Atvērta puspiekabe ar tentuDINKEL
3-Achs-Sattelanhänger, Pritsche+Plane, LBW
Atvērta puspiekabe ar tentu
DINKEL
3-Achs-Sattelanhänger, Pritsche+Plane, LBW
Stāvoklis
Lietots
Atrašanās vieta
Essen 

Dati par iekārtu
Cena un atrašanās vieta
- Pārdevēja atrašanās vieta:
- Heegstraße 6-8, 45356 Essen, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 31 710 kg
- Kopējais svars:
- 42 000 kg
- Asu konfigurācija:
- 3 asis
- Pirmā reģistrācija:
- 10/2016
- Kopējais platums:
- 2 550 mm
- Aprīkojums:
- ABS
Piedāvājuma informācija
- Sludinājuma ID:
- A21746438
- Atsauces numurs:
- 37809
- Atjaunināšana:
- pēdējo reizi 01.05.2026
Apraksts
You can find our entire range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment features. Complete specification available on request.
- Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm
- 24,000 kg telescopic support winches with load and fast operation modes
- Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations
- 8 stake pocket inserts (for 2nd bulkhead)
- Aluminum roof girders with sliding tarpaulin
- Rear stakes extendable to approx. 3,500 mm (for loading and unloading only)
- Three sliding stanchions on each side
- End stanchions extendable lengthwise in direction of travel
- Complete front wall designed as storage compartment with integrated shelving system, interior closed
- DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only
- Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting
- Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift)
- Upper rear portal crossbar with movable sliding tarpaulin
- Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals
Hjdey Dy Ehjpfx Amionl
- WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV
- ECAS air suspension with raise/lower function
- Wabco Smart Board with axle load display and hubodometer
- 3 x 10,000 kg SAF axles with drum brakes
- 3rd axle: friction-steered trailing axle
- 1st axle liftable
- Tires: 235/75 R 17.5
- Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm
- Hydraulic auxiliary stabilizers with automatic ground leveling
- Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg
- Chassis painted in MB nova grey
- White bodywork with customer-specific tarpaulin lettering
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Excerpt from the equipment features. Complete specification available on request.
- Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm
- 24,000 kg telescopic support winches with load and fast operation modes
- Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations
- 8 stake pocket inserts (for 2nd bulkhead)
- Aluminum roof girders with sliding tarpaulin
- Rear stakes extendable to approx. 3,500 mm (for loading and unloading only)
- Three sliding stanchions on each side
- End stanchions extendable lengthwise in direction of travel
- Complete front wall designed as storage compartment with integrated shelving system, interior closed
- DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only
- Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting
- Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift)
- Upper rear portal crossbar with movable sliding tarpaulin
- Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals
Hjdey Dy Ehjpfx Amionl
- WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV
- ECAS air suspension with raise/lower function
- Wabco Smart Board with axle load display and hubodometer
- 3 x 10,000 kg SAF axles with drum brakes
- 3rd axle: friction-steered trailing axle
- 1st axle liftable
- Tires: 235/75 R 17.5
- Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm
- Hydraulic auxiliary stabilizers with automatic ground leveling
- Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg
- Chassis painted in MB nova grey
- White bodywork with customer-specific tarpaulin lettering
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2003
78 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 201 8... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda




















