Piekabe ar plakano virsbūvi un brezentuFLIEGL
SDS 390 Gardine Standard Ultralight Coil
Piekabe ar plakano virsbūvi un brezentu
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW fiksēta cena bez PVN
25 990 €
Izgatavošanas gads
2021
Stāvoklis
Lietots
Atrašanās vieta
Triptis 

Rādīt attēlus
Rādīt karti
Dati par iekārtu
- Mašīnas apraksts:
- Piekabe ar plakano virsbūvi un brezentu
- Ražotājs:
- FLIEGL
- Sērijas numurs:
- WFDFLT33902029406
- Izgatavošanas gads:
- 2021
- Stāvoklis:
- teju kā jauns (lietots)
- funkcionalitāte:
- pilnībā funkcionāls
Cena un atrašanās vieta
EXW fiksēta cena bez PVN
25 990 €
- Atrašanās vieta:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE
Zvanīt
Tehniskā informācija
- Kopējais svars:
- 35 000 kg
- Tukšais svars:
- 5 800 kg
- Maksimālā kravnesība:
- 29 200 kg
- Asu konfigurācija:
- 3 asis
- Krautuves garums:
- 13 650 mm
- Iekraušanas vietas platums:
- 2 480 mm
- Iekraušanas telpas augstums:
- 2 790 mm
- Pirmā reģistrācija:
- 12/2021
- Piekares sistēma:
- gaisa pacēlājs
- Krāsa:
- sudraba
- Riepas izmērs:
- 385/65 R22.5"
Piedāvājuma informācija
- Ieraksta ID:
- A19083991
- Atsauces Nr.:
- 59340
- Pēdējoreiz atjaunots:
- 06.5.2460802
Apraksts
The images are archived; the vehicle may still be in use!
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
Gkedpjwhp A Dsfx Acuec
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
Gkedpjwhp A Dsfx Acuec
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
without lift axle
These images are archive images; the vehicle may still be in use!
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2006
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 36482... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda