Plakanā platforma / brezenta plēveFliegl
SDS 390 RoadRunner
Plakanā platforma / brezenta plēve
Fliegl
SDS 390 RoadRunner
EXW fiksēta cena bez PVN
9 900 €
Izgatavošanas gads
2015
Stāvoklis
Lietots
Atrašanās vieta
Triptis 

Rādīt attēlus
Rādīt karti
Dati par iekārtu
- Mašīnas apraksts:
- Plakanā platforma / brezenta plēve
- Ražotājs:
- Fliegl
- Modelis:
- SDS 390 RoadRunner
- Sērijas numurs:
- WFDFLT33902017848
- Izgatavošanas gads:
- 2015
- Stāvoklis:
- lietots
- funkcionalitāte:
- pilnībā funkcionāls
Cena un atrašanās vieta
EXW fiksēta cena bez PVN
9 900 €
- Atrašanās vieta:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE
Zvanīt
Tehniskā informācija
- Kopējais svars:
- 35 000 kg
- Tukšais svars:
- 6 537 kg
- Maksimālā kravnesība:
- 28 463 kg
- Asu konfigurācija:
- 3 asis
- Krautuves garums:
- 13 650 mm
- Iekraušanas vietas platums:
- 2 480 mm
- Iekraušanas telpas augstums:
- 2 790 mm
- Pirmā reģistrācija:
- 10/2015
- Krāsa:
- sudraba
- Riepas izmērs:
- 385/65 r22.5
Piedāvājuma informācija
- Ieraksta ID:
- A9058631
- Atsauces Nr.:
- 37357
- Pēdējoreiz atjaunots:
- 06.5.2460802
Apraksts
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Fodpfx Acekyrmiouopn
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Fodpfx Acekyrmiouopn
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2006
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 36482... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda