Mobilais palešu iesaiņotājs

ATLANTA - mobiler StretchWickler SFERA Easy PowerStretch 120-400%

Stretch Wrapper ATLANTA SFERA Easy
6 individually programmable wrap cycles
Wrapping height: 2150 mm
Mast height: 2050 mm (fits through almost any doorway)
Film power stretch: 120–400%
Motorized pre-stretch system with infinitely variable settings
Pre-stretch ratio adjustable via control panel from 120% to 400%
Film application tension electronically monitored via control unit
IEF quick-loading system for easy film roll changes
Film specification: max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm
Film tension can be stored in 4 steps
Geomagnetic compass GMK, always stops in the initial position
Manual rope formation at the film carriage for reinforcing the wrapping

TECHNICAL DETAILS:
Two maintenance-free AGM batteries 12 V – 100 Ah, connected in series
Gbodpfx Acjrqgivoueu
160 pallets per charge – charging time: 8–10 hours
High-frequency battery charger with LED indicator
Wrapping height (machine with mast incl. pallet): 2,150 mm
Height detection via photoelectric sensor or direct input via display
Protective bar for drive emergency stop
Emergency stop button according to CE regulations
Audible warning signal and warning light on machine start
Fall protection for film carriage
Push buttons for start & stop
Machine operation complies with CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON CONTROL PANEL:
All function parameters adjustable via display
F00 – Display lock for program changes
F02 – Adjustable machine speed around the pallet, up to 80 m/min
Carriage lifting speed up and down independently adjustable
F03 – Lifting carriage upward speed: 1.3 to 5.4 m/min
F04 – Lifting carriage downward speed: 1.3 to 5.4 m/min
F05 – Number of wraps at pallet base (1–10 wraps)
F06 – Number of wraps at pallet top (1–10 wraps)
F09 – Setting pallet wrapping height
F13–F16 – Film application tension for foot & top wrap/ascent & descent independently adjustable
F17–F20 – Film pre-stretch for foot & top wrap/ascent & descent independently adjustable
F62 – Ergonomic height for film change
Film consumption display (option for PRS – PS)

ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL:
6 storable wrapping programs for SFERA EASY
F01-1: Cross wrapping (up/down)
F01-2: Simple wrapping (up only or down only)
F10–F11: Wrapping cycle with predefined start and stop height
F12: Wrapping to preset height (disabling light sensor for height)
F21: Wrapping cycle for large-size pallets
F22/F23: Wrapping cycle for top sheet application
F29: Soft start cycle for edge protection application
F30–F31: Wrapping cycle with reinforcement and adjustable wrap count
Soft start for reducing film tearing on sharp pallet edges
Wrapping cycle with manual or motor-driven rope formation (optional)

Additional machines available from stock in Ludwigsburg.
Was a customer replacement unit.
Excellent condition.
Immediately available.
Inspection in Ludwigsburg possible by arrangement.

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.