CNC virpošanas, urbšanas un frēzēšanas centrs

WFL M120X MILLTURN 3000mm

WFL Millturn M120X/3000

WORKING RANGE
Centre distance = 3000 mm
Swing diameter over bed = 1220 mm
Swing diameter over cross slide = 1140 mm
Longitudinal travel (Z) = 3330 mm
Cross travel (X) = 920 mm
Distance from spindle nose to tailstock centre = 3812 mm

TURNING SPINDLE
Spindle nose DIN 55026 type A15
Spindle bore 165 mm

MAIN DRIVE
AC drive with 2-speed gearbox
Drive power 100% duty cycle: 60 kW
Max. spindle speed 1600 rpm
Max. spindle torque at 100% duty cycle: 4472 Nm

C-AXIS. SERVO-CONTROLLED MAIN SPINDLE
Smallest programmable increment: 0.001°
Max. speed: 20 rpm
Bsdpol Smhlefx Abzjld
Max. spindle torque at 100% duty cycle: 3000 Nm
Holding torque of disc brake: 6000 Nm

FEED DRIVE
Cross slide, turning-milling-drilling unit:
AC servo drive
Feed force longitudinal (Z): 30.0 kN
Feed force cross (X): 31.5 kN
Feed force Y-axis (55 kW): 25.0 kN
Rapid traverse speed: longitudinal (Z): 15.0 m/min
cross (X): 15.0 m/min
Y-axis: 12.5 m/min
Rapid B-axis swivel: 90°/s

BALL SCREW
LONGITUDINAL (Z-axis) ø x pitch: 63x20 mm
CROSS (X-axis) ø x pitch: 63x10 mm

TAILSTOCK
Quill diameter: 180 mm
Quill stroke: 200 mm
Quill force (adjustable): 5400–40000 N
Quill with integrated bearing: Morse taper 6

TOOL CARRIER (Single tool carrier, turning-milling-drilling unit)
AC drive, drive power 100% duty cycle: 55 kW
Max. spindle speed: 3200 rpm
Max. spindle torque at 100% duty cycle: 730 Nm
Travel perpendicular to X/Z plane (Y-axis, 55 kW): 650 mm (-300/+350)
Swivel range of milling spindle (B-axis): -110°/+90°
Spindle interface for tools DIN 69893 HSK-A100
Milling spindle diameter at front bearing: 130 mm

TEMPERATURE STABILIZATION
By regulated cooling circuit with compressor – cooling unit

EXTERNAL TOOL MAGAZINE: Number
Storage locations (position coded), HSK100 size: 90
Max. tool length: 500 (800) mm
Max. tool weight
(Balance point 25 kg, with contact surface max. 250 mm)

DIMENSIONS
Length (max., with tool magazine and chip conveyor): 13 m
Height: 4.1 m

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.