5 asu apstrādes centrs

+GF+ MIKRON HPM 1350U

+GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture: 2009)

Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probe.

Operating Hours (Readout):
- Control on: approx. 112,194 h
- Machine on: approx. 72,272 h
- Spindle on: approx. 21,786 h
- Programs: approx. 21,654 h

Condition:
Used machine with typical signs of use, technically fully functional. Inspection under power possible by arrangement.

Work Areas
Traverses:
- X-axis: 1350 mm
- Y-axis: 1150 mm
- Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle)

Spindle
- Standard spindle 15,000 rpm
- Speed range: 0–15,000 rpm
- Acceleration time to max. speed: approx. 2.5 sec
- Power: 38 kW (S6 = 40% duty cycle, 2 min period)
- Torque: 193 Nm (S6 = 40% duty cycle)
- Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871)
- Max. tool diameter: 130 mm (full)
- Bearing: Ceramic-hybrid Ø 70 / Cronidur-St
- Lubrication: Lifetime lubricated
- Cooling: Water cooled with corrosion inhibitor

Feed Drives
- Feed motors: AC
- Rapid traverse/work feed:
- 32 m/min (20% duty cycle)
- 10 m/min (100% duty cycle)
- max. 15 m/min (40% duty cycle per hour)
- Position measurement systems X/Y/Z: Direct linear encoders

Rotary Table
- Clamping surface: Ø 1100 × 1000 mm, flattened on side
- Table load: 1600 kg
- T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm distance)
- Centering bore: Ø 50 H6
- Clamping torque: 8000 Nm
- Max. mass moment of inertia: 75 kg·m²
- Table lift above floor: 1120 mm
- Table drive: Torque motor, direct
- Drive torque: 1600 Nm (40% duty cycle, 2 min)

Swivel Axis (A-axis)
- NC swivel range: +16° to −120°
- Measuring system: direct, absolute
- Clamping principle: hydraulic, stepless
- Max. swivel speed: 4000°/min
- Max. working swivel torque: 600 Nm (S6 40%)
- Swivel time 0° → 90°: 0.9 s

Tool Magazine / Changer
- 46-position magazine (installed per documents)
- Magazine positions: 46
- Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40
- Max. tool diameter:
- 80 mm if fully loaded
- 130 mm partially loaded
- Max. tool length: 300 mm
- Max. tool weight: 8 kg
- Magazine load: 200 kg
- Tool-to-tool (vertical): 11 s

Coolant / Chip Conveyor
- External coolant supply (AKZ): 40 l/min, 2.5 bar
Ihjdpfxex Eh Iqs Adqow
- Internal coolant supply (IKZ)

Electrical Data:
- Installed power: 75 kW
- Connected load: 58 kW
- Connection value: 64 kVA
- Control voltage: 24 V DC
- Operating voltage: 3 × 400 V, 50 Hz
- Protection rating: IP54

Dimensions & Weight
- Machine weight: approx. 12,600 kg (without accessories)
- Required space (L × W × H): 5605 × 4290 × 3150 mm

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.