Atkritumu blietētājs, presētājs, atkritumu presētājs

Orwak Compactor 3110

Stāvoklis: jauns, GALVENĀS IEZĪMES: - Viengalvas urbjmašīna urbumiem diapazonā no 0° līdz 90° - Galvas leņķa pneimatiska regulēšana - Čuguna lineāli - Vārpstas ar ātrās savienošanas savienotājiem - Patentēti pneimatiskie materiāla skavas - Čuguna darba galds - Ātra un precīza regulācija - Precīza urbšana STANDARTA APARĀTA APRĪKOJUMS: - 2 alumīnija lineāli 1,5 m (labā un kreisā puse) ar diviem atduriem - 5 ātrās stiprināšanas turētāji Tehniskie dati: Itedpfep Ecdgex Amieg Vārpstu skaits: 21 Attālums starp pirmo un pēdējo urbi: 640 mm Pneimatisko skavu daudzums: 2 Attālums starp vārpstu asīm: 32 mm Maks. urbšanas dziļums: 65 mm Gaisa patēriņš: 10 l/cikls Maks. apstrādājamā detaļas izmērs: 915 x 3000 mm Maks. detaļas biezums: 70 mm Darba spiediens: 6 - 7 bar Apgriezieni: 2800 apgr./min Dzinēja jauda: 1,5 kW Trokšņa līmenis: 76,1 dB Kopējie izmēri: Garums: 1030 mm Platums: 1030 mm Augstums: 1285 mm

Stāvoklis: lietots, Ražošanas gads: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-unclamping, with electric single-cycle mode. Iedpfx Asxnlflsmistg - Automatic retraction of the drilling unit upon reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This eliminates the need to adjust the drilling depth when switching from flat-side to end-face drilling (+10 mm e.g., with a dowel length of 35 mm, flat-side drill depth 14 mm, end-face drill depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drill feed 0–70 mm). Includes 21 quick-change chucks (Ganner System) for easy drill bit exchange. - Easy swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping carrier, adjustable along the Y-axis, with 3 pneumatic clamping cylinders for workpieces up to max. 80 mm in height. Ideal stop system consisting of: - 1 stop ruler, 1800 mm, for drilling shelf panels (aluminum profile 40×40 mm) with 3 drop stops. - With quick-change system, easily adjustable from right to left side for mirrored shelf panel drilling in carcass construction; also suitable for line boring in System 32. - Side stops and position adjustments, as well as drill height positioning, via worktable with mechanical digital counters. - Side stops can be easily swung away for the quickest conversion from carcass to frame and line boring operations. - Clamping arms for clamping carrier suitable for line boring positions up to 300 mm max. - Ideal three-stage tooling system. Set of dowel bits included: - 5 carbide dowel drills, Ø 8×77 mm, right-handed - 4 carbide dowel drills, Ø 8×77 mm, left-handed Base machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-unclamping, with electric single-cycle mode. - Automatic retraction of the drilling unit upon reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling, eliminating the need for adjustment when switching from flat-side to end-face drilling (+10 mm e.g., dowel length 35 mm, flat-side drill depth 14 mm, end-face drill depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drill feed 0–70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit exchange. - Easy swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping carrier, adjustable along the Y-axis, with 3 pneumatic clamping cylinders for workpieces up to max. 80 mm in height. - Ideal stop system consisting of: - 1 stop ruler, 1800 mm, for shelf panel drilling (aluminum profile 40×40 mm) with 3 drop stops, quick-change system, easily adjustable from right to left side for mirrored shelf panel drilling in carcass construction; also suitable for line boring in System 32. - Side stops and position adjustments, as well as drill height positioning, via worktable with mechanical digital counters. - Side stops can be easily swung away for quick conversion from carcass to frame and line boring operations. - Clamping arms for clamping carrier suitable for line boring positions up to 300 mm max. - Ideal three-stage tooling system. Extraction funnel, dust-tested, Ø 120 mm, 1 pc. Set for line boring in system.

Stāvoklis: lietots, Ražošanas gads: 2014, kopējais garums: 5 200 mm, kopējais platums: 900 mm, kopējais augstums: 1 700 mm, Krāsa: pelēka Svars: 500 kg Iodpoyna Aysfx Amistg Cena: pēc pieprasījuma - Ražošanas gads: 2014 - Dokumentācija pieejama: nē - CE sertifikāts: nav - Sērijas numurs: 8.687 - Galvenā motora jauda [kW]: 3.1 - Maks. griešanas dziļums [mm]: 120 - Maks. griešanas augstums [mm]: 90 - Min. zāģa diska diametrs [mm]: 350 - Maks. zāģa diska diametrs [mm]: 350 - Zāģa diska urbum diametrs [mm]: 30 - Spriegums [V]: 400 - Strāvas patēriņš [A]: 6.53 - Drošinātājs [A]: 16 - Jauda [kW]: 3.1 - Transporta izmēri: 5200 mm x 900 mm x 1700 mm (g x p x a) - Transporta svars [kg]: 500 kg - Transporta iepakojumu skaits [gab.]: 2 Finanšu informācija: Pievienotās vērtības nodoklis: Norādītā cena ir bez PVN PVN / starpības nodoklis: PVN priekšnodoklis atskaitāms uzņēmējiem Piegāde un maiņa iespējama jebkuram rūpniecības sektorā esošam aprīkojumam jebkurā laikā Yorick Diebels

Stāvoklis: lietots, Ražošanas gads: 2018, Funkcionalitāte: pilnībā funkcionāls, vārpstu skaits: 35, DAUDZVĀRPU UZGRIEZĒJS AR 1 GALVU MAGGI MOD. BORING SYSTEM 35 Isdpfxex Rcqgo Amijtg - 35 vārpstas ar fiksētu 32 mm attālumu - Gads: 2018