Automašīnu pārvadātājsVOLVO
Arbeitsbühnen Baumaschinentransporter mit Rampen
Automašīnu pārvadātājs
VOLVO
Arbeitsbühnen Baumaschinentransporter mit Rampen
fiksēta cena bez PVN
224 500 €
Izgatavošanas gads
2025
Stāvoklis
Jauns
Atrašanās vieta
Petershagen 

Rādīt attēlus
Rādīt karti
Dati par iekārtu
Cena un atrašanās vieta
fiksēta cena bez PVN
224 500 €
- Pārdevēja atrašanās vieta:
- Auf der Tappenau 15, 32469 Petershagen, Vācija

Zvanīt
Tehniskā informācija
- Nobraukums:
- 100 km
- Jauda:
- 375 kW (509,86 zs)
- Degvielas veids:
- dīzeļdegviela
- Kopējais svars:
- 32 000 kg
- Asu konfigurācija:
- 3 asis
- Krāsa:
- balts
- Pārnesuma veids:
- automātisks
- Emisijas klase:
- Euro 6
- Krautuves garums:
- 9 000 mm
- Iekraušanas vietas platums:
- 2 550 mm
- Aprīkojums:
- ABS, gaisa kondicionēšana, navigācijas sistēma, stāvvietas sildītājs
Piedāvājuma informācija
- Ieraksta ID:
- A19742025
- Pēdējoreiz atjaunots:
- 14.1.2461055
Apraksts
4-axle Volvo machine transporter/platform lift transporter
- FH 500 8x2R
- Tag axle, electro-hydraulically steered, single tires
- Rear axle suspension with air suspension: 1 drive axle, 1 tag axle
- FH high safety long-distance cab
- Cab auxiliary heater, 2 kW
- 33 l refrigerator with freezer compartment under the bunk
- Air suspension on front axle(s)
- Transmission/I-Shift operation via control unit on driver's seat
- I-Shift driving modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic data
- Eco cruise control (cruise control) including brake cruise
- Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control
- Adaptive Cruise Control (ACC) with collision warning and emergency braking
- Lane keep assist
- Side collision avoidance and turning assistant (both sides)
- Driver alert system warns of fatigue
- VEB Volvo Engine Brake
- etc.
WIESE body for platform lift and construction machinery transport with hydraulic loading ramps
Includes 2 pairs of wheel recesses incl. wheel recess covers
Body dimensions:
- Length approx. 9,050 mm useable length
- External width 2,550 mm
- Loading height top of floor approx. 1,050 mm unladen
- Sturdy, weight-optimized welded steel construction, box section design
- Short crossmember spacing for high point loads
- Rear end tapered for low approach angle
- Outer frame profile 90°
- Front bulkhead reinforced version
- Storage box inside front lower area
- Grated floor
- Designed for 5,000 daN wheel load
- Steel toolboxes above the axles and outer frame with anti-slip coating
Load securing:
- 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame
- Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t
- 4 lashing points 8 t recessed at rear (left/right/center/center)
- 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center)
Hfodpfxsw Itmlj Adleb
- Outer frame profile 90°
Loading ramps:
Type: WFB 20 S-2
Capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramps as 2 individual/extendable ramps, both ramps laterally adjustable
- Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay
- Sturdy locking bar as transport security (optionally with belt system)
- 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab
- Ramp and support operation by electro-hydraulic system
- Control via wireless remote and emergency controls on manifold
- Control manifold mounted in stainless steel toolbox on chassis side
- Superwinch winch 8.2 t with approx. 20 m steel cable
- Access steps with handrail right and left for deck access
- 5 stainless steel toolboxes in drawer version, with lighting as optional extra
- Side skirts as per sample photos (green vehicle) as optional extra
- Body coating KTL
- Ball-type trailer hitch at rear, 3.3 t
- 4 LED work lights
- 2 LED rear lights mounted at top of bulkhead
- 4 LED work lights on outer chassis as perimeter lighting
- 2 LED work lights at rear
- 1 removable beacon at rear
The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
- FH 500 8x2R
- Tag axle, electro-hydraulically steered, single tires
- Rear axle suspension with air suspension: 1 drive axle, 1 tag axle
- FH high safety long-distance cab
- Cab auxiliary heater, 2 kW
- 33 l refrigerator with freezer compartment under the bunk
- Air suspension on front axle(s)
- Transmission/I-Shift operation via control unit on driver's seat
- I-Shift driving modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic data
- Eco cruise control (cruise control) including brake cruise
- Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control
- Adaptive Cruise Control (ACC) with collision warning and emergency braking
- Lane keep assist
- Side collision avoidance and turning assistant (both sides)
- Driver alert system warns of fatigue
- VEB Volvo Engine Brake
- etc.
WIESE body for platform lift and construction machinery transport with hydraulic loading ramps
Includes 2 pairs of wheel recesses incl. wheel recess covers
Body dimensions:
- Length approx. 9,050 mm useable length
- External width 2,550 mm
- Loading height top of floor approx. 1,050 mm unladen
- Sturdy, weight-optimized welded steel construction, box section design
- Short crossmember spacing for high point loads
- Rear end tapered for low approach angle
- Outer frame profile 90°
- Front bulkhead reinforced version
- Storage box inside front lower area
- Grated floor
- Designed for 5,000 daN wheel load
- Steel toolboxes above the axles and outer frame with anti-slip coating
Load securing:
- 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame
- Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t
- 4 lashing points 8 t recessed at rear (left/right/center/center)
- 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center)
Hfodpfxsw Itmlj Adleb
- Outer frame profile 90°
Loading ramps:
Type: WFB 20 S-2
Capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramps as 2 individual/extendable ramps, both ramps laterally adjustable
- Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay
- Sturdy locking bar as transport security (optionally with belt system)
- 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab
- Ramp and support operation by electro-hydraulic system
- Control via wireless remote and emergency controls on manifold
- Control manifold mounted in stainless steel toolbox on chassis side
- Superwinch winch 8.2 t with approx. 20 m steel cable
- Access steps with handrail right and left for deck access
- 5 stainless steel toolboxes in drawer version, with lighting as optional extra
- Side skirts as per sample photos (green vehicle) as optional extra
- Body coating KTL
- Ball-type trailer hitch at rear, 3.3 t
- 4 LED work lights
- 2 LED rear lights mounted at top of bulkhead
- 4 LED work lights on outer chassis as perimeter lighting
- 2 LED work lights at rear
- 1 removable beacon at rear
The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2005
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 5704 ... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Petershagen
1 126 km
Evakuators
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
Mazā sludinājuma
HETEREN
1 333 km
Autokrāna kravas automašīna
VolvoFMX 500 FMX 500 8x2 Euro 6 Effer 395-8S
VolvoFMX 500 FMX 500 8x2 Euro 6 Effer 395-8S
Mazā sludinājuma
Petershagen
1 126 km
Automobilis ar plakanu platformu
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
Mazā sludinājuma
Massing
1 239 km
Pacelšanas platforma
Denka-LiftDL 30
Denka-LiftDL 30
Mazā sludinājuma
Massing
1 239 km
Pacelšanas platforma
Denka-LiftDL 30
Denka-LiftDL 30
Mazā sludinājuma
Spānija
2 475 km
Mini ekskavators
DoosanDX85R-3
DoosanDX85R-3
Mazā sludinājuma
Turcija
1 966 km
JCB JS290 garas darbības stieņa rokas ražošana
JCBJS290 Long Reach Boom-Arm Manufacturing
JCBJS290 Long Reach Boom-Arm Manufacturing
Mazā sludinājuma
Aichach
1 303 km
Automašīnu pārvadātājs
IVECOAS320S50 Baumaschinentransporter hydr. Rampe
IVECOAS320S50 Baumaschinentransporter hydr. Rampe
Mazā sludinājuma
Petershagen
1 126 km
Evakuators
MANBaumaschinen- Arbeitsbühnentransporter Rampen
MANBaumaschinen- Arbeitsbühnentransporter Rampen
Mazā sludinājuma
Spānija
2 475 km
Mini ekskavators
DaewooSO75 V PLUS
DaewooSO75 V PLUS
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda






























































































































































