Citi

Fliegl SES 210 Schatzträger für LKW Transport

Custom-made transport solution (illustrated vehicle is for example only). Production and equipment tailored to customer requirements.

Further information:
Chassis: Low-loader semi-trailer
Steel welded construction, kingpin plate with interchangeable 2 kingpins, low bed sloping from the wheel area to the gooseneck to a loading height of approx. 210 mm, rear sloping to the wheel area, mounting rail for aluminum ramps at the rear across the entire width.
Chocks + holder
Aluminum side protection
Wheel cover with galvanized steel sheet, removable
1 towing eye at the rear, 10 tons.
Spare wheel + bracket on the front bulkhead / storage box on the outside front
Steel storage box on the gooseneck at the front across, approx.: L = 2400 mm, W = 400 mm, H = 600 mm, lockable
Electric winch, 24 volts, pulling force 8165 kg, mounted at the front on the gooseneck behind the storage box on the loading area, operated with a wireless remote control, cable length 35 m x approx. 10 mm, with pulley cable guide and 2 removable guide rollers on the gooseneck and rear slope. NATO socket on the connecting plate
1 pair of wheel recesses, approx. 700 mm, starting at the gooseneck, recessed into the floor, open to the outside. Note: Main frame protrudes approx. 145 mm. 4 pairs of socket positions for wheel stops (Fliegl standard), without wheel stops for parking the semi-trailer, approx. 100 mm high and approx. 100 mm long.
Wheel stops, plug-in type
When transporting heavy-duty modules (HDS), a spacer of approx. 50 mm is inserted in the front wheel recesses. Recess for the wheel stop, approx. 50 mm high, approx. 1200 mm long, approx. 500 mm wide
Tie-down points, low-loader
2 pairs of 2.5-ton tie-down points on the gooseneck, 7 pairs of tie-down loops recessed on the top and side in the outer frame, each 10 tons, 4 pairs of 10-ton tie-down points recessed on the top in the main frame longitudinal beam. 1 screw-in tie-down point with 6.7 tons each (JDT) in the middle at the rear in the ramp storage compartment. 1 folding tie-down point additionally at the front in the low bed, each 10 tons.
Axle + suspension
SAF drum brake axle,
Air suspension with raise and lower valve
Wheels and tires
235/75R17.5 from leading manufacturers
Steel rims in twin arrangement, factory silver
Braking system
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, without connecting line
EBS, electronic braking system with EBS socket at the front, without connecting cable
Warning: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS!
Electrical system
24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED,
2 white position lights at the front in LED
2 white/red side marker lights at the rear in LED
2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable
LED rotating beacon + holder, switched on via parking lights
Additional LED work light, at the rear, switched on via reversing light
Hnodpfxei Ri Hkj Apwjn
Floor
Gooseneck with steel / non-slip sheet
Low-loader floor, steel perforated sheet, steel / non-slip sheet covering in the wheel well area and removable sheet covering in the wheel arch area
Rear slope with steel perforated sheet
Side panels
Aluminum, 400 mm high, on the side of the gooseneck, plug-in, approx. 2500 mm long
Rear panel aluminum, 400 mm high, on the gooseneck, plug-in
Loading ramps
Pair of aluminum load

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.