Virpa, virpas piederumi

Weiler Primus

Stāvoklis: ļoti labs (lietots), WEILER PRIMUS tips MD-G - Centru augstums: 125 mm - Attālums starp centriem: 400 mm - Apgriezienu diapazons: 40–3000 apgr./min - Vārpstas caurums: 24 mm - Elektriskā patronas aizsardzība - Multifix ar ieliktņiem - Aizmugures balsts ar urbšanas spoli - Četru žokļu patrona - Darba apgaismojums - Gultas apstādinātājs - Dokumentācija Izmēri: Laodpoxw H Dbjfx Aamoi G x P x A: 1,3 x 0,8 x 1,6 metri / Svars: 450 kg Iespējamas kļūdas vai ievades neprecizitātes.

Stāvoklis: ļoti labs (lietots), Funkcionalitāte: pilnībā funkcionāls, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock quill: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Laodeu Aftgopfx Aamoi Accessories and Features: >> 1 piece 160 mm three-jaw chuck with 1 set of jaws >> 1 piece new 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Weiler also runs quietly even at high speeds. The Primus was previously used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Stāvoklis: lietots, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3,000 rpm, 18 steps Feed: longitudinal and face Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Mains connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 tool cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centring point for collet holder - Emergency stop - Hinged chuck guard - Splash guard wall - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space L x W x H 1200 x 900 x 1560 mm Weight 520 kg Lsdsrtd Uwepfx Aamoai Good condition

Stāvoklis: gatavs lietošanai (lietots), Izgatavošanas gads: 1989, Funkcionalitāte: pilnībā funkcionāls, Pārdošanā Weiler zīmola virpa, modelis Primus LZ-GS Ljdpfx Aaeihig Ijmjai Iekārta atrodas ļoti labā stāvoklī. Tehniskie dati: Ražošanas gads: 1989 Iekārtas Nr.: 4443 Darbības spriegums: 380 V Centra augstums: 120 mm Centru attālums: 430 mm Apgriezienu skaits: 60–3000 apgr./min (18 pārnesumu pakāpēs) Vārpstas caurums: 23 mm Īsā koniskā vārpstas galva DIN 55027 Atslēgas uzgalis: MK 2 Paņēmieni: no 0,03 līdz 0,15 mm/apgriezienā Iespējamās vītnes: metriskās, collu, moduļa un diametrālās (Diametral Pitch) Metriskas vītnes solis: 0,25 līdz 2,5 mm Izmēri: garums 1,2 m, augstums 1,3 m, dziļums 0,65 m Cena norādīta bez PVN Apskate iespējama pēc iepriekšējas vienošanās. Sazinieties ar mums – mūsu komanda labprāt sniegs Jums atbalstu. Ir iespējama maiņa vai esošas tehnikas pieņemšana kā daļu no maksājuma! Iekārtu pirkšana/pārdošana METĀLAPSTRĀDES un RAŽOŠANAS IEKĀRTU PIRKŠANA / PĀRDOŠANA u.c. Vai Jums nepieciešama kvalitatīva, taču pieejama metālapstrādes iekārta savai ražotnei? Vai arī vēlaties pārdot savu? Papildu informācija un saziņas iespējas atrodas mūsu mājaslapā.

Stāvoklis: labi (lietots), Izgatavošanas gads: 2000, Weiler Primus VC, 2000. gada izlaidums, digitālais displejs, starp uzgaļiem – 500 mm, maksimālais virpošanas diametrs pār suportu – 150 mm, vārpstas apgriezieni līdz 4 000 apgr./min, vārpstas caurums – 40 mm, vārpstas piedziņa – 1,5 kW, Multifix tērauda turētājs, 24 garenvadīšanas padeves, metriskā vītne, collu vītne. Laedjv Ifxispfx Aamsi

Stāvoklis: ļoti labs (lietots), Funkcionalitāte: pilnībā funkcionāls, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: Laedpfjvtp Edex Aamei - Year of manufacture: approx. 1985 - Machine No.: 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speeds: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: - 1 piece 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck system with 18 collets - Multifix size A quick-change toolpost with 3 tool holders - Stop - Electrical spindle guard About the machine: Offered for sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is extremely user-friendly and surfaces can be finished to a ground-like quality. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stāvoklis: ļoti labs (lietots), Funkcionalitāte: pilnībā funkcionāls, Weiler Primus GS Lead and Feed Screw Lathe in Very Good Original Condition!!! Technical Data: >> Year of manufacture: approx. 1992 Machine No. 4549 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared stages >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch possible >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> Collet chucking system new, collets new from 3 to 25 mm >> 1 three-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders About the Machine: Laodpfxjwkh Abs Aamji For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs very quietly, even at high speeds. The Primus was previously used in a training workshop. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing surface finishes comparable to grinding. Take the opportunity to view and test this machine under power on site and see the condition for yourself.

Stāvoklis: ļoti labs (lietots), Funkcionalitāte: pilnībā funkcionāls, Weiler Primus GS vadības un vilces vārpstas virpa ar 3 asu ciparu indikatoru Easson-ES8 no apmācību darbnīcas. Lieliska stāvoklī! Tehniskie dati: >> Izgatavošanas gads: apm. 1990, mašīnas Nr. 3768 >> Maksimālais apstrādes augstums: 120 mm >> Starpcentru attālums: 430 mm >> Apgriezieni: 60–3000 apgr./min, 18 pārnesumu pakāpēs >> Vārpstas caurums: 23 mm >> Īsā konusa vārpstas gals DIN 4 >> Aizmugures centrs: MK 2 >> Gājiena padeve: 0,03 līdz 0,15 mm/apgr. Lodpfx Asvkfhpeamjai >> Iespējamie vītņu veidi: metriskās, collas, moduļa un diametrāl-pitch vītnes >> Metrisko vītņu soli: 0,25 līdz 2,5 mm >> Svars: apm. 360 kg >> Izmēri: garums – 1,2 m, augstums – 1,3 m, dziļums – 0,65 m Piederumi un aprīkojums: >> 3 asu ciparu indikācijas sistēma Easson ES8 >> Spīļbukses ierīce no 1 līdz 20 mm ar attiecīgām spīļbuksem pa 1 mm pieaugumā, komplektā ar uzgriežņa cauruli >> 1 gab. trīszobu patrona ar 2 žokļu komplektiem >> 1 gab. četrzobu patrona ar 2 žokļu komplektiem >> Multifiks A izmēra ar 3 instrumentu turētājiem >> Gultas uzstutne >> Griešanas stiprinājums Par iekārtu: Tiek piedāvāta Weiler Primus vadības un vilces vārpstas virpa, ražota ap 1990. gadu, izcilā stāvoklī. Iekārta pilnībā darba kārtībā. Slēdes kustās ļoti viegli un vienmērīgi, gultņu vadotnes – lieliskā stāvoklī. Arī pie augstiem apgriezieniem darbība ir klusa. Virpa nākusi no liela uzņēmuma apmācību darbnīcas. Šī jaunākās paaudzes Weiler virpa ir ļoti lietotājam draudzīga, ar to iespējams panākt virsmas apstrādi līdz gravēta līmenim. Ir iespēja apskatīt un izmēģināt virpu uz vietas zem sprieguma, lai pārliecinātos par tās stāvokli.

Stāvoklis: ļoti labs (lietots), Funkcionalitāte: pilnībā funkcionāls, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose, DIN 4 >> Tailstock Taper: MK 2 >> Feeds: 0.03 to 0.15 mm/rev Laedpfevivmyox Aamji >> Thread Cutting Options: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 2.5 mm >> Switchable Spindle Brake >> Weight: approx. 360 kg >> Dimensions: 1.2 m (L), 1.3 m (H), 0.65 m (D) Accessories and Equipment: >> 1 piece 3-jaw chuck, NEW, 125 mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> Collet setting, NEW, with collets from 3 to 26 mm, increments of 1 mm, NEW About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. Naturally, the machine is fully functional. All slides operate smoothly and evenly. The bedways are in very good condition. The Primus was previously used in a training workshop. This newer generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stāvoklis: ļoti labs (lietots), Izgatavošanas gads: 2003, Funkcionalitāte: pilnībā funkcionāls, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C NEW, featuring VC drive, infinitely variable spindle speed, and CE approval – in very good condition. Technical Data: Ljdpew Idllofx Aamsai >> Year of manufacture: 2003 Machine No.: 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake switchable >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the Machine: For sale is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. This is a very attractive lathe with VC drive, offering stepless speed control of the work spindle. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and enables the production of surfaces comparable to grinding. The K&C digital readout further facilitates precise and easy operation. You are welcome to inspect the machine under power on site to convince yourself of its condition.