Pneumatico Evp 153L30 iegādāties lietotu (117)

Stāvoklis: labi (lietots), WEISS climatic test chamber with seat pulser Manufacturer: Weiss Model: SD 1400/+20 DU Bwjdsxbgrgspfx Afasl Test Chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1,440 liters External Housing: Material: double-coated Zincor sheet Dimensions: Height approx. 2,000 mm Width approx. 2,200 mm Depth approx. 2,000 mm HxWxD: 2000 x 2200 x 2000 mm Finish: light grey (RAL 9002) Door, double-leaf: hinged left and right Equipment: Feedthroughs in floor and ceiling: 2 each, NW 100 mm, for inserting the pulsation tables Feedthroughs in side walls: 1 each, left/right, 100 mm Refrigeration unit: air-cooled Control system: Digital measuring and control system DMR Basic operating panel: integrated in main control panel Interface: RS 232 C, for PC connection Software: Operating software for MS-Windows Performance Data: Temperature range without climatic function: +20...+100 °C Temperature constancy without climatic function: +0.2 ... +0.5 K (over time), depending on range, at steady-state Temperature range with climatic function: +20...+95 °C Temperature constancy with climatic function: +0.2 ... +0.5 K (over time), depending on range, at steady-state Dew point range: +20...+94 °C Humidity range: 10...98 % r.H. Humidity constancy: +3 ... +5 % r.H. depending on range, at steady-state Temperature change rate measured at air outlet without specimen and without load: - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C Performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage Proper operation requires an ambient temperature between +10 and +35 °C Seat test device with steel frame for mounting and fastening on climatic test chamber, incl.: • 2 pneumatic weight-lifting devices (150 mm stroke) for test specimen change, 12 weights of 5 kg each • 1 base frame in standard steel welded construction for fastening to the underside of the climatic test chamber. The frame is fitted on all sides with removable panels and has two hinged doors for adjusting the eccentricity. These doors are equipped with safety switches. • 2 eccentric disks with bearings and tachometer • 2 connecting rods • 2 linear ball-bushings • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting seat form simulators • 2 load rods Ø 60 mm made of stainless steel (connection to the test specimen is not included in our price, but can be offered separately upon precise definition) • 2 three-phase motors • 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, a filter-regulator unit and a shut-off valve • 1 electrical control cabinet with 2 SEW frequency converters, hand switch, emergency stop button, 2 start buttons, 2 stop buttons, 2 speed displays, 2 potentiometers for speed adjustment, 2 pre-selectable cycle counters with zero-reset and shut-off Technical Data: Frequency: 100-1000 cycles/minute Load: 2 x 45 kg Stroke: 0 - 40 mm Downward load: 450 N each Financing through our bank is available. komplett-konzept.leasingo.de For more products - new and used - please visit our shop! International shipping costs on request!

Stāvoklis: lietots, Funkcionalitāte: pilnībā funkcionāls, Stanley Tucker Bolt Setting System TE1500 + TF21D + LM310 – Stud Welding & Fastening System Manufacturer: Stanley Engineered Fastening / Tucker / Emhart System consists of: Control Unit / Power Supply: TE1500 (Part No. T028 618/400) Feeder Unit: TF21D (Part No. T059 060) Stud Setting Device: LM310 (Part No. T133 016) Made in Germany Bwedpfx Afex Tfypeajl Description: This professional Tucker bolt setting system is a complete industrial joining package for fully automated installation of: - Weld studs - Press-fit studs - Fasteners for bodywork structures - Structural sheet metal connections Tucker / Stanley systems are used worldwide in automotive production because they are: - Extremely reliable - Highly precise - Durable - Perfectly integrable into robotic cells The system comprises: 1️⃣ TE1500 Control Unit / Power Supply - Supplies the setting device - Controls process parameters - Input: 400 V, 50/60 Hz - Type: TE1500/3.032.55.03.0405.X - Serial No.: 14/4409830349001 2️⃣ TF21D Feeder Unit - Automatic provision & feeding of studs - Mains voltage: 24 V - Type: TF21D.00.00/5.16F8 - Serial No.: 14/4328730020002 3️⃣ LM310 Stud Setting Device - Pneumatic / servo-assisted setting gun - Type: LM310/K.00.00 - For final placement / press-fitting / setting of studs - Network: "Stud 5.14" (system-specific input value) - Serial No.: 13/3850680080004 Technical Key Data (from nameplates) Control Unit TE1500 - Mains Voltage: 400 V - Frequency: 50/60 Hz - Type: TE1500/3.032.55.03.0405.X Feeder Unit TF21D - Supply: 24 V - Type: TF21D.00.00/5.16F8 - Automatic conveyor for studs / fasteners Setting Device LM310 - Type: LM310/K.00.00 - High-precision setting module for automotive bodywork Typical Areas of Application - Automotive industry / OEM manufacturing - Robotic cells (KUKA, ABB, FANUC, retrofit systems) - Structural sheet metal assembly - Joining technology for body components - High-volume serial production

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 2007, Pressing force: 2,000 kN Table surface: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping surface: 2,300 x 1,100 mm Side clearance: 740 mm Installation height: 550 mm (stroke down, adjustment up) Stroke rate: 30 – 140 spm, infinitely variable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: Bwedpfxsv T Anle Afael • Siemens + Beckhoff control system • 8-way slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram weight compensation • Electromotive stroke adjustment • Siemens + Beckhoff control system • Beckhoff Panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 tool safety locks + 4 cam outputs • Ram with 20 mm wide central slot • Hydraulic die clamps at table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Strip width: 100 – 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion via wedge segments • Rear support disc and 3 attachable front edge arms • Hydraulically actuated and driven pressure roller, laterally adjustable via handwheel • Coil loading station (stationary, decoiler travels hydraulically), lift height 770 mm with 4 limit rods Straightener Type: RMBMZ 50.600 UF Strip width: 40 – 600 mm Strip thickness: 0.5 – 4.0 mm Straightenable cross-section: 1,200 mm² Number of rollers: 9 pcs. Straightening roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 – 25 m/min Features: • Rollers hardened, ground, and hard-chrome plated • Drive of lower straightening and infeed rollers via gear drive • Motorized roller carriage adjustment via motors, setting accuracy 1/100 mm, values can be saved • Upper rollers openable by 100 mm • Infeed roller pneumatically disengageable • Lateral strip guide at infeed with handwheel and threaded spindle • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic feed assist, consisting of table with extendable tongue and upper bending roller Roll feed Strip width: max. 600 mm Features: • Rollers hardened, ground, and chrome plated • Drive via gear motor • Upper roller hydraulically disengageable • Height adjustment hydraulic • Lateral strip guide at infeed with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the complete line • Decoiler and straightener mounted on a common base frame • Various spare rollers for the straightener The complete line can still be inspected under power at the seller's premises!

Stāvoklis: darbnicā atjaunots (lietots), Ražošanas gads: 2004, Krauss-Maffei KM 650-3500 C 1 650 ton Krauss-Maffei injection moulding machine, year 2004, with only approx. 45,000 hours in automatic operation. The machine is delivered refurbished. REFURBISHED MACHINE Equipment: 6 pneumatic cascades, 24 hot runner zones, 1 core pull on the fixed and 1 core pull on the moving platen. Electric screw drive. Technical Details: CLAMPING FORCE: 6,500 kN PLATEN SIZE: 1,540 x 1,440 mm DAYLIGHT BETWEEN TIE BARS: 1,110 x 960 mm MAX. MOLD OPENING STROKE: 1,150 mm MAX. DAYLIGHT OPENING: 1,750 mm SCREW DIAMETER: 90 mm MIN. MOLD HEIGHT: 600 mm YEAR OF BUILD: 2004 Bodpfxohy Nnbo Afaswl SHOT VOLUME: 1,953 cm3 SHOT WEIGHT: 1,777 g INJECTION PRESSURE: 1,742 bar

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 1997, Funkcionalitāte: pilnībā funkcionāls, kopējais garums: 4 500 mm, kopējais platums: 2 230 mm, kopējais augstums: 3 000 mm, tilpuma plūsma: 9 250 m³/h, jauda: 250 kW (339,91 zs), ieejas frekvence: 50 Hz, 1 gab. rotācijas virzuļa pūtējs Ražotājs: Kemostal (Tuthill M-D Pneumatics) Tips: KPAB 1230 PD-Plus Gaisa tilpuma plūsma: 9250 m³/h (154 m³/min) Spiediena starpība: 500 mbar Maksimālais procesa spiediens: 1000 mbar Izejas cauruļvada diametrs: Ø 406,4 mm Elektromotors: ABB Tips: M2CA 355MA 4 B3 Bsdov T Tr Ijpfx Afajwl Jauda: 250 kW Apgriezieni: 1487 apgr./min Spriegums: 400 / 690 V Skaņas izolācijas kabīne: ar 4 durvīm Garums: 4500 mm Platums: 2350 mm Augstums: 3000 mm

Stāvoklis: jauns, Sheet length: 3035 mm | Sheet thickness: 6.0 mm | Total power requirement: 11 kW | Weight approx.: 8,300 kg | Dimensions (LxWxH): 3775 x 2955 x 2260 mm Our strong brand, KKI CNC GUILLOTINE SHEAR, link motion design Model AS 3006 has everything you need for perfect cutting. CNC-guided guillotine shear by KKI Thanks to durable and robust mechanics and hydraulics, precise ball screw backgauge, and user-friendly CNC control, Dener guillotine shears are highly effective production machines. Our standard portfolio includes shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters. Higher sheet thicknesses and cutting lengths are available on request. Dener guillotine shears owe their long service life to their particularly robust, fully welded frame construction. The entire machine body, cutting beam, and backgauge are highly resistant to twisting and deformation, ensuring top cutting quality. By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade gap. Our strong brand KKI CNC GUILLOTINE SHEAR, link motion design Model AS 3006 has everything you need for perfect cutting. Technological advantages - Fast and precise cuts - Sturdy, long-lasting frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR link motion design Model AS 3006 has everything you need for perfect cutting. With our patented blade support system, the upper blade can be finely adjusted and stabilized, ensuring precise, high-quality cuts, preventing so-called banana cutting. Technical data: Sheet thickness: 6 mm Cutting length: 3,035 mm Cutting angle: 0.5–3° Number of holddowns: 15 Backgauge: 1,000 mm via CNC Motor power: 11 kW Cutting speed (0.5–3°): 29–12 cuts/min Throat depth: 350 mm Oil tank: 200 liters Length: 3,775 mm Width: 2,300 / 2,955 mm Height: 2,260 mm Weight: 8,300 kg • Link motion design • CNC control: - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw spindles for backgauge • Balls in the table • 1,500 mm side stop • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm foldable finger guard Optional pneumatic sheet support system, EUR 6,320 Bjdpfed Egq Aox Afaswl We have many references!

Stāvoklis: ļoti labs (lietots), Bystronic Model: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material onto right-angled glass panes as part of a solar module production line. The material forms a seal with a second glass pane, which is applied in a subsequent production step. Feeding, application, and discharge of the panes occur on horizontally running belts/conveyors. The thermoplastic applicator is a highly advanced machine that must meet numerous requirements with exceptional precision. Therefore, you should only process raw materials (glass, sealant) that meet the specifications listed on the following pages. This helps ensure high-quality and safe production. Performance Data & Connection Values - Maximum conveyor speed: 18 m/min - Height of glass conveyor surface: 1100 mm - Applied sealant bead height: 0.5 to 1.2 mm - Maximum applied sealant bead width: 12.0 mm - Required constant pneumatic inlet pressure: 6.5 to 8.0 bar - Operating pneumatic pressure: 6.0 bar - Compressed air consumption (normal operation): 10 NL/min - Compressed air consumption (drum change): 500 NL/min - Average energy consumption per hour: 10 kWh - Working temperature for sealant: 110°C to 130°C Ambient Conditions & Emissions - Minimum ambient temperature: +15°C - Maximum ambient temperature: +35°C - Maximum relative humidity: 75 % - Noise level: less than 70 dB(A) Sealant Drum Requirements - Design: Material drum with lid D18 according to DIN 6644 – with foot (F1) and smooth outer surface (smooth drum design) - Capacity: 216 liters - Internal diameter: 571.5 mm - Height: 874 mm - Minimum wall thickness: 1.25 mm Processable Glass Panes - Glass Type: Glass panes with a flat surface (float glass) - Min./max. dimensions/geometries: - Length: 1198 mm / 1200 mm - Width: 498 mm / 600 mm - Thickness: 1.8* mm / 5.0* mm - Only thermoplastic sealants based on polyisobutylene (butyl) can be used. The material must be flowable within approx. 110°C–130°C and have a defined viscosity range. - Only use materials which have proven effective in practice and are approved by both the material manufacturer and Bystronic for your intended application. For detailed product descriptions as well as information on handling, storage, and disposal of the thermoplastic, please refer to the product information and safety data sheets provided by the manufacturers. Portal Robot with Glass Conveyor – Dimensions - Height x width x depth: 2800 x 1890 x 2735 mm - Weight of portal robot: 850 kg - Weight of glass conveyor: 1400 kg Bjded N Erpjpfx Afajwl Drum Pump Dimensions - Height x width x depth: 3320 x 1060 x 1200 mm - Weight (without drum): 850 kg - Weight (with drum): 1100 kg - Height H (drum pump FP1): 4400 mm - Height H (drum pump FP2): 4000 mm Control Cabinet Dimensions - Height x width x depth: 2200 x 1800 x 600 mm - Weight: 450 kg The applicator was used with butyl material. Condition: Used From test laboratory, as new, only a few operating hours for testing! Scope of delivery: (see image) (Specifications and technical details subject to change and correction!) Further questions can be answered by phone.

Stāvoklis: lietots, dr. wiesner Type: INTEGRA DDV -1...1 bar Item Description: dr. wiesner Integra Leak Test System The Classic – for all common test procedures The leak test system for industrial leak and flow testing with fully graphical color display up to three independent test circuits operable up to 255 test programs savable automatic process optimization autoTune (option) communication via flexibly exchangeable bus coupling modules freely programmable fixture control freely programmable special test procedures The device is suitable for tests according to the relative and differential pressure method with overpressure. Special versions: none Technical Data: Power supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) pneumatic: clean and dry compressed air max. 7 bar (at P connector) Test pressure range: 0 ... 1000 mbar, electronically regulated Measurement ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit Bwedpswqm Ddofx Afajl 15.0 cm³ reference circuit Interfaces electrical: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) pneumatic: Connection test piece (test) Connection reference circuit (ref.) Housing Protection class: IP40 Dimensions: 450x185x380mm (W x H x D) Weight approx. 15.5 kg Condition: used (Specifications and technical data may be subject to change and error!) For further questions, we are happy to answer your call.

Stāvoklis: ļoti labs (lietots), Tips: SWT 200/400-S White spray and splash water test cabinet This unit is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. According to DIN VDE 0470 T1 / EN 60529 for tests to protection ratings IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features: - Glass door with wiper - Pneumatic drive of the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and exchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Mechanical load data: - Maximum load with test specimen (evenly distributed): - Permissible specimen weight for test supports (total): 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class testing: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: Bjdpfx Ajxg Hrkofaowl - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operation data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see photo) (Subject to technical changes and errors in the data. Specifications are not binding!) Further questions can be answered by telephone.

Stāvoklis: lietots, TOX Pressotechnik Pneumo-Hydraulic Cylinder Hydro-pneumatic press, power pack Model: S 04.00.050.12 D Serial No.: 208696.460 Year of manufacture: approx. 2000 Pressing force: - 4.0 tons at 10 bar - 3.0 tons at 8 bar - 2.6 tons at 7 bar - 2.4 tons at 6 bar - 2.0 tons at 5 bar - 1.6 tons at 4 bar - 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Piston rod thread: M22 x 2 mm Compressed air requirement: 3 to 10 bar Bwsdpfou D Tz Uex Afasl - Electronic oil pressure switch with digital display by TOX for force measurement, type 167282 - Installation height, power pack with piston rod: 610 mm - Installation height, power pack/hydropneumatic cylinder only: 560 mm - Additional base plate: 160 x 160 x 20 mm - Ram plate: Ø 68 mm Required space (L x W x H): 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 units available, price per unit

Stāvoklis: lietots, Ražošanas gads: 2000, iekārtas/transportlīdzekļa numurs: P18096N, Funkcionalitāte: pilnībā funkcionāls, preses spēks: 20 t, gājiena garums: 160 mm, kopējais augstums: 2 150 mm, kopējais svars: 180 kg, Labdien, mēs piedāvājam lietotu darbnīcas presi Rodcraft, modelis WP 20F. Ražotājs: Rodcraft Pneumatic Tools GmbH & Co. KG Modelis: WP 20 F Izgatavošanas gads: 2000 Mašīnas Nr.: P18096N Hidrauliskais gājiens: 160 mm Preses spēks: 20 t Iekārtas izmēri: 2150 x 960 x 660 mm Bwsdpfsygm N Dex Afasl Transportēšanas izmēri: 2150 x 980 x 750 mm Svars: 180 kg Piezīme: Augstāk norādītie tehniskie dati ņemti no ražotāja brošūrām vai citiem avotiem, tādēļ par to precizitāti un pilnīgumu nevaram garantēt. Piegādes komplektācija: 1 gabals lietots darbnīcas preses Rodcraft, modelis WP 20F Lietojuma joma un stāvoklis: Presi reti izmantoja uzņēmuma mehāniskajā darbnīcā galvenokārt gultņu izspiešanai/ielekšanai u.c. darbiem. Iekārta ir pilnībā darbspējīga un labā tehniskā stāvoklī. Būsim priecīgi, ja šī iekārta Jūs ieinteresēs. Jūsu servisa komanda Mertens & Frowein GmbH

Stāvoklis: lietots, Ražošanas gads: 2007, iekārtas/transportlīdzekļa numurs: 1377, STROMAB TR 500 PNEUMATIC MITRE SAW – CE COMPLIANT – USED - Equipped with 4000mm TIGERSTOP electronic positioning stop - 4500mm infeed roller table - 4500mm outfeed roller table - blade diameter: 500 mm - maximum cutting capacity: 360 mm (W) x 60 mm (H) or 135 mm (H) x 280 mm (W) - 10 HP motor - 415 volts - serial no. 1377 Bwjdpfx Afst U Izpsasl - year of manufacture: 2007

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 2003, x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm Control: Siemens type 810 D Total power requirement: 15 kW Machine weight: approx. 1.6 t Bwodpfou Rdpiex Afasl Space requirement: approx. m Universal CNC tool milling machine Type: DMU 35 M – 810 D Working area: X-axis (longitudinal travel of milling slide): 350 mm Y-axis (cross travel of milling slide): 240 mm Z-axis (vertical travel of table slide): 340 mm C-axis – table rotation, manual: 360° B-axis – table tilt, manual: +105° / -15° Table surface (rounded): 280 x 400 mm Table load capacity: approx. 100 kg Tool holder: SK 40 Spindle speeds, infinitely programmable: 20 – 6,300 rpm Feed rates / rapid traverse, infinitely variable: 20 – 5,000 mm/min Feed drive / power: 1.6 Nm AC main drive: approx. 10 kW Total drive: approx. 15 kW – 400 V – 50 Hz Weight: approx. 1,600 kg Accessories / Special equipment: • Siemens path control type 810 D (Processor 840 D) for interpolation in 3 axes with screen, electronic handwheel, swiveling control panel, SIEMENS ShopMill software (version 05.03.22) with additional DECKEL MAHO programming section for straightforward and fast shop floor programming. • Manual tool change with SK 40 holder, pneumatic tool clamping • Universal table, manually rotatable and tiltable via handwheels, with digital position display on the control screen (rotary encoder), allows 5-sided machining in a single setup • Complete machine enclosure with 2 sliding doors; currently no coolant tank available as the machine was connected to a central system. Operating manuals

Stāvoklis: jauns, Barbaric B3 Vacuum Lifter, Pivoting, incl. Crane - Showroom Machine - Included: - Vacuum Lifter BARBARIC uniWood UWL 3, 150 kg Bwjdpfxou R Szae Afasl For vertical and horizontal handling of flat standard panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilting device - Complete with lifting unit and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction pads Ø 270 mm mounted on an adjustable crossbeam (crossbeam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable crossbeam (crossbeam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version allows lifting materials up to 250 kg. Included: - Option: Comfort control BARBARIC uniWood All controls for the lifting mechanism and the vacuum lifter are integrated in a single controller – our special handling grip. This enables convenient one-hand operation for both system control and load handling. The lifting process can be infinitely variable via frequency inverter. Comfort execution comes complete with hoist and all required safety features (vacuum gauge and 2-button safety control for load release). Included: - Column-mounted pivoting crane BARBARIC Load capacity at the lifting device: 250 kg The load capacity indicates the usable payload at the lifting device. Barbaric swing cranes are designed for handling applications in all areas and are extremely lightweight. The crane system consists of column, mounting bracket and low-friction jib. Manual pivoting and trolley movement. Installation requires a suitable concrete floor (C20/R5, min. 20 cm). Floor static verification must be performed and documented by the customer. For installation on cracked or less stable floors, enlarged base plates are available on request. Mounting: supplied with chemical anchors for concrete floors. For orders without hoisting gear, please specify the desired cable or hose routing! The delivery includes trolley, energy supply, and compressed air connection. - New showroom unit -

Stāvoklis: ļoti labs (lietots), Ražošanas gads: 2012, Funkcionalitāte: pilnībā funkcionāls, Z ass pārvietošanās attālums: 500 mm, Rondcom 54-SD3 / ACCTEE PRO Form tester with steel base, including air-bearing, high-precision CNC rotary table and motorized Z-axis column (Z=500mm), consisting of: Measuring unit E-RT-R531A Detector holder E-DT-R749A Probing arm EM46000-S302 (diameter 1.6mm) Detector E-DT-R120A Control board for PC operation, interface controller Base software ACCTee PRO Roundness for MS WIN XP/7 Calibration sphere E-MG-R01A (roundness 0.05 μm) Tool set/gauge block set with factory certificate (1.47mm and 1.49mm) Fuse (1A), user manual, device inspection certificate CNC probe holder with outreach height H=153 mm; outreach depth T=65 mm; suitable for use with R44/54 SD/DX with detector E-DT-R120A Accretech description: E-DH-R770B Z220 HP Workstation G1 - HP Single Unit (CMT) Packaging Bwjdpfxjx Sckpe Afael - HP Z220 CMT 400W 90% Efficient Chassis - Windows 7 Prof. 32/64bit OS - Intel Core i3-2120 3.3 3M 2C GT1 CPU - 4GB DDR3-1600 ECC (2x2GB) RAM - 500GB 7200 RPM SATA 6G 2nd HDD - ATI V4800, 1 GB RAM - Network interface - 16X SuperMulti DVDRW SATA 1st ODD 29-piece probe set for Rondcom Three-jaw chuck E-WJ-R01C FX comfort version workstation base Rondcom 44/54 Table dimensions 1076x1076x810mm consisting of: Closed substructure with 4 mounting points for air springs, steel base frame, color RAL 7035 integrated hard granite plate 1000x630x100mm All wood elements melamine resin-coated graphite black 3x side and rear sheet metal claddings 1x large wood storage shelf with square cutout + 1x insert shelf Intermediate wooden shelf 2x front doors wood + extra adapter plates for higher load capacity option due to heavy Z-axis column 1x monitor bracket consisting of column and folding arm Integrated air suspension system 4x membrane air springs BiAir 0.25-ED-LT, (natural frequency vertical approx. 2.5Hz) Load capacity at 6 bar: 170 kg 4x GDR 0.25-LT 1x mechanical-pneumatic level control MPN-LCV, reset accuracy ±0.1 mm, 1x compressed air maintenance unit WFD-M, 4x leveling elements BNRS 70/4, (leveling range 750mm +/-30mm possible) 4x leveling screws M16 x 100 mm 1x complete assembly of wood cladding elements

Stāvoklis: jauns, Ražošanas gads: 2026, CASADEI Libra 35 - Wide Belt Sander, Dual-Belt Configuration Immediately available - In stock at 54634 Bitburg Technical Data Sanding width 1100 mm Min. / max. working height 4 /170 mm Abrasive belt width 1115 mm Abrasive belt length 1900 mm Feed speed 4.5 / 9 m/min Feed motor power 0.33/0.55 kW Table adjustment motor power 0.25 kW Main drive motor power 11 kW Electric voltage 400 V Phase(s) 3 Ph Frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows machine with optional equipment Wide belt sander in dual-belt configuration up to 1100 mm with numerous equipment options for budget-conscious workshops Robust, tubular-reinforced monoblock steel frame with high-mounted working units for maximum rigidity Operator-friendly, clear control panel located at the front Motorized table height adjustment Digital display for working height Electronically controlled belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via gear motor with two speeds Flexible steel pressure bar ahead of the first unit Rubber pressure rollers, before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Quality - Made in Europe RTC Configuration 1st unit: Steel roller with spiral grooves, Ø 120 mm, with fine adjustment for calibration 2nd unit: Combination unit with fine height adjustment for calibration and fine sanding, equipped with a rubber-coated roller Ø 120 mm (45 Sh), and a hard sanding pad with graphite lining on a replaceable insert Scope of delivery: Table height adjustment with electronic height display Oscillation of sanding belts with electronic system Rubber-coated, grooved pressure roller at infeed, first position, with anti-backup device (C.E.) Star-delta starting of the main motors Grooved calibration steel roller Selector switch for positioning the sanding pad from the control panel Accessories: - Semi-hard flat sanding pad Bjdpfx Afecr S Ecsaowl - Automatic belt centering Location: In stock at Bitburg - special price

Stāvoklis: jauns, Ražošanas gads: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND SLOT MORTISER ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard version according to price list 01/19/D with: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor 1400/2800 rpm, 1.5 kW - Line laser with holder - Drilling unit, infinitely rotatable from the front (65°-0°-65°) - Position setting via digital counter Bjdoxdttpopfx Afaswl - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and cross adjustment 320 mm - Complete stop system consisting of: 1 central stop and 1 stop for oversize frames 1 stop bar approx. 850 mm long (can be swapped left/right) 2 flip stops - Slot mortiser unit, lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel, dust-tested, Ø 80 mm Double mitre fence adjustable 0°-60° Pneumatic X-axis clamping with on/off switch on indexing lever Pair of workpiece support arms, swiveling (left and right) Clamp column relocatable to the front Chassis with 4 rollers for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill Ø 25 mm, made of chrome steel, with centering tip Available: short notice

Stāvoklis: teju kā jauns (lietots), Ražošanas gads: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND MORTISE DRILLING MACHINE Complete in standard configuration according to price list 01/22/D, including: - Precision collet chuck for ER 40 collets, Ø 3-26 mm Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Max. drilling depth 150 mm - Precision indexing fence with 12 mm pitch, featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system, consisting of: 1 center stop and 1 stop for extra-wide frames 1 round stop bar, approx. 850 mm long (can be switched from left to right) 2 flip stops - Height-adjustable slot mortising unit with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Ø 80 mm extraction hood, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swivelling (left and right) Bwodpfxjxdttis Afajl Drill head mounting 3-spindle boring head, 32 mm pitch (can be rotated by 90°) Chassis with 4 castors, for easy machine mobility Available: at short notice – immediately –

Stāvoklis: ļoti labs (lietots), WEINIG Hydromat H23 Line, S/N 87321, Year 1999, Ref-No. 103437 WEINIG HighMech E-1 Cross Conveyor, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Bwjdjwvqklspfx Afael Planer/moulder with reinforced 3-sided KASCHWIG sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed (frequency-controlled): 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th universal spindle (4-sided): 11.0 kW • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors with NEW motor soft-start/brake units • Pneumatically-assisted top pressure rollers • Feed rollers D=140 mm • 6 powered rollers in the table • Spindle 1 + 6 + 7 + 8 + 9 with counter bearing • Spindle 8 + 9 with straight jointer • Spindle 8 + 9 with profile jointer • Spindle 6 + 8 pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed guides • Pneumatically-assisted side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing control cabinet • Operating manual, spare parts catalogue and circuit diagram • Machine is supplied without planer heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Brand new WEINIG components used: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL-bearings All motors newly mounted NEW electronic motor soft-start/brake units NEW hard-chromed table plates NEW hard-chromed guides Many other NEW PARTS installed in the machine Condition: see attached photos; technically in top (1A) condition Infeed mechanization unrefurbished – parts complete – fully functional Payment: In advance, net, prior to loading Delivery time: To be agreed Delivery terms: EXW Inspection: Possible at any time by appointment Subject to prior sale and errors.

Stāvoklis: teju kā jauns (lietots), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed speed: 12 – 120 m/min • Feed motor: 22.0 kW Bodpfx Aotynpxjfaswl • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors with electronic brake • BRAND NEW MILLING SPINDLES • Spindle diameter: ø 50 mm • Spindle speed: 6,000 rpm • 6 driven rollers in the table – hard-chrome plated • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2 + 3 + 8 + 9 fitted with straight jointer • Spindles 4 + 6 with pneumatic pressure • NEW feed rollers D=170 mm • Hard-chrome plated table plates • Hard-chrome plated fences • Heavy-duty pneumatic pressure rollers from above • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW standalone control panel, 5m cable • NEW standalone switch cabinet, 5m cable • Operating manual, spare parts list and wiring diagram + Many NEW spare parts/accessories included Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical values: • Total connected load: approx. 157 kW Condition: Machine as shown in the photos – technically as new Payment: Net cash before loading Delivery time: To be agreed Delivery terms: EXW Inspection: Possible at any time by appointment Offers/enquiries only accepted with complete company details provided Subject to prior sale and errors excepted.

Stāvoklis: lietots, Ražošanas gads: 2005, Nr. 3256 CNC Automatic Pallet Manufacturing System Sysmathick RPA9 + Stacker Used, year of manufacture: 2005, system already dismantled System for joining wooden components with top and bottom nailing The RPA9 is a machine equipped with circulating chains for producing pallets in standard sizes according to four templates (maximum 1600 x 1400 mm LxW) Operation via touchscreen Format changeover in just a few minutes Two programming modes: - Digital programming via PC (coordinate entry) - Manual programming via touchscreen Storage capacity for tens of thousands of products Automatic adjustment of inter-head distance (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top: 3x N58 & 3x N400, bottom: 3x N80) High nailing frequency (one row with three nails per second) Bwjdpfxox Dddxo Afajl Nailing of multi-layer pallets thanks to heads equipped with pneumatic cylinders Pneumatic pressing of boards during assembly Minimum pallet size: 600 x 300 mm LxW Maximum pallet size: 1600 x 1400 mm LxW Maximum template size: 1700 x 1600 mm LxW Maximum nailing capacity: 1600 x 1400 mm LxW Maximum pallet height: 190 mm Minimum pallet height: 110 mm Machine output: 60 - 200 pallets/hour Sale on behalf of customer, ex location near 51371 Leverkusen, without dismantling, transport, or installation Dismantling, loading, and transport by us available at extra cost Errors in description and price excepted To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale as-is Technical specifications, condition, year of manufacture, and scope of supply according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sold as viewed Pictures and videos are for illustration purposes only and may not represent actual scope of delivery Terms of payment: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Ražošanas gads: 2002, stāvoklis: labi (lietots), iekārtas/transportlīdzekļa numurs: HHNRW, Demag / CTI monorail system with 7 Demag DH hoists (ladle transport system from an aluminum foundry) Load capacity / lifting capacity: 6,300 – 7,000 kg / 6.3 + 7 tons Approx. 100 m running rail (CTI profile – modular system), without building structures, etc. 9 pneumatic switches, curve sections, various distribution boxes + control cabinets + pneumatic controls Documentation including circuit diagrams and inspection books available. Hoists are individually movable on the rail system; each hoist has its own control, including conductor rail system for power supply to the hoists. Fully two-stage traversable – fine lifting! Used condition – system was serviced/overhauled in 2018 at a cost of €155,000 (rails/hoists) Bodoh Ad Saopfx Afajwl The system is dismantled and immediately available (delivery volume approx. 20–25 tons, approx. 2 truck loads) Additional photos available on request – please inquire Shipping by freight forwarder possible, collection preferred Shipping costs within 500 km €1,400. For more precise costs, please provide your postal code!

Stāvoklis: jauns, Ražošanas gads: 2024, Funkcionalitāte: pilnībā funkcionāls, slīpēšanas platums: 1 350 mm, slīpēšanas augstums: 200 mm, augstuma regulēšanas veids: elektrisks, slīpēšanas lentes garums: 2 620 mm, slīpēšanas lentes platums: 1 400 mm, Heesemann Multi-Purpose Wide Belt Sander, Type HSM .4 NEW Edition RQHD ROLLER/CROSS/LONGITUDINAL DLB/DB-S Sanding width 1,350 mm Column construction with transport bed With continuous feed belt, feed speed adjustable 3 – 15 m/min via frequency inverter, workpiece thickness (3 – 200 mm) motorized adjustment Automatic workpiece thickness measurement at machine infeed Workpiece vacuum clamping system with adjustable vacuum for transport of workpieces shorter than 500 mm (feed direction), integrated fan with frequency converter, drive power 2.2 kW Non-driven rollers (2 each at machine infeed and outfeed) Industrial PC 15.6" (built-in) Multi-touch color display, CF card, Windows Embedded Standard OS, touch screen version, production and downtime display, Ethernet connection possible. Program storage for 100 programs Remote maintenance program Program for extraction flap control For extraction flaps/slides to be installed by the customer, external pneumatic valves with any external operating voltage (e.g. 115V AC / 230V AC / 24V DC) can be controlled via pre-installed potential-free relay contacts. MMI package includes: - Intuitive machine operation with self-explanatory symbols - LED strips at infeed and outfeed as operator assist (infeed for workpiece positioning for better use of sanding belt, outfeed indicates workpiece position) - Belt manager status display at the unit (screen) - Aggregate information with grit (screen) - Visualization of workpiece position as it passes through the machine - Video camera at machine outfeed 1 Contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speed: 24 m/s Bwsdpfxou Ic Rgs Afaol Drive power: 22 kW Diameter: 200 mm 1 Cross sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 – 20 m/s Drive power: 15 kW frequency inverter 1 Longitudinal sanding unit with pressure lamella belt system Sanding belt dimensions: 2,620 x 1,400 mm Belt speed: 1.8 – 9 m/s (with pressure lamella belt) 1.8 – 18 m/s (without pressure lamella belt) Drive power: 15 kW frequency inverter Infinitely variable belt speed settings, maintenance-free braking system, automatic compensation for possible different belt edge lengths, counter-rotating sanding belt operation, oscillating sanding belt cleaning, adjustable. 2 Pressure beams with computer-controlled selective pressure control system CSD® (10 year warranty) The electromagnetic CSD® system is maintenance-free, since it does not become contaminated as pneumatic elements do. 1 Rotating disc brush unit DB-S 10 driven disc brushes, working in two rotation directions, central height adjustment for abrasive wear, including quick-change system for disc brushes Brush trim: Flex-Trim Diameter: 150 mm Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply for belt monitoring in the event of temporary power interruption Energy Management System EMS Belt side: left Terminal: front left Workpiece blowing device LED lighting inside the machine (on belt side) Further information available upon request.

Stāvoklis: lietots, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: yes Weight: 3,300 kg Dimensions (L x W x H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sander + disc unit from above/below Manufacturer’s description: ----- Double-sided four-belt solid wood sanding machine for sanding timbers such as window scantlings, etc. Highly robust top specification with innovative details. Suitable for demanding continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for coarse, fine, and finish sanding, each from above and below 1st belt sanding unit with heavy steel roller 2nd belt sanding unit with rubber-coated roller and pad 3rd finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent heat conductivity and precise dimensional accuracy - External cooling of sanding zones for cooler sanding and increased belt service life - Positive-driven, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Fine dust extraction at tension rollers - Integrated brushing and finishing device with large dust extraction system - Motorised sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal on the lower side via precision lead screw with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension - Sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece feed via calibrated, non-slip conveyor belts over heavy cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, even workpiece feed - Feed drive motor with stepless speed 4-20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm, each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control unit (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg Bsdpfx Afevu Hgboaswl - Operating voltage: 400 V, 50 Hz, 3-phase - CE conformity Equipped with the following options: - 4-belt sanding belt blow-off via nozzles directly at the radii ...

Stāvoklis: lietots, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus #2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and thoroughly checked prior to delivery. Technical Data Overview (Please inquire separately for any additionally included accessories) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable, stepless > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for cut recognition > NC length stop, mounted on slot table included Cross-cut saw positioning integrated in the control system. > Length: 3,500 mm Item 2: Tenoning and slotting spindle ----- > Number of tools: variable, adjustment stepless via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb and counter rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm Bjdpjvu Hfqjfx Afaowl > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatic controlled, 2 positions. Muntin guiding system consisting of: Guide rail in the stop (area of climb-cut spindle), upper muntin support rail in the area of vertical right profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. cutting circle: 130 mm > Axial travel: 30 mm, 8 positions via pneumatic turret > Radial travel: 125 mm, 8 positions via pneumatic turret Item 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions via pneumatic turret > Radial travel: 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. cutting circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Network capable > Rebating device for tear-free rebating > Double piece package > Return conveyor for single-operator use: swing band > Screen control > Angled window machining device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type production program > Supplied without machining tools No original pictures currently available. Photos show an identical machine from our archives ----- Price for the above-mentioned machine on request! ----- Option at surcharge: EUR 6,500.00 Notice...