Frama Di380 iegādāties lietotu (144)

Stāvoklis: lietots, Ražošanas gads: 2023, Nr. 10017 GÜNTHER MULTISTAR ONE / MS ONE Two-Fraction Star Screen Used, Year of manufacture: 2023 Approx. 200 operating hours Mobile star screening plant for screening waste wood, biomass, green waste, and other screenable materials into two fractions, as well as for oversize material recirculation. - Input material: specific density 200–650 kg/m³ / max. moisture content 55% / max. piece size and single weight: 1000 mm and 20 kg / material feeding by conveyor belt or wheel loader / throughput up to 200 m³/h - Control system, operation, switch cabinet: Type: PLC / operation via display and control panel / manual or automatic mode / power supply: AC 400 V, 3-phase, 50 Hz with 32A site-side plug - Plant interlinking: 16-pin plug connection / cable (15 m) including cable reel on base frame / screen deck post-run in case of emergency stop / dummy plug in switch cabinet door - Hydraulic support feet: 4 hydraulic support legs / increases discharge height of product fraction by 450 mm / all support feet individually controllable - Feed hopper: capacity approx. 2.5 m³ / feed height 2500–3000 mm / clear feeding length 2300 mm / conveyor: drag chain conveyor with maintenance-free flat-link chain / drive: 2.2 kW, speed adjustable via frequency converter - Collection belt: axle distance 4600 mm / belt width 1000 mm / belt type: smooth / flange-mounted gear motor 2.2 kW, speed 1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS tracking, utilization - Petrol-driven hydraulic pump - HyDrive System 2.0 MS ONE - Screen Deck 60/90: Outputs: 0–60/90 and >60/90 mm / length 4500 mm / width 1450 mm / screening area 6.5 m² / inclination 11° ascending / star shafts: 17 pcs / star diameter 340 mm / star width 55 mm / shaft spacing 266.5 mm / Cleanstar cleaning elements / drive motor: 2 × 4 kW, speed adjustable via frequency converter - Drive motors 50 Hz: Screen deck drive / 2 × 4 kW, 50 Hz - Metering roller: width 1560 mm / diameter 215 mm / 3 kW drum motor / standard beater bars - FKAB with magnetic drum: axle distance 6200 mm / belt width 1000 mm / installation angle 30° ascending / belt type: 15 mm Chevron profiled / flange-mounted gear motor: 3.0 kW, speed 2.2 m/s / usable discharge height 3500 mm – 3950 mm / multi-pole permanent magnetic drum / incl. discharge chute - Oversize discharge belt: axle distance 6200 mm / belt width 1000 mm / installation angle 30° ascending, 220° swiveling / belt type: 15 mm Chevron profiled / flange-mounted gear motor 3.0 kW, speed 2.2 m/s / usable discharge height 3600 mm – 4050 mm Transport dimensions approx. 8176 × 2466 × 2600 mm (L × W × H) Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport, or assembly Specification and price subject to change Dismantling, transport, and loading by us available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of supply according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machinery, all warranty is excluded, sale is “as seen” Images and videos are for illustration purposes and do not reflect actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Bljdpfjwhy T Tsx Afaeg Delivery terms: ex location

Stāvoklis: lietots, Number of spindles: 4 pcs Number of tool sets: 11 pcs Spindle diameter: 50,40 mm Spindle length: 285,125 mm Length: 4000 mm Width: 2000 mm Height: 2200 mm Weinig Univar 10/3 Profile Milling Machine ----- For profiling windows, doors and similar items with asymmetrical circumferential profiles. Suitable for wood thicknesses from 68 to 92 mm. Average processing time per frame (medium size 1.20 x 1.20 m): approx. 2 min. The available tool positions are selected via a selector switch from the operator panel. Machine equipped with 3 hydraulically controlled right-hand precision lifting spindles for mounting 3 sets of tools, 2 x 95 mm spindle stroke per spindle. The spindle stroke is executed in a U-movement, allowing the opening in the fence to remain as small as possible for short workpieces. Horizontal adjustment of the spindle stroke is finely adjustable from the operator side for both tool positions. Central lubrication for the spindle units. For tear-free profiling of window sashes or frames, as well as doors, the 1st spindle can be selected for both left and right rotation. At the last 100 mm of each frame end, this spindle with the corresponding climb-cutting tool dips into the passing timber. This prevents the tool of the subsequent profiling spindle, operating in counter-rotation, from causing tear-out. The first 7 feed rollers can be lifted via foot switch, reducing throughput time. An additional support rail allows profiling of large-format frames. Continuous, chainless rubber roller feed with extremely short roller spacing. Feed beam height adjustment is digitally readable. Electrical equipment conforms to VDE regulations. The machine is delivered with operating tools, but without processing tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1st Profile Spindle (Climb & Counter Rotation) ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference diameter: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable to 20 mm) Horizontal spindle stroke: 80 mm with automatic climb-cutting plunge 2nd Profile Spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference diameter: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable to 20 mm) Bledpfx Asvnv Uuefajg Horizontal spindle stroke: 80 mm 3rd Profile Spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference diameter: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable to 20 mm) Horizontal spindle stroke: 80 mm 4th Profile Spindle - Fitting Unit, right ----- For routing the fitting groove during profiling or for grooving on the longitudinal profile. Pneumatic horizontal adjustment with selector switch in operator panel. Motor: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm, for 2 tools Tool diameter min. 140 mm, max. 180 mm Feed motor power: 1.1 kW Feed speed...

Stāvoklis: labi (lietots), Esterer SS45 frame saw has been completely overhauled technically—only the visual appearance is not in top condition. Passage width: 45 cm, 340 rpm 500 mm stroke Includes complete frame, saw blades, and templates Equipped with hydraulic roller lifting With riving knife Drive power: 30 kW Includes hydraulic unit Bodpfxofvb Eto Afaolg Delivered with complete control cabinet Please also check my other listings. I look forward to your inquiry.

Stāvoklis: teju kā jauns (lietots), Ražošanas gads: 2021, Optimum OPTImill MZ 2S universal milling machine Ideal for training workshops! Now available for immediate delivery. Equipped with NEWALL DP 700 3-axis digital position display. The feed axes are inverter-controlled via the control panel. Versatile range of applications Excellent damping properties and machine frame stability All guideways hardened and precision ground, adjustable via tapered gibs Automatic feeds in X, Y, and Z axes, infinitely adjustable via an electronic joystick on the control panel Electronic feed limit switch-off Ball screws on all axes Centrally and clearly arranged control panel with integrated digital position and speed display Heavy-duty cross table, generously dimensioned and surface precision-ground with 5 T-slots Coolant system included Large handwheels with scaling Machine lamp Smooth and quiet operation Manual central lubrication TECHNICAL DATA Dimensions and Weights Length (approx.): 1239 mm Width/Depth (approx.): 1168 mm Blodpfx Afeuqix Uoaeg Height (approx.): 1900 mm Weight (net, approx.): 1400 kg Drilling/Milling Head Milling head swivel range: ± 90° Drilling/Milling Capacity Max. cutter head size: 100 mm Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 26 mm Max. shank cutter diameter: 25 mm Electrical Data Drive motor power: 2.2 kW Supply voltage: 400 V Mains frequency: 50 Hz Horizontal Milling Table Length: 750 mm Width: 320 mm Vertical spindle to horizontal table min.: 75 mm Vertical spindle to horizontal table max.: 410 mm Horizontal table T-slot size: 14 mm Number of horizontal table T-slots: 5 Horizontal table T-slot spacing: 63 mm Horizontal spindle to horizontal table min.: 70 mm Horizontal spindle to horizontal table max.: 400 mm Horizontal table max. load: 285 kg Vertical Milling Table Length: 830 mm Width: 250 mm Vertical table T-slot size: 14 mm Number of vertical table T-slots: 2 Vertical table T-slot spacing: 63 mm Coolant System Coolant pump drive power: 95 W Travels Manual X-axis travel: 400 mm Manual Y-axis travel: 200 mm Manual Z-axis travel: 335 mm Automatic X-axis travel: approx. 310 mm Automatic Y-axis travel: approx. 160 mm Automatic Z-axis travel: 295 mm Vertical Spindle Vertical spindle reach: 100 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 50–1890 rpm Vertical spindle speed stages: 12 steps Vertical spindle drawbar: M16 Vertical spindle quill stroke: 120 mm Vertical spindle max. load: 1100 Nm Feed Speed Feed speed X-axis: 10–600 mm/min Feed speed Y-axis: 10–600 mm/min Feed speed Z-axis: 10–600 mm/min Electrical Connection Total connected load: 4 kW Motors Rapid traverse X-axis motor power: 0.375 kW Rapid traverse Y-axis motor power: 0.375 kW Rapid traverse Z-axis motor power: 0.375 kW

Stāvoklis: jauns, Ražošanas gads: 2025, celtspēja: 3 500 kg, celšanas augstums: 5 400 mm, degvielas veids: dīzeļdegviela, masta veids: trīskāršs (triplex), būvniecības augstums: 2 555 mm, dakšu garums: 1 200 mm, tukšais svars: 4 700 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are refurbished in accordance with FEM-4.004 and the latest safety standards, ensuring maximum quality and safety. From the frame to the battery, including drivetrain, brakes, steering, and electrics – each vehicle undergoes a thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on site and get expert consultation – we’ll find the right solution for you. Industrial truck data: - Manufacturer: Heli - Model: Counterbalance Forklift CPCD35-H3-KU - Drive type: Diesel - Rated capacity: 3,500 kg - Year of manufacture: 2025 - Operating hours: 0 Bledpfx Asx Rwycjfasg - Lift height: 5,400 mm - Mast type: Triplex - Free lift: Yes - Overall height: 2,555 mm - Fork length: 1,200 mm - Unladen weight: 4,700 kg - Tyres: Solid rubber - Model type: CPCD35-H3-KU - Lighting: 2x front work lights - Lighting: 1x rear work light - Lighting: Rotating beacon - Lighting: Road traffic equipment for limited public road use: indicator, tail light, reversing light, reflector, etc. - Attachment: Sideshift - Attachment: Additional hydraulic circuit plumbed to the fork carriage

Ražošanas gads: 2007, stāvoklis: lietots, Funkcionalitāte: pilnībā funkcionāls, 5 x 148 m³ Aluminium Silo (Plastic Granulate Silo) Technical Specifications / Dimensions Available quantity: 5 Year of manufacture: 2007 Volume: approx. 148,000 liters Container type: Silo Condition: Used Food grade: No Design: Vertical/standing Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Bulk material density: 0.6 t/m³ Operating pressure: Non-pressurized Ground clearance: approx. 770 mm Material / Construction Shell material: Aluminium Notes: Material grade: AlMg3 / AlMgSi3 Supporting structure: Foot ring / base frame Top head: Conical top Slope: approx. 15 % Bottom head: Cone Bljdpfsxqr Eksx Afaeg Cone angle: 90 degrees Top section: 1 x perimeter roof guardrail, height: 1,200 mm 1 x access walkway with guardrail 2 x crane lifting lugs t1 x manhole DN 600 with attached vent connection 1 x mounting flange for level measurement t1 x connection for high level sensor t1 x flange DN 100 (filling) Shell: 1 x operating door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling pipe DN 100 ending in TW connection 1 x welded adapter for empty-level sensor Bottom section: Silo bottoms are designed with a 90° cone, ending with a DN 200 flange and emergency shut-off valve, as well as a mounted suction box.

Stāvoklis: lietots, Ražošanas gads: 2002, Funkcionalitāte: pilnībā funkcionāls, iekārtas/transportlīdzekļa numurs: 02-84-022, jauda: 37 kW (50,31 zs), 4-sided planing and moulding machine, 4 tool holders + universal spindle, 2.50 m table & reinforced motors Brand: CASADEI Model: MATRIX 4+1 Serial No.: 02-84-022 Year: 2002 WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm - Four-sided planer and moulder - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Max. finished wood section: 155 x 230 mm - Minimum working length: 480 mm - Adjustable cutting depth max 10 mm - Spindle speed: 6000 rpm COMPOSITION OF THE MACHINE: - Heavy-duty welded frame - Panoramic, soundproofing hood with gas springs - Raised control panel, operator side - 2500 x 250 mm steel infeed table Floor height: 880 mm Spring-loaded side infeed pressure device Manual table lubrication unit after jointer 1) Bottom horizontal spindle 5.5 kW TERSA cutterhead Ø 125 x h.240 mm 1 retractable vertical roller pressure 2 & 3) Vertical spindles, right then left 1 x 7.5 kW TERSA cutterhead Ø 125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø 125 x h.240 mm - Adjustable exit pressure shoe 5) Universal spindle 7.5 kW Ø 40 x 255 mm 1 retractable horizontal roller pressure FEED SYSTEM: - Feed with inverter: 5 to 25 m/min Feed motor: 1.1 kW (1.5 hp) - 8 independent feed rollers with pneumatic pressure: 2+2 grooved steel, then 2+2 rubber-coated OTHER FEATURES: - CE marking - Main power supply: 380V, 3-phase, 50 Hz - Lockable switch, automatic star-delta start Emergency stop push-buttons front/rear - Installed power: 37 kW (50 hp) IN 62A - Motors with brakes - Cardan spindle drive - Digital position indicators (Siko type counters) for precise manual adjustment per operation - Electrically powered up/down beam for thickness adjustment Lift motor: 0.37 kW - Axial spindle adjustment: Lower horizontal: 0 to 15 mm Upper horizontal: 0 to 25 mm Vertical spindles: 0 to 25 mm - Acceptable tool sizes: Bottom horizontal: Ø 120 to 140 mm For profiling on vertical spindles: Ø 100 to 180 mm For profiling on top horizontal: Ø 100 to 180 mm End surfacing cutter: Ø140x12x40 mm - Recommended pneumatic supply: 7 bar Working pressure: 6 bar Average air consumption: 0.85 Nl/cycle Connection: 1/2" G - Dust extraction, centralised top port: Ø 250 mm Required air speed: min. 25 m/sec Flow rate: 4500 m3/h - Technical manual included. - Machine equipped with 4 TERSA spindles Footprint: 4700 x 1700 x h.1800 mm Weight: 2240 kg Feel free to contact us for supply of consumables, accessories and/or extraction systems. Blsdpfx Afju Sr Iveajg

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 300 t, gājiena garums: 800 mm, galda platums: 1 000 mm, galda garums: 1 000 mm, atstarpe starp kolonnām: 1 000 mm, atvilkšanas spēks: 100 t, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH 300 / 100 Ton Column-Type Hydraulic Deep Drawing Press General Description The CRONOSSTECH 300 / 100 ton column-type hydraulic deep drawing press is a high-rigidity, four-column hydraulic press solution developed for metal forming, deep drawing, and precision pressing applications. The St52-grade welded steel frame undergoes stress relief treatment via vibration, ensuring the maintenance of parallelism and perpendicularity tolerances throughout long strokes during pressing. Ram and cushion systems operate independently; stroke and tonnage settings can be accurately controlled via the touch panel interface. Equipped with REXROTH or PARKER hydraulic components, IE3 motor class, and PLC-controlled structure, the machine ensures high efficiency and reliable operation. The automatic lubrication system and electronic filter clogging alerts minimize maintenance requirements. With a 300 / 100 ton capacity, this model offers an ideal industrial press solution for medium and high tonnage metal forming, deep drawing, and die applications. Key Advantages - High-rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High precision and repeatability - Long-lasting, low-maintenance design Typical Applications - Metal forming operations - Deep drawing processes Bjdjx N Unzopfx Afaslg - Die testing and production lines - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 300 Ton CAPACITY (CUSHION): 100 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER INTERNAL DIAMETER: Ø 390 mm – Ck45 CUSHION CYLINDER INTERNAL DIAMETER: Ø 230 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 18 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 2 500 t, gājiena garums: 1 000 mm, galda platums: 1 800 mm, galda garums: 2 600 mm, atvilkšanas spēks: 800 t, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic spinning presses are developed for heavy-duty deep drawing applications that require very high tonnage, large table sizes, and precise blankholder force. The 8-guideway H-frame construction ensures high rigidity during the pressing process, maintaining parallelism and perpendicularity tolerances throughout the long stroke by controlling both the ram and table movements. The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance for large and deep drawing dies with its 2500-ton main ram and 800-ton blankholder capacity. Its vibration stress-relieved steel frame is designed for long life and reliable operation under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame body • Vibration-stress relieved frame structure • Bronze Zr14 guideway bushings • WPQR and WPS certified welding to TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Hydraulic unit oil temperature and system status monitoring on screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-guideway H-frame structure Frame Material: St52 – ERDEMİR Guideway Slides: Bronze Zr14 Capacity (Ram / Blankholder): 2500 / 800 Tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/m. Stroke (Ram / Blankholder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 pcs) Blankholder Cylinder: Ø450 mm – Ck45 (2 pcs) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note Blodpfx Afjx N Uk Ajajg This machine is manufactured by CRONOSSTECH in Turkey.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 1 500 t, gājiena garums: 1 000 mm, galda platums: 1 500 mm, galda garums: 2 400 mm, atvilkšanas spēks: 500 t, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHSP 1500/500 H Type Hydraulic Deep Drawing (Forming) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are engineered to deliver maximum frame rigidity, precise parallelism, and long-lasting operation in deep drawing applications requiring very high tonnage and large table dimensions. Thanks to the 8-gibbed H-frame construction, ram and table motions are controlled and stable throughout the pressing process. The CHSP 1500/500 model, with a 1500-ton main ram and 500-ton blank holder capacity, is developed for large-sized dies, deep drawing, and precision forming operations. The stress-relieved welded steel frame ensures superior durability and reliability under heavy industrial conditions. ⚙️ Standard Equipment • Welded steel construction, 8-gibbed H-frame body • Stress-relieved frame by vibration • Bronze Zr14 slideway bearings • Welded structure with WPQR and WPS certificates accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial-grade safety systems for operator protection Bedox N Ukiopfx Afaslg 📐 Technical Specifications – CHSP 1500/500 Type: Welded steel construction, 8-gibbed H-frame body Frame Material: St52 – ERDEMİR steel Slideway Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 Tons Movable / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron per meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 pcs) Blank Holder Cylinder: Ø360 mm – Ck45 (2 pcs) Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 1 200 t, gājiena garums: 1 000 mm, galda platums: 1 500 mm, galda garums: 2 000 mm, atvilkšanas spēks: 400 t, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHSP 1200/400 H Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic spinning and deep drawing presses are designed to provide maximum rigidity, precision, and process control for high-tonnage sheet metal forming applications. The 8-gibbed H-frame structure ensures stable maintenance of parallelism and squareness tolerances, even with large table sizes. The CHSP 1200/400 model, featuring a 1200-ton main ram and 400-ton cushion capacity, is engineered for heavy-duty industrial applications requiring deep drawing, spinning, and controlled material flow. The vibration stress-relieved steel construction offers long-lasting, reliable performance. ⚙️ Standard Equipment • Steel construction, 8-gibbed H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 gib bearing system • WPQR and WPS certified welding procedures by TÜRK-AK accredited bodies (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning • Real-time monitoring of hydraulic unit oil temperature and system status via display Bsdpsx N Uirofx Afajlg • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety equipment for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8-gibbed H-frame press body Frame Material: St52 – ERDEMİR Gib Bearings: Bronze Zr14 Capacity (Ram): 1200 Ton Capacity (Cushion): 400 Ton Moving / Fixed Table: 1500 × 2000 mm Parallelism / Squareness: 120 / 60 micron/meter Stroke (Ram / Cushion): 1000 / 350 mm Daylight (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 units) Cushion Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 1 000 t, gājiena garums: 1 000 mm, galda platums: 1 500 mm, galda garums: 2 000 mm, atvilkšanas spēks: 350 t, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHSP 1000/350 H Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a dual-acting (ram + blankholder) system architecture for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure ensures high rigidity throughout the pressing cycle and reliably maintains parallelism and perpendicularity tolerances even at large table sizes. The CHSP 1000/350 model is specifically designed for deep drawing processes requiring controlled material flow, with a main ram capacity of 1000 tons and a blankholder force of 350 tons. Common fields of use include automotive, white goods, defense, and heavy industries. Its vibration stress-relieved welded steel construction ensures a long service life and robust, reliable operation. ⚙️ Standard Equipment • Steel construction, 8-guided H-frame press structure • Stress relief via vibration-aging process • Bronze Zr14 guide bushings • TÜRK-AK accredited WPQR and WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination monitoring • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear • Operator safety interlock systems 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMIR Guide Bushings: Bronze Zr14 Ram Capacity: 1000 Tons Blankholder Capacity: 350 Tons Moving / Fixed Table Size: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blankholder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blankholder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note Bljdsx N Uiljpfx Afasg This machine is manufactured by CRONOSSTECH in Turkey.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 800 t, gājiena garums: 1 000 mm, galda platums: 1 500 mm, galda garums: 2 000 mm, atvilkšanas spēks: 270 t, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting (ram + blank holder) working principle for high-tonnage sheet metal forming, deep drawing, and forming applications. The 8-guide H-frame structure ensures high rigidity, stable parallelism, and long die life even with large table dimensions during pressing operations. The CHSP 800/270 model, featuring an 800-ton main ram and a 270-ton blank holder capacity, is specifically developed for processes requiring precise material flow control in automotive, white goods, defense industry, and heavy sheet forming applications. The vibration stress-relieved steel construction frame ensures long life and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body • Vibration-stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS welding applications approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Display screen for monitoring hydraulic unit oil temperature and system status Bodpfxjx N Uh Us Afajlg • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switchgear components • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 800 Ton Capacity (Blank Holder): 270 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Blank Holder): 350 mm Min. / Max. Daylight Opening: 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC: DELTA Touch Panel: DELTA 7” Approximate Weight: 54 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 600 t, gājiena garums: 1 000 mm, galda platums: 1 200 mm, galda garums: 1 500 mm, atvilkšanas spēks: 200 t, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHSP 600/200 H Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib-Slide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow for sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-slide H-frame design, maximum rigidity is maintained throughout the pressing process, and parallelism and perpendicularity tolerances are stably preserved along the full stroke. The CHSP 600/200 model, featuring a 600-ton main ram and a 200-ton lower cushion (pot) capacity, is designed to provide full control over the die and workpiece during high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibratory stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination alert - Real-time monitoring of hydraulic unit oil temperature and system status via the display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS and SCHNEIDER electrical components 📐 Technical Specifications – CHSP 600/200 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 600 Ton Capacity (Cushion): 200 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 1000 mm Cushion Stroke: 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved and TÜRK-AK accredited EN ISO 15614-1/2017 (Welding processes supervised by certified “welding coordination engineers” according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Bore: Ø550 mm – Ck45 Cushion Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5900 mm Approx. Press Width: 3250 mm Bsdpfjx N Uhzjx Afajlg Approx. Press Depth: 2300 mm Height of Lower Table from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 35 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 150 t, gājiena garums: 600 mm, galda platums: 1 000 mm, galda garums: 1 200 mm, atvilkšanas spēks: 50 t, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHSP 150/50 H Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideway General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to provide controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guideway H frame structure ensures maximum rigidity during the pressing process; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model features a 150-ton main ram and a 50-ton blank-holder ram (cushion), engineered for precise and repeatable deep drawing operations. The frame construction is stress-relieved through vibration to ensure durable and reliable service life. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guideways - Vibratory stress-relieved frame structure - Bronze Zr14 slide bearings - Welding applications approved by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - 7” touchscreen panel (DELTA) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Oil temperature and hydraulic system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 150/50 - Type: Steel construction, H-frame with 8 guideways - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 150 Tons - Capacity (Cushion): 50 Tons - Moving Table Dimensions: 1000 × 1200 mm - Fixed Table Dimensions: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 600 mm - Stroke (Cushion): 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibratory - Welding Application: WPQR and WPS certified by TÜRK-AK in compliance with EN ISO 15614-1/2017 (All welding is supervised by certified "welding coordination engineers" as per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 18.5 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Advance Speed: 30 mm/sec - Main Cylinder Bore: Ø280 mm – Ck45 - Cushion Cylinder Bore: Ø160 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units Bljdpfx Afjx N T U Hjasg - Approx. Press Height: 3650 mm - Approx. Press Width: 2950 mm - Approx. Press Depth: 2000 mm - Lower Table Height from Floor: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 11 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 1 200 t, gājiena garums: 1 000 mm, galda platums: 1 500 mm, galda garums: 2 000 mm, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, RONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. With its H-frame body featuring 8 slideways, it ensures maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model delivers reliable and long-lasting performance for industrial production lines demanding high force. Bljdpfxsx N T Rue Afaog The frame is stress-relieved by vibration techniques, maintaining parallelism and perpendicularity tolerances by evenly distributing the loads generated during pressing. ⚙️ Standard Equipment - Steel construction, H-frame press design with 8 slideways - Frame structure stress-relieved by vibration - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status display on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 - Type: Steel construction, H-frame press body with 8 slideways - Frame Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 1200 Tons - Moving Table Size: 1500 × 2000 mm - Fixed Table Size: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: Via vibration - Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Approach Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø560 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6100 mm - Approx. Press Width: 3550 mm - Approx. Press Depth: 2400 mm - Lower Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 60 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 400 t, gājiena garums: 800 mm, galda platums: 1 200 mm, galda garums: 1 500 mm, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications, featuring high rigidity. Thanks to the 8-guide H-frame construction, high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 400 model is designed to deliver durable and reliable performance in heavy-duty applications requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operation. The frame and supporting parts are stress-relieved by vibration. Bronze Zr14 slide bushings ensure precise and uniform load distribution during the ram movement, contributing to long-term precision. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 slide guides - Stress-relieved frame and support parts by vibration - Bronze Zr14 guide bushings - WPQR & WPS welding applications approved and accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, H-frame with 8 guide slides Frame Material: St52 – ERDEMİR Slide Guidance: Bronze Zr14 Capacity (Ram): 400 Tons Movable Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 microns/m Squareness Tolerance: 60 microns/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relieving Welding Application: WPQR and WPS welding certificates accredited by TÜRK-AK, compliant with EN ISO 15614-1:2017 (inspected by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø450 mm – Ck45 Bsdpsx N T Hpsfx Afaolg Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 5600 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stāvoklis: jauns, Ražošanas gads: 2025, preses spēks: 300 t, gājiena garums: 600 mm, galda platums: 1 000 mm, galda garums: 1 200 mm, darba spiediens: 250 stieple, Aprīkojums: dokumentācija / rokasgrāmata, drošības gaismas barjera, CRONOSSTECH CHP 300 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet forming, straightening, assembly, and die pressing applications. The 8-guideway H-frame structure evenly distributes the high loads generated during pressing and provides stable, repeatable operation. The CHP 300 model is designed to deliver long-lasting and reliable performance for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operating conditions. The frame and supporting components are stress-relieved by vibration. The bronze Zr14 slideway bearings ensure balanced load distribution during ram travel, helping maintain precision over time. ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and carrier parts - Bronze Zr14 slideway bearings Bljdpfx Afox N T E Ejajg - WPQR & WPS welding applications approved by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in conformity with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic power unit oil temperature and system status display - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 - Type: Steel construction, 8-guideway H-frame press - Frame Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 300 Tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 600 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 welding application certificate (monitored by certified welding coordination engineers according to EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Speed: 150 mm/s - Moving Table Forming Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Overall Height: 4400 mm - Approximate Overall Width: 3250 mm - Approximate Overall Depth: 2200 mm - Height of Lower Table from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Display: DELTA 7” - Switching Components: SIEMENS – SCHNEIDER - Approximate Weight: 10.5 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Ražošanas gads: 2020, stāvoklis: lietots, Nr. 3233 Wema Probst QBV 200 Cross Drilling Machine Used, Year of manufacture: 2020 The machine is in like-new condition, with fewer than 30 drillings performed. For making cross-millings and drillings in round-milled or profiled timbers. With this machine, positive-locking joints can be produced in round timber with three-dimensional manual adjustment. Typical applications include corner joints for log houses, timber frame constructions, or garden timber products such as fences, carports, planters, raised beds, guardrails, etc. The cross drilling machine consists of a base frame in steel welded construction with a swiveling drilling unit, gas spring-assisted drill column, and an adjustment for the drill column position. Wood is clamped using two centering vices. Asymmetrical or end-face machining is possible with the special tool (circular saw blade). The machine also allows for drilling 90° holes up to a max. diameter of 120 mm in timber using flat drill bits. Accessories: Collet chuck with 25 mm diameter for tool holding, without tools. Wood diameter: 60 – 200 mm Tool adjustment range: +/- 60° for 60 mm diameter / +/- 45° for 80 – 140 mm diameter / +/- 30° for 160 – 200 mm diameter Motor power: 2.2 kW Speed: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm (LxWxH) Weight approx. 380 kg Sale on behalf of customer, ex location near 46026 Valencia (Spain), without dismantling, transport or installation Dismantling, loading, and transport can be arranged by us as an option Errors in description and price excepted To avoid potential misunderstandings, viewing by appointment on site is possible and recommended Sale as is Technical data, condition, year of manufacture and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale With used machines, all warranties are excluded; goods are sold "as inspected." Pictures and videos are for illustration purposes only and may not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Bodpfx Afswt Abwjaslg Delivery terms: ex location