Avārijas elektroenerģijas ģenerators

BGG - Deutschland EPS-C40 770S

EPS-C40 770S – 72h Container Emergency Power Supply System:

AVAILABLE IMMEDIATELY!!!!

GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS
Rated Power PRP: 700.0 kVA, 560.0 kW, Power Factor cos Phi = 0.8
Rated Power LTP: 770.0 kVA, 616.0 kW, Power Factor cos Phi = 0.8
Operating conditions according to DIN ISO 8528
Speed: 1500 rpm
Design: Stationary

Engine:
Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation routed back into the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible coupling. Electric starter system, engine shutdown system, and electronically controlled speed governor.
Rated Power: 596.0 kW
Rated Speed: 1500 rpm
Cylinders: 8, V-configuration
Displacement: 16,400 cc
Leroy Somer LSA 49.3 M6
4-pole three-phase synchronous generator
Continuous Output: 730.0 kVA at 40°C
Rated Voltage: 400V
Rated Frequency: 50Hz

Manual engine oil change pump (from 700 kVA)
Hand pump for draining the engine oil sump.
Electric engine pre-heater 1000W up to 700 kVA, 1 pc.
The pre-heated coolant circulates in the primary cooling circuit of the engine by convection. Connected to the internal cooling circuit of the engine via flexible hoses, equipped with shut-off valves for maintenance.
Coolant circulation pump
Ensures safe pre-heating of the engine.

Walls and ceiling made of corrugated steel sheet. De-rusting and cleaning by sandblasting of the welded construction. The container is coated inside and outside with seawater-resistant primers and paints.
40" HC High Cube Soundproof Container
Container ISO 1496-1 for power generation units, external dimensions according to ISO 668.
The wall and roof surfaces are insulated with self-extinguishing, oil- and water-resistant sound insulation material and covered with fiberglass mat and electro-galvanized, coated perforated sheet cassettes.
The exhaust silencer is located in a separate compartment within the container. Radiant heat is safely vented vertically with the cooling airflow from the front-mounted cooler.
Intake air openings are integrated into the walls; exhaust air outlet is in the roof.
The silencer exhaust outlet is protected against water ingress with an exhaust flap.
One end face is equipped with a double-leaf door with all-round sealing, serving as a service access.
Side personnel doors with emergency release and all-round sealing allow access for maintenance work.

Codjvyp H Uspfx Abzjgp
The silencer and exhaust compartment are also equipped with an access door.
Plant operation is from the outside.
Controls and instruments are visible through a viewing window, even when the control panel door is closed.
The emergency stop button is safely recessed in a protected housing niche.
Cable entry can be from the side or through the container floor. The floor entry is prepared for annular space seals DN 150.

40" container drip tray according to WHG
Oil-tight welded tread plate floor with min. 50 mm surrounding upstand

And much more ...
Special feature: PARALLEL GRID OPERATION possible!!!

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.