Dziļo caurumu urbšanas iekārtaLOCH Präzisions Bohrtechnik Gmbh
TB 1-4/E-600/2
Dziļo caurumu urbšanas iekārta
LOCH Präzisions Bohrtechnik Gmbh
TB 1-4/E-600/2
Sākuma cena bez PVN
39 000 €
Izgatavošanas gads
2000
Stāvoklis
Lietots
Atrašanās vieta
Ergolding 

Rādīt attēlus
Rādīt karti
Dati par iekārtu
- Mašīnas apraksts:
- Dziļo caurumu urbšanas iekārta
- Ražotājs:
- LOCH Präzisions Bohrtechnik Gmbh
- Modelis:
- TB 1-4/E-600/2
- Izgatavošanas gads:
- 2000
- Stāvoklis:
- pilnībā atjaunots (lietots)
Cena un atrašanās vieta
Sākuma cena bez PVN
39 000 €
- Atrašanās vieta:
- Am Industriegleis 2, 84030 Ergolding, DE
Zvanīt
Piedāvājuma informācija
- Ieraksta ID:
- A7615940
- Pēdējoreiz atjaunots:
- 23.9.2460942
Apraksts
LOCH Deep Drilling Machine TB 1-4/E-600/2 (completely overhauled used machine)
Working depth: max. 600 mm
Working diameter:
Solid drilling: 4 – 25 mm diameter in steel
Number of spindles:
2 deep drilling spindles, maintenance-free with lifetime grease lubrication
Drill spindle interface:
Short taper according to DIN 55027, size 5
Centre height: 250 mm
Centre distance: 203.2 mm
Drilling system: Single-lip deep hole drilling
Main drive:
2 x 5.5 kW drive power per spindle, infinitely variable via frequency-controlled AC motor, constant output across the full speed range.
Speed range: 1,000 – 6,000 rpm
Feed:
Infinitely variable via AC servo drive with ball screw
and backlash-free preloaded nut.
Feed range: 0 – 300 mm/min
Extended feed range available on request, up to max. 6,000 mm/min
Rapid traverse: 6,000 mm/min forward and reverse
Coolant supply:
Internal coolant delivery through the drill spindle with a carbide mechanical seal.
Spindle slide:
Robust construction with special spindle blocks, all spindle bearings are maintenance-free and lifetime lubricated.
Dcjdpoikqrfsfx Afkon
Guide system:
Machine bed with mounted, hardened and ground linear guides. Spindle slide moves on circulating antifriction elements for vibration-free feed without stick-slip effect.
Drill bushing holder:
Firmly connected to the machine base, with removable upper section for quick and easy change of drill bushings and coolant supply devices.
Machine base:
Heavily dimensioned welded construction, stress-relieved annealed.
Worktable:
Special cast iron table, fixed to the base, with T-slots. The central slot is aligned with the drilling axis and serves as a guide slot for clamping elements.
Control:
SIEMENS Sinumerik 840 D (retrofit)
Operation:
Single functions for machine setup via push-button control.
Semi-automatic operation with manual loading via program start.
Machine monitoring:
Displays spindle speed, feed, drilling depth, and coolant pressure.
Safety system:
The machine's working area is secured by a sliding door which is interlocked with the control system to prevent accidental or unauthorised opening during operation.
Electrical equipment:
All motors according to IEC standards.
Separate control cabinet housing all necessary safety and control systems for operation. The machine is operated from a conveniently positioned control panel within the working area.
The machine can be inspected and tested at any time by appointment.
FURTHER INFORMATION ON REQUEST
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Working depth: max. 600 mm
Working diameter:
Solid drilling: 4 – 25 mm diameter in steel
Number of spindles:
2 deep drilling spindles, maintenance-free with lifetime grease lubrication
Drill spindle interface:
Short taper according to DIN 55027, size 5
Centre height: 250 mm
Centre distance: 203.2 mm
Drilling system: Single-lip deep hole drilling
Main drive:
2 x 5.5 kW drive power per spindle, infinitely variable via frequency-controlled AC motor, constant output across the full speed range.
Speed range: 1,000 – 6,000 rpm
Feed:
Infinitely variable via AC servo drive with ball screw
and backlash-free preloaded nut.
Feed range: 0 – 300 mm/min
Extended feed range available on request, up to max. 6,000 mm/min
Rapid traverse: 6,000 mm/min forward and reverse
Coolant supply:
Internal coolant delivery through the drill spindle with a carbide mechanical seal.
Spindle slide:
Robust construction with special spindle blocks, all spindle bearings are maintenance-free and lifetime lubricated.
Dcjdpoikqrfsfx Afkon
Guide system:
Machine bed with mounted, hardened and ground linear guides. Spindle slide moves on circulating antifriction elements for vibration-free feed without stick-slip effect.
Drill bushing holder:
Firmly connected to the machine base, with removable upper section for quick and easy change of drill bushings and coolant supply devices.
Machine base:
Heavily dimensioned welded construction, stress-relieved annealed.
Worktable:
Special cast iron table, fixed to the base, with T-slots. The central slot is aligned with the drilling axis and serves as a guide slot for clamping elements.
Control:
SIEMENS Sinumerik 840 D (retrofit)
Operation:
Single functions for machine setup via push-button control.
Semi-automatic operation with manual loading via program start.
Machine monitoring:
Displays spindle speed, feed, drilling depth, and coolant pressure.
Safety system:
The machine's working area is secured by a sliding door which is interlocked with the control system to prevent accidental or unauthorised opening during operation.
Electrical equipment:
All motors according to IEC standards.
Separate control cabinet housing all necessary safety and control systems for operation. The machine is operated from a conveniently positioned control panel within the working area.
The machine can be inspected and tested at any time by appointment.
FURTHER INFORMATION ON REQUEST
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2022
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 871 9... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda