and 25 liters per minute (depending on the height difference).
• Also ensures powerful cleaning of the entire pasteurization circuit.
• Food-grade design and materials.
• Electrical consumption of 400 W.
• Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content.
3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Dokumenti
Piegādātājs
Reģistrēts kopš: 2022
1 Sludinājums tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
Fumane (Verona) 
Menslage CimecDruckfüller
Freising CNZH Technology
Menslage Leibinger 12-1Druckfüller
Freising Borelli
Freising Krones
Solingen BrinoxLEP12 CS6720 Paket 2
Menslage MarrodánTunnelpasteur
Rauhenebrach KronesMecafill
Overdinkel Cask3 Head Fill Station
Machineseeker-uzticamības zīmogs
Kas ir uzticības zīme?
Machineseeker sertificē atlasītos tirgotājus ar uzticības zīmi Machineseeker. Pirms piešķiršanas pieredzējuši Machineseeker darbinieki veic standartizētu un pamatīgu pārbaudi.
Ko mēs pārbaudām?
Komersanta apliecības vai Izraksta no Komercreģistra pārbaude
Pārbaude tirgotāja
pasta adreses
Bankas konta informācijas apstiprināšana
Galvenā tālruņa numura
telefoniskās
sasniedzamības pārbaude
Komerciālā izziņa
nedrīkst saturēt negatīvas pazīmes
Pircēju sūdzības
var novest pie sertifikāta atņemšanas.Ko tas nozīmē jums kā pircējam?
Izmantojot Machineseeker uzticamības zīmogu, kā pircējs varēsiet atpazīt uzticamus tirgotājus bez pašam veikt pārbaudi, kuri, visticamāk, veic godīgu un tiesisku uzņēmējdarbību.
Protams, pirkšanas procesā tomēr var rasties domstarpības. Machineseeker nav atbildīgs par tiesību aktu pārkāpumiem, ko izdara aktīvie pircēji vai pārdevēji vietnē Machineseeker.