Darba platformas puspiekabeFAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
Darba platformas puspiekabe
FAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
Stāvoklis
Lietots
Atrašanās vieta
Essen 

Dati par iekārtu
Cena un atrašanās vieta
- Pārdevēja atrašanās vieta:
- Heegstraße 6-8, 45356 Essen, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 44 420 kg
- Kopējais svars:
- 53 000 kg
- Asu konfigurācija:
- 3 asis
- Pirmā reģistrācija:
- 04/2025
- Nākamā pārbaude (TÜV):
- 04/2026
- Krautuves garums:
- 11 500 mm
- Kopējais platums:
- 2 540 mm
- Aprīkojums:
- ABS
Piedāvājuma informācija
- Sludinājuma ID:
- A21520922
- Atsauces numurs:
- 37347
- Atjaunināšana:
- pēdējo reizi 17.03.2026
Apraksts
You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full specifications available upon request.
Cargo Area:
* Cargo deck with approximately 30 mm thick hardwood floor
* 9 pairs of folding lashing rings (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes
Landing Legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data.
Credpjyu Eu Ijfx Afwsf
Axles and Suspension:
* BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable
* Air suspension with raise and lower valve
Braking System:
* WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical System:
* Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically blast-cleaned after welding using a shot-blasting system
* Second blast cleaning with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims painted silver-grey
* Paint system tested by salt spray test to ISO 9227-NSS
* Sealant wax applied to cavities
Included Accessories:
* Cargo deck with approx. 30 mm thick hardwood floor
* 2” kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* At galvanized front connection bar: DUOMATIC air couplings
* Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear
* At gooseneck and rear plate, left and right, each with a holder for warning plates including socket
* White reflective tape according to EU regulations on sides and red at the rear
* 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck
* European reflective markers (red/yellow) on trailer rear
* Bracket for rotating beacon at the rear of trailer
* Mudflap at the rear of trailer
* Manual and documentation on USB stick
* Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard
* 4 wheel chocks with holder at front wall
* Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit)
* Electro-hydraulic power pack
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes
* One INOX toolbox, approx. 1,200 x 460 x 55
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Excerpt from the equipment list. Full specifications available upon request.
Cargo Area:
* Cargo deck with approximately 30 mm thick hardwood floor
* 9 pairs of folding lashing rings (LC 10,000 daN)
* 10 pairs of stake pockets in the outer frame for approx. 100 x 50 mm plug-in stakes
Landing Legs:
* Hydraulic landing legs
Tyres:
* Tyres 385/65 R 22.5 – MICHELIN MULTI High Load 164K
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via standardized EBS interface per ISO 11992. For correct display, the truck must be equipped to transmit and display this data.
Credpjyu Eu Ijfx Afwsf
Axles and Suspension:
* BPW axles, technical axle load 10,000 kg each; first axle hydro-mechanically steered, second fixed, third hydro-mechanically forced steering, mounted on turntable
* Air suspension with raise and lower valve
Braking System:
* WABCO braking system per EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Electrical System:
* Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets in accordance with ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Structure:
* High-strength fine-grain steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically blast-cleaned after welding using a shot-blasting system
* Second blast cleaning with corundum for optimal coating adhesion
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Deep Black per RAL system 841GL
* Rear section metallized and painted in RAL 9010 (Pure White)
* Rims painted silver-grey
* Paint system tested by salt spray test to ISO 9227-NSS
* Sealant wax applied to cavities
Included Accessories:
* Cargo deck with approx. 30 mm thick hardwood floor
* 2” kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* At galvanized front connection bar: DUOMATIC air couplings
* Storage for approx. 1,000 mm plug-in stakes in the center beam at the rear
* At gooseneck and rear plate, left and right, each with a holder for warning plates including socket
* White reflective tape according to EU regulations on sides and red at the rear
* 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the outer frame of the cargo deck
* European reflective markers (red/yellow) on trailer rear
* Bracket for rotating beacon at the rear of trailer
* Mudflap at the rear of trailer
* Manual and documentation on USB stick
* Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard
* 4 wheel chocks with holder at front wall
* Rear and front steering can be operated by cable remote control with push buttons, featuring axle single-track control (without installation in tractor unit)
* Electro-hydraulic power pack
* 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high
* 5 pairs of crosswise mounted stake pocket rails in load floor for approx. 100 x 50 mm plug-in stakes
* One INOX toolbox, approx. 1,200 x 460 x 55
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2003
76 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 201 8... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Essen
1 291 km
Darba platformas puspiekabe
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
Mazā sludinājuma
Gusselby
629 km
Gaisa kompresors
Atlas CopcoGA-37
Atlas CopcoGA-37
Mazā sludinājuma
Lüdenscheid
1 270 km
Skrūvju ražošanas iekārta
HilgelandCH1 KHA
HilgelandCH1 KHA
Mazā sludinājuma
Vācija
1 120 km
Kompresors
Kaeser/Atlas CopcoCS75/AS44/BS60/GA45/TD51/TF171/TE76
Kaeser/Atlas CopcoCS75/AS44/BS60/GA45/TD51/TF171/TE76
Mazā sludinājuma
Hohenems
1 462 km
Skrūvju kompresors GA30VSD+FF
Atlas CopcoGA30VSD+FF
Atlas CopcoGA30VSD+FF
Mazā sludinājuma
Hessisch Lichtenau
1 155 km
Skrūves kompresors Kompresors
KaeserASD 32 mit Wärmerückgewinnung
KaeserASD 32 mit Wärmerückgewinnung
Mazā sludinājuma
Albias
2 153 km
Eļļas iesmidzināšanas rotācijas skrūves kompresors ar integrētu aukstumaģenta žāvētāju ATLAS COPCO G
ATLAS COPCOGA15 FF
ATLAS COPCOGA15 FF
Mazā sludinājuma
Stawiec
760 km
Skrūves kompresors
ATLAS COPCOGA22FF
ATLAS COPCOGA22FF
Mazā sludinājuma
Oelde
1 201 km
Atlas Copco GA7-13 VSD
Atlas CopcoGA7- 13 VSD
Atlas CopcoGA7- 13 VSD
Mazā sludinājuma
Essen
1 291 km
Darba platformas puspiekabe
FAYMONVILLEFaymonville Telemax Sattelauflieger - 2fach tele
FAYMONVILLEFaymonville Telemax Sattelauflieger - 2fach tele
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda
































































































