Namdara

Krüsi CM40

KRÜSI Chalet Construction Machine / Log House Manufacturing Plant Type CM 40
Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR
Year of manufacture: 1996

Condition: Good, technically inspected and cleaned / ready for operation

Operating Principle
Processing of structural timber for chalet construction / log house manufacturing. Beams can be processed in one pass.

• Cutting to length
• Horizontal and vertical milling of shoulders / grooves in a single clamping
• Drilling
• Milling of end grooves

Workpiece:

• Maximum cutting height: 200 mm
• Maximum cutting width: 250 mm

Robust construction in welded design.
Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball bearing rollers.

Working range up to 200 x 250 mm. Fully operational, equipped with contactor control system, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with safety guards, central connection for customer-side chip extraction, with 2 eccentric clamps, without milling tools (rebating cutter).
Equipped with hydro-pneumatic horizontal and vertical feed, electrically controlled, synchronized with the start of the milling motors.
Rapid traverse and feed rate infinitely adjustable. Fully wired and installed, including air service unit.
Blanks with over 14 cm thickness must be machined in two clamping steps. Such blanks must be fed forward for finishing according to the excess thickness.
Machine protection hoods over moving parts with gas spring weight compensation.

Machine Description / equipped with:

Nsdpfx Aou Uh T Deg Noli
1. Saw Unit:
Manual feed
Spindle adjustment with analogue display
Saw blade Ø max. / Borehole Ø: 400 / 30 mm
Tungsten carbide tipped with chip depth limiter (same direction of rotation)
Adjustable riving knife
Motor speed min⁻¹ / 2900
Power: kW 2.2

2. CM Milling Unit (Log house unit)
Hydro-pneumatic feed
Spindle adjustment with digital display
Horizontal milling unit:
Cutter Ø 180 mm
Cutter width max. 130 mm
For cutter widths over 60 mm, only use cutters made of aluminium alloy with indexable inserts
2 motors, hydro-pneumatic feed, kW each 2.2
Hydro-pneumatic feed
Rapid traverse and working feed infinitely adjustable

3. Drilling Unit:
Manual feed
Spindle adjustment with analogue display
Collet chuck: ER 25
Clamping Ø max.: 16 mm
Drill bit Ø max.: 32 mm
Motor min⁻¹ 1450, kW 1.8

4. End Milling Unit
Hydro-pneumatic feed
Spindle adjustment with digital display
Cutter Ø max.: 230 mm
Cutter width max.: 60 mm
Motor min⁻¹ / 2900, kW 3.0
2 V-belts SPZ 9.5 x 1000 La

Pneumatics
Operating pressure (customer supply) min./max. MPa (bar): 0.7/1 (7/10)
Air consumption Nm³/h: 8

Electrics
Operating voltage V/Hz: 380, 50
Rated power kW: 8.8–15.8 (depending on version)
Customer-side fuse: 3 x 25 A slow-blow
Simultaneous load max. kW: 4.4

Dimensions
Machine width: 2400 mm
Machine depth: 1600 mm
Total height, guard closed: 1600 mm
Total height, guard open: 2200 mm
Extraction port Ø: underfloor extraction

Weight approx. 1300 kg

Incl. roller conveyor 2 x 6 m (2 x 4 m)

Technical data subject to change!

Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.