KASTO lentzāģis KASTOtec AC 4

KASTO KASTOtex AC 4

KASTOtec AC 4

Cutting capacity round: 430 mm
Cutting capacity square H x W: 430 x 430 mm
Cutting capacity flat H x W: 430 x 430 mm
Clamping range: 0 – 430 mm
Smallest dimension to be cut: 10 x 10 mm
Minimum cut-off length: 6 mm
Shortest remnant length in automatic mode (only with geometrically flawless surfaces): 35 mm
Shortest remnant length in single cut mode: 10 mm

Dimensions and Weight:
Length approx.: 2,140 mm
Width incl. chip conveyor: 4,610 mm
Height (saw frame lowered) approx.: 2,195 mm
Height (saw frame raised) approx.: 2,410 mm
Material support height: 700 mm
Total weight: 4,300 kg
Year of manufacture: 2003

Performance data:
Total connected load: 25 kW
Saw motor drive: 15 kW
Drive power at flywheel: 14 kW
Cutting speed, infinitely adjustable, 50/60 Hz version: 12 - 120 m/min
Automatic material feed length, single: 600 mm

Saw blade dimensions: 6,830 x 41 x 1.3 mm
Crodpoy Dckmjfx Alxeh

Coolant tank volume: 150 l

KASTOtec AC 4

Fully hydraulic heavy-duty automatic bandsaw
For cutting round, square, and flat materials, as well as tubes and profiles of all grades, especially for tool steels and materials difficult to machine such as titanium, Hastelloy, Inconel, etc.

Machine base

Torsion-resistant welded construction

Saw unit made of steel-mineral cast composite construction

Guidance of the saw unit

High-performance sawing technology requires the use of backlash-free and low-maintenance guide systems. Two vertically-oriented square guide columns, one linear guidance unit with backlash-free adjusted slide carriages, and two preloaded, adjustable rollers on a guiding rail ensure high rigidity and cutting precision. Greater machining performance, shorter cutting times, higher band life, low-maintenance guidance system, and high availability are the hallmarks of the new KASTOtec.

Saw blade guidance

Side guiding via hydraulically preloaded carbide slide guides, with quick-lift device for rapid blade change.
Back guide via pendulum-mounted carbide slide guides. Automatic adjustment of the movable blade guide according to the width of material to be sawn.

Material quick-lift device

After the sawing process in the automatic cycle, the material is lifted approx. 2 mm from the feed-side saw band by a material quick-lift device while clamped (to increase blade life).

Machine options
Carbide package
Coolant monitoring
Blade tracking
Speed monitoring
Machine light
Roller track
CNC control
Special chip conveyor
Carbide package

Discharge roller track for KASTOtec AC 4 available in stock with dimensions: 1200 mm length, 500 mm support width, 6 transport rollers

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.