Klimata pārbaudes skapis ar sēdekļa pulsatoru

Weiss SD 1400/+20 DU

WEISS climatic test chamber with seat pulser

Manufacturer: Weiss

Model: SD 1400/+20 DU

Test Chamber:
Material: Stainless steel
Dimensions:
Height approx. 800 mm
Width approx. 2000 mm
Depth approx. 900 mm
Capacity: 1,440 liters

External Housing:
Material: double-coated Zincor sheet
Dimensions:
Height approx. 2,000 mm
Width approx. 2,200 mm
Depth approx. 2,000 mm
HxWxD: 2000 x 2200 x 2000 mm
Finish: light grey (RAL 9002)
Door, double-leaf: hinged left and right

Equipment:
Feedthroughs in floor and ceiling: 2 each, NW 100 mm, for inserting the pulsation tables
Feedthroughs in side walls: 1 each, left/right, 100 mm
Refrigeration unit: air-cooled
Control system: Digital measuring and control system DMR
Basic operating panel: integrated in main control panel
Interface: RS 232 C, for PC connection
Software: Operating software for MS-Windows

Performance Data:
Temperature range without climatic function: +20...+100 °C
Temperature constancy without climatic function: +0.2 ... +0.5 K (over time), depending on range, at steady-state
Temperature range with climatic function: +20...+95 °C
Temperature constancy with climatic function: +0.2 ... +0.5 K (over time), depending on range, at steady-state
Dew point range: +20...+94 °C
Ppodpfjxbgrgsx Am Aor
Humidity range: 10...98 % r.H.
Humidity constancy: +3 ... +5 % r.H. depending on range, at steady-state
Temperature change rate measured at air outlet without specimen and without load:
- Cooling: 0.5 K/min on average, between +100 and +20 °C
- Heating: 0.5 K/min on average, between +20 and +100 °C
Performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage
Proper operation requires an ambient temperature between +10 and +35 °C

Seat test device with steel frame for mounting and fastening on climatic test chamber, incl.:

• 2 pneumatic weight-lifting devices (150 mm stroke) for test specimen change, 12 weights of 5 kg each
• 1 base frame in standard steel welded construction for fastening to the underside of the climatic test chamber. The frame is fitted on all sides with removable panels and has two hinged doors for adjusting the eccentricity. These doors are equipped with safety switches.
• 2 eccentric disks with bearings and tachometer • 2 connecting rods • 2 linear ball-bushings
• 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting test specimens, made of aluminum, thickness min. 10 mm
• 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting seat form simulators
• 2 load rods Ø 60 mm made of stainless steel (connection to the test specimen is not included in our price, but can be offered separately upon precise definition)
• 2 three-phase motors • 2 belt drives with tensioning devices
• 1 pneumatic control system with 2 manual valves, a filter-regulator unit and a shut-off valve • 1 electrical control cabinet with 2 SEW frequency converters, hand switch, emergency stop button, 2 start buttons, 2 stop buttons, 2 speed displays, 2 potentiometers for speed adjustment, 2 pre-selectable cycle counters with zero-reset and shut-off

Technical Data:
Frequency: 100-1000 cycles/minute
Load: 2 x 45 kg
Stroke: 0 - 40 mm
Downward load: 450 N each

Financing through our bank is available.
komplett-konzept.leasingo.de

For more products - new and used - please visit our shop!
International shipping costs on request!

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.